[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20150601082200.GC3329@x1>
Date: Mon, 1 Jun 2015 09:22:00 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Vaibhav Hiremath <vaibhav.hiremath@...aro.org>
Cc: linux-arm-kernel@...ts.infradead.org, robh+dt@...nel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
rtc-linux@...glegroups.com, sameo@...ux.intel.com,
a.zummo@...ertech.it, alexandre.belloni@...e-electrons.com,
Chao Xie <chao.xie@...vell.com>
Subject: Re: [PATCH 4/4] mfd: 88pm800: allocate pdata->rtc if not allocated
earlier
On Sat, 30 May 2015, Vaibhav Hiremath wrote:
> RTC in pmic 88PM800 can run even the core is powered off, and user
> can set alarm in RTC. When the alarm is timed out, the PMIC will power up
> the core, and the whole system will boot up. And during PMIC driver probe,
> it will read some register to find out whether this boot is caused by RTC
> timeout or not, and pass on this information to the RTC driver.
>
> So we need rtc platform data to be existed in PMIC driver to pass this
> information.
>
> Signed-off-by: Chao Xie <chao.xie@...vell.com>
> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@...aro.org>
> ---
> drivers/mfd/88pm800.c | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c
> index 8ea4467..34546a1 100644
> --- a/drivers/mfd/88pm800.c
> +++ b/drivers/mfd/88pm800.c
> @@ -586,6 +586,25 @@ static int pm800_probe(struct i2c_client *client,
> return ret;
> }
>
> + /*
> + * RTC in pmic can run even the core is powered off, and user can set
> + * alarm in RTC. When the alarm is time out, the PMIC will power up
> + * the core, and the whole system will boot up. When PMIC driver is
> + * probed, it will read out some register to find out whether this
> + * boot is caused by RTC timeout or not, and it need pass this
> + * information to RTC driver.
> + * So we need rtc platform data to be existed to pass this information.
> + */
> + if (!pdata->rtc) {
> + pdata->rtc = devm_kzalloc(&client->dev,
> + sizeof(*(pdata->rtc)), GFP_KERNEL);
> + if (!pdata->rtc) {
> + dev_err(&client->dev,
> + "failed to allocate memory for rtc\n");
> + return -ENOMEM;
> + }
> + }
> +
Where is this memory first used?
> ret = pm80x_init(client);
> if (ret) {
> dev_err(&client->dev, "pm800_init fail\n");
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists