lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20150604084434.48939141@bbrezillon>
Date:	Thu, 4 Jun 2015 08:44:34 +0200
From:	Boris Brezillon <boris.brezillon@...e-electrons.com>
To:	Stephen Boyd <sboyd@...eaurora.org>
Cc:	Mike Turquette <mturquette@...aro.org>, linux-clk@...r.kernel.org,
	Mikko Perttunen <mikko.perttunen@...si.fi>,
	Tomeu Vizoso <tomeu.vizoso@...labora.com>,
	Jonathan Corbet <corbet@....net>,
	Tony Lindgren <tony@...mide.com>,
	Ralf Baechle <ralf@...ux-mips.org>,
	Emilio L??pez <emilio@...pez.com.ar>,
	Maxime Ripard <maxime.ripard@...e-electrons.com>,
	Tero Kristo <t-kristo@...com>, linux-doc@...r.kernel.org,
	linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	linux-omap@...r.kernel.org, linux-mips@...ux-mips.org
Subject: Re: [PATCH v3] clk: change clk_ops' ->determine_rate() prototype

Hi Stefen,

On Wed, 3 Jun 2015 16:37:28 -0700
Stephen Boyd <sboyd@...eaurora.org> wrote:

> On 05/20, Boris Brezillon wrote:
> > Clock rates are stored in an unsigned long field, but ->determine_rate()
> > (which returns a rounded rate from a requested one) returns a long
> > value (errors are reported using negative error codes), which can lead
> > to long overflow if the clock rate exceed 2Ghz.
> > 
> > Change ->determine_rate() prototype to return 0 or an error code, and pass
> > a pointer to a clk_rate_request structure containing the expected target
> > rate and the rate constraints imposed by clk users.
> > 
> > The clk_rate_request structure might be extended in the future to contain
> > other kind of constraints like the rounding policy, the maximum clock
> > inaccuracy or other things that are not yet supported by the CCF
> > (power consumption constraints ?).
> > 
> > Signed-off-by: Boris Brezillon <boris.brezillon@...e-electrons.com>
> > 
> > CC: Jonathan Corbet <corbet@....net>
> > CC: Tony Lindgren <tony@...mide.com>
> > CC: Ralf Baechle <ralf@...ux-mips.org>
> > CC: "Emilio López" <emilio@...pez.com.ar>
> > CC: Maxime Ripard <maxime.ripard@...e-electrons.com>
> > CC: Tero Kristo <t-kristo@...com>
> > CC: linux-doc@...r.kernel.org
> > CC: linux-kernel@...r.kernel.org
> > CC: linux-arm-kernel@...ts.infradead.org
> > CC: linux-omap@...r.kernel.org
> > CC: linux-mips@...ux-mips.org
> > ---
> > 
> > Hi Stephen,
> > 
> > This patch is based on clk-next and contains the changes you suggested
> > in your previous review.
> > 
> > It was tested on sama5d4 and compile tested on several ARM platforms
> > (those enabled in multi_v7_defconfig).
> > 
> 
> Thanks. I think we should wait until the next -rc1 drops to apply the
> patch for the next merge window. That will make it least likely to conflict
> with other trees, and we can provide it on a stable branch should there
> be clock providers going through other trees somewhere. Please
> remind me if I forget.

No problem.

> 
> > @@ -1186,15 +1191,21 @@ EXPORT_SYMBOL_GPL(__clk_determine_rate);
> >   */
> >  unsigned long __clk_round_rate(struct clk *clk, unsigned long rate)
> >  {
> > -	unsigned long min_rate;
> > -	unsigned long max_rate;
> > +
> > +	struct clk_rate_request req;
> > +	int ret;
> >  
> >  	if (!clk)
> >  		return 0;
> >  
> > -	clk_core_get_boundaries(clk->core, &min_rate, &max_rate);
> > +	clk_core_get_boundaries(clk->core, &req.min_rate, &req.max_rate);
> > +	req.rate = rate;
> > +
> > +	ret = clk_core_round_rate_nolock(clk->core, &req);
> > +	if (ret)
> > +		return ret;
> 
> This returns a negative int for unsigned long. Is that intentional?

Nope, should be replaced by 'return 0;'.

Thanks,

Boris


-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ