| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20150605002216.GA17429@gwshan>
Date: Fri, 5 Jun 2015 10:22:16 +1000
From: Gavin Shan <gwshan@...ux.vnet.ibm.com>
To: Alexey Kardashevskiy <aik@...abs.ru>
Cc: linuxppc-dev@...ts.ozlabs.org,
Alex Williamson <alex.williamson@...hat.com>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
David Gibson <david@...son.dropbear.id.au>,
Gavin Shan <gwshan@...ux.vnet.ibm.com>,
Paul Mackerras <paulus@...ba.org>, kvm@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH kernel v11 20/34] powerpc/powernv/ioda2: Move TCE kill
register address to PE
On Fri, May 29, 2015 at 06:44:44PM +1000, Alexey Kardashevskiy wrote:
>At the moment the DMA setup code looks for the "ibm,opal-tce-kill"
>property which contains the TCE kill register address. Writing to
>this register invalidates TCE cache on IODA/IODA2 hub.
>
>This moves the register address from iommu_table to pnv_pnb as this
>register belongs to PHB and invalidates TCE cache for all tables of
>all attached PEs.
>
>This moves the property reading/remapping code to a helper which is
>called when DMA is being configured for PE and which does DMA setup
>for both IODA1 and IODA2.
>
>This adds a new pnv_pci_ioda2_tce_invalidate_entire() helper which
>invalidates cache for the entire table. It should be called after
>every call to opal_pci_map_pe_dma_window(). It was not required before
>because there was just a single TCE table and 64bit DMA was handled via
>bypass window (which has no table so no cache was used) but this is going
>to change with Dynamic DMA windows (DDW).
>
>Signed-off-by: Alexey Kardashevskiy <aik@...abs.ru>
Reviewed-by: Gavin Shan <gwshan@...ux.vnet.ibm.com>
Thanks,
Gavin
>---
>Changes:
>v11:
>* s/pnv_pci_ioda2_tvt_invalidate/pnv_pci_ioda2_tce_invalidate_entire/g
>(cannot think of better-and-shorter name)
>* moved tce_inval_reg_phys/tce_inval_reg to pnv_phb
>
>v10:
>* fixed error from checkpatch.pl
>* removed comment at "ibm,opal-tce-kill" parsing as irrelevant
>* s/addr/val/ in pnv_pci_ioda2_tvt_invalidate() as it was not a kernel address
>
>v9:
>* new in the series
>---
> arch/powerpc/platforms/powernv/pci-ioda.c | 66 ++++++++++++++++++-------------
> arch/powerpc/platforms/powernv/pci.h | 7 +++-
> 2 files changed, 44 insertions(+), 29 deletions(-)
>
>diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
>index 1d0bb5b..3fd8b18 100644
>--- a/arch/powerpc/platforms/powernv/pci-ioda.c
>+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
>@@ -1679,8 +1679,8 @@ static void pnv_pci_ioda1_tce_invalidate(struct iommu_table *tbl,
> struct pnv_ioda_pe *pe = container_of(tgl->table_group,
> struct pnv_ioda_pe, table_group);
> __be64 __iomem *invalidate = rm ?
>- (__be64 __iomem *)pe->tce_inval_reg_phys :
>- (__be64 __iomem *)tbl->it_index;
>+ (__be64 __iomem *)pe->phb->ioda.tce_inval_reg_phys :
>+ pe->phb->ioda.tce_inval_reg;
> unsigned long start, end, inc;
> const unsigned shift = tbl->it_page_shift;
>
>@@ -1751,6 +1751,19 @@ static struct iommu_table_ops pnv_ioda1_iommu_ops = {
> .get = pnv_tce_get,
> };
>
>+static inline void pnv_pci_ioda2_tce_invalidate_entire(struct pnv_ioda_pe *pe)
>+{
>+ /* 01xb - invalidate TCEs that match the specified PE# */
>+ unsigned long val = (0x4ull << 60) | (pe->pe_number & 0xFF);
>+ struct pnv_phb *phb = pe->phb;
>+
>+ if (!phb->ioda.tce_inval_reg)
>+ return;
>+
>+ mb(); /* Ensure above stores are visible */
>+ __raw_writeq(cpu_to_be64(val), phb->ioda.tce_inval_reg);
>+}
>+
> static void pnv_pci_ioda2_tce_invalidate(struct iommu_table *tbl,
> unsigned long index, unsigned long npages, bool rm)
> {
>@@ -1761,8 +1774,8 @@ static void pnv_pci_ioda2_tce_invalidate(struct iommu_table *tbl,
> struct pnv_ioda_pe, table_group);
> unsigned long start, end, inc;
> __be64 __iomem *invalidate = rm ?
>- (__be64 __iomem *)pe->tce_inval_reg_phys :
>- (__be64 __iomem *)tbl->it_index;
>+ (__be64 __iomem *)pe->phb->ioda.tce_inval_reg_phys :
>+ pe->phb->ioda.tce_inval_reg;
> const unsigned shift = tbl->it_page_shift;
>
> /* We'll invalidate DMA address in PE scope */
>@@ -1820,7 +1833,6 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
> {
>
> struct page *tce_mem = NULL;
>- const __be64 *swinvp;
> struct iommu_table *tbl;
> unsigned int i;
> int64_t rc;
>@@ -1877,20 +1889,11 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
> base << 28, IOMMU_PAGE_SHIFT_4K);
>
> /* OPAL variant of P7IOC SW invalidated TCEs */
>- swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL);
>- if (swinvp) {
>- /* We need a couple more fields -- an address and a data
>- * to or. Since the bus is only printed out on table free
>- * errors, and on the first pass the data will be a relative
>- * bus number, print that out instead.
>- */
>- pe->tce_inval_reg_phys = be64_to_cpup(swinvp);
>- tbl->it_index = (unsigned long)ioremap(pe->tce_inval_reg_phys,
>- 8);
>+ if (phb->ioda.tce_inval_reg)
> tbl->it_type |= (TCE_PCI_SWINV_CREATE |
> TCE_PCI_SWINV_FREE |
> TCE_PCI_SWINV_PAIR);
>- }
>+
> tbl->it_ops = &pnv_ioda1_iommu_ops;
> iommu_init_table(tbl, phb->hose->node);
>
>@@ -1971,12 +1974,24 @@ static struct iommu_table_group_ops pnv_pci_ioda2_ops = {
> };
> #endif
>
>+static void pnv_pci_ioda_setup_opal_tce_kill(struct pnv_phb *phb)
>+{
>+ const __be64 *swinvp;
>+
>+ /* OPAL variant of PHB3 invalidated TCEs */
>+ swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL);
>+ if (!swinvp)
>+ return;
>+
>+ phb->ioda.tce_inval_reg_phys = be64_to_cpup(swinvp);
>+ phb->ioda.tce_inval_reg = ioremap(phb->ioda.tce_inval_reg_phys, 8);
>+}
>+
> static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
> struct pnv_ioda_pe *pe)
> {
> struct page *tce_mem = NULL;
> void *addr;
>- const __be64 *swinvp;
> struct iommu_table *tbl;
> unsigned int tce_table_size, end;
> int64_t rc;
>@@ -2023,23 +2038,16 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
> goto fail;
> }
>
>+ pnv_pci_ioda2_tce_invalidate_entire(pe);
>+
> /* Setup linux iommu table */
> pnv_pci_setup_iommu_table(tbl, addr, tce_table_size, 0,
> IOMMU_PAGE_SHIFT_4K);
>
> /* OPAL variant of PHB3 invalidated TCEs */
>- swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL);
>- if (swinvp) {
>- /* We need a couple more fields -- an address and a data
>- * to or. Since the bus is only printed out on table free
>- * errors, and on the first pass the data will be a relative
>- * bus number, print that out instead.
>- */
>- pe->tce_inval_reg_phys = be64_to_cpup(swinvp);
>- tbl->it_index = (unsigned long)ioremap(pe->tce_inval_reg_phys,
>- 8);
>+ if (phb->ioda.tce_inval_reg)
> tbl->it_type |= (TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE);
>- }
>+
> tbl->it_ops = &pnv_ioda2_iommu_ops;
> iommu_init_table(tbl, phb->hose->node);
> #ifdef CONFIG_IOMMU_API
>@@ -2095,6 +2103,8 @@ static void pnv_ioda_setup_dma(struct pnv_phb *phb)
> pr_info("PCI: %d PE# for a total weight of %d\n",
> phb->ioda.dma_pe_count, phb->ioda.dma_weight);
>
>+ pnv_pci_ioda_setup_opal_tce_kill(phb);
>+
> /* Walk our PE list and configure their DMA segments, hand them
> * out one base segment plus any residual segments based on
> * weight
>diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
>index 87bdd4f..d1e6978 100644
>--- a/arch/powerpc/platforms/powernv/pci.h
>+++ b/arch/powerpc/platforms/powernv/pci.h
>@@ -58,7 +58,6 @@ struct pnv_ioda_pe {
> int tce32_seg;
> int tce32_segcount;
> struct iommu_table_group table_group;
>- phys_addr_t tce_inval_reg_phys;
>
> /* 64-bit TCE bypass region */
> bool tce_bypass_enabled;
>@@ -187,6 +186,12 @@ struct pnv_phb {
> * boot for resource allocation purposes
> */
> struct list_head pe_dma_list;
>+
>+ /* TCE cache invalidate registers (physical and
>+ * remapped)
>+ */
>+ phys_addr_t tce_inval_reg_phys;
>+ __be64 __iomem *tce_inval_reg;
> } ioda;
> };
>
>--
>2.4.0.rc3.8.gfb3e7d5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists