| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <55760F0F.9010302@rock-chips.com>
Date: Tue, 09 Jun 2015 05:54:23 +0800
From: Caesar Wang <caesar.wang@...k-chips.com>
To: Russell King - ARM Linux <linux@....linux.org.uk>,
Caesar Wang <wxt@...k-chips.com>, dianders@...omium.org
CC: Heiko Stuebner <heiko@...ech.de>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
linux-rockchip@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v5 1/3] ARM: rockchip: fix the CPU soft reset
在 2015年06月08日 17:24, Russell King - ARM Linux 写道:
> On Mon, Jun 08, 2015 at 03:11:34PM +0800, Caesar Wang wrote:
>> We need different orderings when turning a core on and turning a core
>> off. In one case we need to assert reset before turning power off.
>> In ther other case we need to turn power on and the deassert reset.
>>
>> In general, the correct flow is:
>>
>> CPU off:
>> reset_control_assert
>> regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), BIT(pd))
>> wait_for_power_domain_to_turn_off
>> CPU on:
>> regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), 0)
>> wait_for_power_domain_to_turn_on
>> reset_control_deassert
>>
>> This is needed for stressing CPU up/down, as per:
>> cd /sys/devices/system/cpu/
>> for i in $(seq 10000); do
>> echo "================= $i ============"
>> for j in $(seq 100); do
>> while [[ "$(cat cpu1/online)$(cat cpu2/online)$(cat cpu3/online)" != "000"" ]]
>> echo 0 > cpu1/online
>> echo 0 > cpu2/online
>> echo 0 > cpu3/online
>> done
>> while [[ "$(cat cpu1/online)$(cat cpu2/online)$(cat cpu3/online)" != "111" ]]; do
>> echo 1 > cpu1/online
>> echo 1 > cpu2/online
>> echo 1 > cpu3/online
>> done
>> done
>> done
>>
>> The following is reproducile log:
> "reproducable"
>
>> [34466.186812] PM: noirq suspend of devices complete after 0.669 msecs
>> [34466.186824] Disabling non-boot CPUs ...
>> [34466.187509] CPU1: shutdown
>> [34466.188672] CPU2: shutdown
>> [34473.736627] Kernel panic - not syncing:Watchdog detected hard LOCKUP on cpu 0
>> .......
>> or others similar log:
>> .......
>> [ 4072.454453] CPU1: shutdown
>> [ 4072.504436] CPU2: shutdown
>> [ 4072.554426] CPU3: shutdown
>> [ 4072.577827] CPU1: Booted secondary processor
>> [ 4072.582611] CPU2: Booted secondary processor
>> [ 4072.587426] CPU3: Booted secondary processor
>> <hang>
>>
>> Signed-off-by: Caesar Wang <wxt@...k-chips.com>
>> Reviewed-by: Doug Anderson <dianders@...omium.org>
>>
>> Changes in v5:
>> - back to v2 cpu on/off flow, As Heiko point out in patch v3.
>> - delay more time in rockchip_boot_secondary().
>> From CPU up/down tests, Needed more time to complete CPU process.
>> In order to ensure a more, Here that be delayed 1ms.
>>
>> Changes in v4:
>> - Add reset_control_put(rstc) for the non-error case.
>>
>> Changes in v3:
>> - FIx the PATCH v2, it doesn't work on chromium 3.14.
>>
>> Changes in v2:
>> - As Heiko suggestion, re-adjust the cpu on/off flow.
>> CPU off:
>> reset_control_assert
>> regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), BIT(pd))
>> wait_for_power_domain_to_turn_off
>> CPU on:
>> regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), 0)
>> wait_for_power_domain_to_turn_on
>> reset_control_deassert
>>
>> ---
>>
>> arch/arm/mach-rockchip/platsmp.c | 18 ++++++++++--------
>> 1 file changed, 10 insertions(+), 8 deletions(-)
>>
>> diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c
>> index 5b4ca3c..bd40852 100644
>> --- a/arch/arm/mach-rockchip/platsmp.c
>> +++ b/arch/arm/mach-rockchip/platsmp.c
>> @@ -72,6 +72,7 @@ static struct reset_control *rockchip_get_core_reset(int cpu)
>> static int pmu_set_power_domain(int pd, bool on)
>> {
>> u32 val = (on) ? 0 : BIT(pd);
>> + struct reset_control *rstc = rockchip_get_core_reset(pd);
>> int ret;
>>
>> /*
>> @@ -80,20 +81,15 @@ static int pmu_set_power_domain(int pd, bool on)
>> * processor is powered down.
>> */
>> if (read_cpuid_part() != ARM_CPU_PART_CORTEX_A9) {
>> - struct reset_control *rstc = rockchip_get_core_reset(pd);
>> -
>> + /* We only require the reset on the RK3288 at the moment */
>> if (IS_ERR(rstc)) {
>> pr_err("%s: could not get reset control for core %d\n",
>> __func__, pd);
>> return PTR_ERR(rstc);
>> }
>>
>> - if (on)
>> - reset_control_deassert(rstc);
>> - else
>> + if (!on)
>> reset_control_assert(rstc);
>> -
>> - reset_control_put(rstc);
>> }
>>
>> ret = regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), val);
>> @@ -112,6 +108,12 @@ static int pmu_set_power_domain(int pd, bool on)
>> }
>> }
>>
>> + if (read_cpuid_part() != ARM_CPU_PART_CORTEX_A9 && on)
>> + reset_control_deassert(rstc);
>> +
>> + if (!IS_ERR(rstc))
>> + reset_control_put(rstc);
>> +
>> return 0;
>> }
>>
>> @@ -148,7 +150,7 @@ static int __cpuinit rockchip_boot_secondary(unsigned int cpu,
>> * sram_base_addr + 4: 0xdeadbeaf
>> * sram_base_addr + 8: start address for pc
>> * */
>> - udelay(10);
>> + mdelay(1);
> The reason for this delay needs a comment, as it's not obvious why you
> would need to delay before writing to the SRAM. Also documenting in
> a comment why the delay is necessary would be good.
>
Sorry for delay, I wait a better solution for this.
We don't need any 10us delay or 1m delay, I think.
- udelay(10);
+ while (readl(sram_base_addr + 4 ) != 1); //lock =1
We need do that if i'm correct from the bootrom code.
Tested are pass over 120000 cycles on today, I will wait more testing
cycles to confirm that's ok.
--
**************************************************************************************
王晓腾 Caesar Wang
Product R&D Dept.III
Fuzhou Rockchip Electronics Co.Ltd
Addr： NO.18 Building, A District, Fuzhou Software Park,Gulou District,Fuzhou, Fujian,China(Fuzhou Headquarters)
21F,Malata Building,Kejizhongyi Avenue,Nanshan District,Shenzhen (Shenzhen Office)
Tel：+86-591-83991906/07 - 8221
Mobile:+86 15059456742
E-mail : wxt@...k-chips.com
***************************************************************************************
***************************************************************************************
IMPORTANT NOTICE: This email is from Fuzhou Rockchip Electronics Co., Ltd .The contents of this email and any attachments may
contain information that is privileged, confidential and/or exempt from disclosure under applicable law and relevant NDA.
If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the
information is STRICTLY PROHIBITED. Please immediately contact the sender as soon as possible and destroy the material
in its entirety in any format. Thank you.
***************************************************************************************
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists