Message-ID: <20150610183619.GA3103@Asurada-CZ80>
Date:	Wed, 10 Jun 2015 11:36:21 -0700
From:	Nicolin Chen <nicoleotsuka@...il.com>
To:	Zidan Wang <zidan.wang@...escale.com>
Cc:	broonie@...nel.org, perex@...ex.cz, tiwai@...e.de, timur@...i.org,
	Xiubo.Lee@...il.com, devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org, alsa-devel@...a-project.org,
	linuxppc-dev@...ts.ozlabs.org
Subject: Re: [alsa-devel][PATCH] ASoC: fsl: add imx-wm8960 machine driver

On Wed, Jun 10, 2015 at 04:26:27PM +0800, Zidan Wang wrote:
> This imx-wm8960 device-tree-only machine driver works with sai driver
> and have below feature.
> * support codec master and slave mode
> * support headphone jack detect
> * support headphone and micphone jack event
> * support asrc<->sai<->wm8960 mode
> 
> Signed-off-by: Zidan Wang <zidan.wang@...escale.com>

Above all, could you merge this into fsl-asoc-card?

It'd be nicer to have jack detection over there. And we can
put PLL settings to the codec driver as Mark suggested.

Thanks
Nicolin

> ---
>  .../devicetree/bindings/sound/imx-audio-wm8960.txt |  68 ++
>  sound/soc/fsl/Kconfig                              |  13 +
>  sound/soc/fsl/Makefile                             |   2 +
>  sound/soc/fsl/imx-wm8960.c                         | 711 +++++++++++++++++++++
>  4 files changed, 794 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/imx-audio-wm8960.txt
>  create mode 100644 sound/soc/fsl/imx-wm8960.c
> 
> diff --git a/Documentation/devicetree/bindings/sound/imx-audio-wm8960.txt b/Documentation/devicetree/bindings/sound/imx-audio-wm8960.txt
> new file mode 100644
> index 0000000..300d027
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/imx-audio-wm8960.txt
> @@ -0,0 +1,68 @@
> +Freescale i.MX audio complex with WM8960 codec
> +
> +Required properties:
> +
> +  - compatible		: "fsl,imx-audio-wm8960"
> +
> +  - model		: The user-visible name of this sound complex
> +
> +  - audio-codec		: The phandle of the WM8960 audio codec
> +
> +  - hp-det		: ADCLRC/GPIO1, LINPUT3/JD2 and RINPUT3/JD3 pins can
> +			  be selected as headphone jack detect inputs to
> +			  automatically disable the speaker output and enable
> +			  the headphone output.
> +			  hp-det = <hp-det-pin hp-det-polarity>;
> +			  hp-det-pin = 1: ADCLRC/GPIO1 used as detect pin
> +			  hp-det-pin = 2: LINPUT3/JD2 used as detect pin
> +			  hp-det-pin = 3: RINPUT3/JD3 used as detect pin
> +			  hp-det-polarity = 0: hp detect high for headphone
> +			  hp-det-polarity = 1: hp detect high for speaker
> +
> +  - codec-master	: If "codec-master" present, codec works as master.
> +			  Otherwise, codec works as slave.
> +
> +  - audio-routing	: A list of the connections between audio components.
> +			  Each entry is a pair of strings, the first being the
> +			  connection's sink, the second being the connection's
> +			  source. Valid names could be power supplies, WM8962
> +			  pins, and the jacks on the board:
> +
> +			  Power supplies:
> +			   * MICB
> +
> +			  Board connectors:
> +			   * Hp MIC
> +			   * Main MIC
> +			   * Headset Jack
> +			   * Ext Spk
> +
> +Example:
> +
> +sound {
> +		compatible = "fsl,imx6ul-evk-wm8960",
> +			   "fsl,imx-audio-wm8960";
> +		model = "wm8960-audio";
> +		cpu-dai = <&sai2>;
> +		audio-codec = <&codec>;
> +		asrc-controller = <&asrc>;
> +		codec-master;
> +		hp-det = <3 0>;
> +		audio-routing =
> +			"Headset Jack", "HP_L",
> +			"Headset Jack", "HP_R",
> +			"Ext Spk", "SPK_LP",
> +			"Ext Spk", "SPK_LN",
> +			"Ext Spk", "SPK_RP",
> +			"Ext Spk", "SPK_RN",
> +			"LINPUT2", "Hp MIC",
> +			"LINPUT3", "Hp MIC",
> +			"RINPUT1", "Main MIC",
> +			"RINPUT2", "Main MIC",
> +			"Hp MIC", "MICB",
> +			"Main MIC", "MICB",
> +			"CPU-Playback", "ASRC-Playback",
> +			"Playback", "CPU-Playback",
> +			"ASRC-Capture", "CPU-Capture",
> +			"CPU-Capture", "Capture";
> +};
> diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
> index 19c302b..0d9aa56 100644
> --- a/sound/soc/fsl/Kconfig
> +++ b/sound/soc/fsl/Kconfig
> @@ -229,6 +229,19 @@ config SND_SOC_EUKREA_TLV320
>  	  Enable I2S based access to the TLV320AIC23B codec attached
>  	  to the SSI interface
>  
> +config SND_SOC_IMX_WM8960
> +	tristate "SoC Audio support for i.MX boards with wm8960"
> +	depends on OF && I2C
> +	select SND_SOC_WM8960
> +	select SND_SOC_IMX_PCM_DMA
> +	select SND_SOC_FSL_SAI
> +	select SND_SOC_FSL_UTILS
> +	select SND_KCTL_JACK
> +	help
> +	 SoC Audio support for i.MX boards with WM8960
> +	 Say Y if you want to add support for SoC audio on an i.MX board with
> +	 a wm8960 codec.
> +
>  config SND_SOC_IMX_WM8962
>  	tristate "SoC Audio support for i.MX boards with wm8962"
>  	depends on OF && I2C && INPUT
> diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
> index d28dc25..84a9a10 100644
> --- a/sound/soc/fsl/Makefile
> +++ b/sound/soc/fsl/Makefile
> @@ -54,6 +54,7 @@ snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o
>  snd-soc-wm1133-ev1-objs := wm1133-ev1.o
>  snd-soc-imx-es8328-objs := imx-es8328.o
>  snd-soc-imx-sgtl5000-objs := imx-sgtl5000.o
> +snd-soc-imx-wm8960-objs := imx-wm8960.o
>  snd-soc-imx-wm8962-objs := imx-wm8962.o
>  snd-soc-imx-spdif-objs := imx-spdif.o
>  snd-soc-imx-mc13783-objs := imx-mc13783.o
> @@ -64,6 +65,7 @@ obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o
>  obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o
>  obj-$(CONFIG_SND_SOC_IMX_ES8328) += snd-soc-imx-es8328.o
>  obj-$(CONFIG_SND_SOC_IMX_SGTL5000) += snd-soc-imx-sgtl5000.o
> +obj-$(CONFIG_SND_SOC_IMX_WM8960) += snd-soc-imx-wm8960.o
>  obj-$(CONFIG_SND_SOC_IMX_WM8962) += snd-soc-imx-wm8962.o
>  obj-$(CONFIG_SND_SOC_IMX_SPDIF) += snd-soc-imx-spdif.o
>  obj-$(CONFIG_SND_SOC_IMX_MC13783) += snd-soc-imx-mc13783.o
> diff --git a/sound/soc/fsl/imx-wm8960.c b/sound/soc/fsl/imx-wm8960.c
> new file mode 100644
> index 0000000..ddd17cb
> --- /dev/null
> +++ b/sound/soc/fsl/imx-wm8960.c
> @@ -0,0 +1,711 @@
> +/*
> + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/i2c.h>
> +#include <linux/of_gpio.h>
> +#include <linux/slab.h>
> +#include <linux/gpio.h>
> +#include <linux/clk.h>
> +#include <sound/soc.h>
> +#include <sound/jack.h>
> +#include <sound/control.h>
> +#include <sound/pcm_params.h>
> +#include <sound/soc-dapm.h>
> +#include <linux/pinctrl/consumer.h>
> +#include <linux/mfd/syscon.h>
> +#include "../codecs/wm8960.h"
> +
> +#define DAI_NAME_SIZE	32
> +
> +struct imx_wm8960_data {
> +	struct snd_soc_card card;
> +	char codec_dai_name[DAI_NAME_SIZE];
> +	char platform_name[DAI_NAME_SIZE];
> +	struct clk *codec_clk;
> +	unsigned int clk_frequency;
> +	bool is_codec_master;
> +	bool is_stream_in_use[2];
> +	struct regmap *gpr;
> +	unsigned int hp_det[2];
> +	u32 asrc_rate;
> +	u32 asrc_format;
> +};
> +
> +struct imx_priv {
> +	int hp_set_gpio;
> +	int hp_active_low;
> +	struct snd_kcontrol *headset_kctl;
> +	struct snd_soc_codec *codec;
> +	struct platform_device *pdev;
> +	struct platform_device *asrc_pdev;
> +	struct snd_card *snd_card;
> +};
> +
> +static struct imx_priv card_priv;
> +
> +static struct snd_soc_jack imx_hp_set;
> +static struct snd_soc_jack_pin imx_hp_set_pins[] = {
> +	{
> +		.pin = "Headset Jack",
> +		.mask = SND_JACK_HEADSET,
> +	},
> +};
> +static struct snd_soc_jack_gpio imx_hp_set_gpio = {
> +	.name = "headset detect",
> +	.report = SND_JACK_HEADSET,
> +	.debounce_time = 250,
> +	.invert = 1,
> +};
> +
> +static int hp_set_status_check(void *data)
> +{
> +	struct imx_priv *priv = &card_priv;
> +	struct platform_device *pdev = priv->pdev;
> +	char *envp[3], *buf;
> +	int hp_status, ret;
> +
> +	if (!gpio_is_valid(priv->hp_set_gpio))
> +		return 0;
> +
> +	hp_status = gpio_get_value(priv->hp_set_gpio) ? 1 : 0;
> +	buf = kmalloc(32, GFP_ATOMIC);
> +	if (!buf) {
> +		dev_err(&pdev->dev, "%s kmalloc failed\n", __func__);
> +		return -ENOMEM;
> +	}
> +
> +	if (hp_status != priv->hp_active_low) {
> +		snprintf(buf, 32, "STATE=%d", 2);
> +		snd_soc_dapm_disable_pin(&priv->codec->dapm, "Ext Spk");
> +		snd_soc_dapm_disable_pin(&priv->codec->dapm, "Main MIC");
> +		ret = imx_hp_set_gpio.report;
> +
> +		/*
> +		 *  As the hp MIC only connect the input for left channel, we
> +		 *  need to route it for right channel.
> +		 */
> +		snd_soc_update_bits(priv->codec, WM8960_ADDCTL1, 3<<2, 1<<2);
> +
> +		snd_kctl_jack_report(priv->snd_card, priv->headset_kctl, 1);
> +	} else {
> +		snprintf(buf, 32, "STATE=%d", 0);
> +		snd_soc_dapm_enable_pin(&priv->codec->dapm, "Ext Spk");
> +		snd_soc_dapm_enable_pin(&priv->codec->dapm, "Main MIC");
> +		ret = 0;
> +
> +		/*
> +		 *  As the Main MIC only connect the input for right channel,
> +		 *  we need to route it for left channel.
> +		 */
> +		snd_soc_update_bits(priv->codec, WM8960_ADDCTL1, 3<<2, 2<<2);
> +
> +		snd_kctl_jack_report(priv->snd_card, priv->headset_kctl, 0);
> +	}
> +
> +	envp[0] = "NAME=headset";
> +	envp[1] = buf;
> +	envp[2] = NULL;
> +	kobject_uevent_env(&pdev->dev.kobj, KOBJ_CHANGE, envp);
> +	kfree(buf);
> +
> +	return ret;
> +}
> +
> +static const struct snd_soc_dapm_widget imx_wm8960_dapm_widgets[] = {
> +	SND_SOC_DAPM_HP("Headset Jack", NULL),
> +	SND_SOC_DAPM_SPK("Ext Spk", NULL),
> +	SND_SOC_DAPM_MIC("Hp MIC", NULL),
> +	SND_SOC_DAPM_MIC("Main MIC", NULL),
> +};
> +
> +static int imx_wm8960_gpio_init(struct snd_soc_card *card)
> +{
> +	struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
> +	struct snd_soc_codec *codec = codec_dai->codec;
> +	struct imx_priv *priv = &card_priv;
> +	int ret;
> +
> +	priv->codec = codec;
> +
> +	if (gpio_is_valid(priv->hp_set_gpio)) {
> +		imx_hp_set_gpio.gpio = priv->hp_set_gpio;
> +		imx_hp_set_gpio.jack_status_check = hp_set_status_check;
> +
> +		ret = snd_soc_card_jack_new(card, "Headset Jack",
> +				SND_JACK_HEADSET, &imx_hp_set,
> +				imx_hp_set_pins, ARRAY_SIZE(imx_hp_set_pins));
> +		if (ret)
> +			return ret;
> +		ret = snd_soc_jack_add_gpios(&imx_hp_set, 1,
> +						&imx_hp_set_gpio);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static ssize_t show_headphone(struct device_driver *dev, char *buf)
> +{
> +	struct imx_priv *priv = &card_priv;
> +	int hp_status;
> +
> +	if (!gpio_is_valid(priv->hp_set_gpio)) {
> +		strcpy(buf, "no detect gpio connected\n");
> +		return strlen(buf);
> +	}
> +
> +	/* Check if headphone is plugged in */
> +	hp_status = gpio_get_value(priv->hp_set_gpio) ? 1 : 0;
> +
> +	if (hp_status != priv->hp_active_low)
> +		strcpy(buf, "Headphone\n");
> +	else
> +		strcpy(buf, "Speaker\n");
> +
> +	return strlen(buf);
> +}
> +
> +static ssize_t show_micphone(struct device_driver *dev, char *buf)
> +{
> +	struct imx_priv *priv = &card_priv;
> +	int hp_status;
> +
> +	if (!gpio_is_valid(priv->hp_set_gpio)) {
> +		strcpy(buf, "no detect gpio connected\n");
> +		return strlen(buf);
> +	}
> +
> +	/* Check if headphone is plugged in */
> +	hp_status = gpio_get_value(priv->hp_set_gpio) ? 1 : 0;
> +
> +	if (hp_status != priv->hp_active_low)
> +		strcpy(buf, "Hp MIC\n");
> +	else
> +		strcpy(buf, "Main MIC\n");
> +
> +	return strlen(buf);
> +}
> +static DRIVER_ATTR(headphone, S_IRUGO | S_IWUSR, show_headphone, NULL);
> +static DRIVER_ATTR(micphone, S_IRUGO | S_IWUSR, show_micphone, NULL);
> +
> +static void wm8960_init(struct snd_soc_card *card)
> +{
> +	struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
> +	struct snd_soc_codec *codec = codec_dai->codec;
> +	struct imx_wm8960_data *data = snd_soc_card_get_drvdata(card);
> +
> +	/*
> +	 * codec ADCLRC pin configured as GPIO, DACLRC pin is used as
> +	 * a frame clock for ADCs and DACs
> +	 */
> +	snd_soc_update_bits(codec, WM8960_IFACE2, 1<<6, 1<<6);
> +
> +	/* GPIO1 used as headphone detect output */
> +	snd_soc_update_bits(codec, WM8960_ADDCTL4, 7<<4, 3<<4);
> +
> +	/* Enable headphone jack detect */
> +	snd_soc_update_bits(codec, WM8960_ADDCTL2, 1<<6, 1<<6);
> +	snd_soc_update_bits(codec, WM8960_ADDCTL2, 1<<5, data->hp_det[1]<<5);
> +	snd_soc_update_bits(codec, WM8960_ADDCTL4, 3<<2, data->hp_det[0]<<2);
> +	snd_soc_update_bits(codec, WM8960_ADDCTL1, 3, 3);
> +
> +	/* route ADC left channel to right channel in default */
> +	snd_soc_update_bits(codec, WM8960_ADDCTL1, 3<<2, 1<<2);
> +}
> +
> +/* -1 for reserved value */
> +static const int sysclk_divs[] = { 1, -1, 2, -1 };
> +
> +/* Multiply 256 for internal 256 div */
> +static const int dac_divs[] = { 256, 384, 512, 768, 1024, 1408, 1536 };
> +
> +/* Multiply 10 to eliminate decimials */
> +static const int bclk_divs[] = {
> +	10, 15, 20, 30, 40, 55, 60, 80, 110,
> +	120, 160, 220, 240, 320, 320, 320
> +};
> +
> +static int imx_hifi_hw_params(struct snd_pcm_substream *substream,
> +		struct snd_pcm_hw_params *params)
> +{
> +	struct snd_soc_pcm_runtime *rtd = substream->private_data;
> +	struct snd_soc_dai *codec_dai = rtd->codec_dai;
> +	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
> +	struct snd_soc_card *card = rtd->card;
> +	struct imx_wm8960_data *data = snd_soc_card_get_drvdata(card);
> +	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
> +	struct device *dev = card->dev;
> +	unsigned int sample_rate = params_rate(params);
> +	unsigned int sysclk, pll_in, pll_out;
> +	int i, j, k, ret = 0;
> +	int bclk = snd_soc_params_to_bclk(params);
> +	unsigned int fmt, plln;
> +
> +	if (params_channels(params) == 1)
> +		bclk *= 2;
> +
> +	data->is_stream_in_use[tx] = true;
> +
> +	if (data->is_stream_in_use[!tx])
> +		return 0;
> +
> +	if (data->is_codec_master)
> +		fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
> +			SND_SOC_DAIFMT_CBM_CFM;
> +	else
> +		fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
> +			SND_SOC_DAIFMT_CBS_CFS;
> +
> +	/* set cpu DAI configuration */
> +	ret = snd_soc_dai_set_fmt(cpu_dai, fmt);
> +	if (ret) {
> +		dev_err(dev, "failed to set cpu dai fmt: %d\n", ret);
> +		return ret;
> +	}
> +	/* set codec DAI configuration */
> +	ret = snd_soc_dai_set_fmt(codec_dai, fmt);
> +	if (ret) {
> +		dev_err(dev, "failed to set codec dai fmt: %d\n", ret);
> +		return ret;
> +	}
> +
> +	if (!data->is_codec_master) {
> +		ret = snd_soc_dai_set_tdm_slot(cpu_dai,
> +				0, 0, 2, params_width(params));
> +		if (ret) {
> +			dev_err(dev,
> +				"failed to set cpu dai tdm slot: %d\n", ret);
> +			return ret;
> +		}
> +
> +		ret = snd_soc_dai_set_sysclk(cpu_dai, 0, 0, SND_SOC_CLOCK_OUT);
> +		if (ret) {
> +			dev_err(dev, "failed to set cpu sysclk: %d\n", ret);
> +			return ret;
> +		}
> +		return 0;
> +	} else {
> +		ret = snd_soc_dai_set_sysclk(cpu_dai, 0, 0, SND_SOC_CLOCK_IN);
> +		if (ret) {
> +			dev_err(dev, "failed to set cpu sysclk: %d\n", ret);
> +			return ret;
> +		}
> +	}
> +
> +	data->clk_frequency = clk_get_rate(data->codec_clk);
> +
> +	/* Use MCLK to provide sysclk directly */
> +	sysclk = data->clk_frequency;
> +
> +	for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) {
> +		if (sysclk_divs[i] == -1)
> +			continue;
> +		sysclk /= sysclk_divs[i];
> +		for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) {
> +			if (sysclk == sample_rate * dac_divs[j]) {
> +				for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k)
> +					if (sysclk == bclk * bclk_divs[k] / 10)
> +						break;
> +				if (k != ARRAY_SIZE(bclk_divs))
> +					break;
> +			}
> +		}
> +		if (j != ARRAY_SIZE(dac_divs))
> +			break;
> +	}
> +	if (i != ARRAY_SIZE(sysclk_divs)) {
> +		/* Set codec sysclk */
> +		snd_soc_dai_set_sysclk(codec_dai,
> +				       WM8960_SYSCLK_MCLK, sysclk, 0);
> +		snd_soc_dai_set_clkdiv(codec_dai, WM8960_SYSCLKDIV, i << 1);
> +		return 0;
> +	}
> +
> +	/* Use PLL to provide sysclk */
> +	pll_in = data->clk_frequency;
> +
> +	for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) {
> +		if (sysclk_divs[i] == -1)
> +			continue;
> +		for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) {
> +			sysclk = sample_rate * dac_divs[j];
> +			pll_out = sysclk * sysclk_divs[i];
> +			/*
> +			 * we should make sure 5 < plln < 13, or we can't get
> +			 * such pll_out.
> +			 */
> +			plln = pll_out * 4 / pll_in;
> +			if (plln < 6)
> +				plln *= 2;
> +			if ((plln < 6) || (plln > 12))
> +				continue;
> +			for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) {
> +				if (sysclk == bclk * bclk_divs[k] / 10) {
> +					/* Set codec pll */
> +					ret = snd_soc_dai_set_pll(codec_dai, 0,
> +							0, data->clk_frequency,
> +							pll_out);
> +					if (ret != 0)
> +						continue;
> +					else
> +						break;
> +				}
> +			}
> +			if (k != ARRAY_SIZE(bclk_divs))
> +				break;
> +		}
> +		if (j != ARRAY_SIZE(dac_divs))
> +			break;
> +	}
> +	if (i != ARRAY_SIZE(sysclk_divs)) {
> +		/* Set codec sysclk */
> +		snd_soc_dai_set_sysclk(codec_dai, WM8960_SYSCLK_PLL, sysclk, 0);
> +		snd_soc_dai_set_clkdiv(codec_dai, WM8960_SYSCLKDIV, i << 1);
> +		return 0;
> +	}
> +
> +	dev_err(dev, "failed to configure system clock");
> +	return -EINVAL;
> +}
> +
> +static int imx_hifi_hw_free(struct snd_pcm_substream *substream)
> +{
> +	struct snd_soc_pcm_runtime *rtd = substream->private_data;
> +	struct snd_soc_dai *codec_dai = rtd->codec_dai;
> +	struct snd_soc_card *card = rtd->card;
> +	struct imx_wm8960_data *data = snd_soc_card_get_drvdata(card);
> +	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
> +
> +	data->is_stream_in_use[tx] = false;
> +
> +	/* Power down PLL to save power*/
> +	if (data->is_codec_master && !data->is_stream_in_use[!tx])
> +		snd_soc_dai_set_pll(codec_dai, 0, 0, 0, 0);
> +
> +	return 0;
> +}
> +
> +static u32 imx_wm8960_rates[] = { 8000, 16000, 32000, 48000 };
> +static struct snd_pcm_hw_constraint_list imx_wm8960_rate_constraints = {
> +	.count = ARRAY_SIZE(imx_wm8960_rates),
> +	.list = imx_wm8960_rates,
> +};
> +
> +static int imx_hifi_startup(struct snd_pcm_substream *substream)
> +{
> +	struct snd_soc_pcm_runtime *rtd = substream->private_data;
> +	struct snd_soc_card *card = rtd->card;
> +	struct imx_wm8960_data *data = snd_soc_card_get_drvdata(card);
> +	int ret = 0;
> +
> +	if (!data->is_codec_master) {
> +		ret = snd_pcm_hw_constraint_list(substream->runtime, 0,
> +				SNDRV_PCM_HW_PARAM_RATE,
> +				&imx_wm8960_rate_constraints);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	/* codec mclk should be enabled early to avoid jack detect error */
> +	ret = clk_prepare_enable(data->codec_clk);
> +	if (ret) {
> +		dev_err(card->dev, "Failed to enable MCLK: %d\n", ret);
> +		return ret;
> +	}
> +
> +	return ret;
> +}
> +
> +static void imx_hifi_shutdown(struct snd_pcm_substream *substream)
> +{
> +	struct snd_soc_pcm_runtime *rtd = substream->private_data;
> +	struct snd_soc_card *card = rtd->card;
> +	struct imx_wm8960_data *data = snd_soc_card_get_drvdata(card);
> +
> +	clk_disable_unprepare(data->codec_clk);
> +}
> +
> +static struct snd_soc_ops imx_hifi_ops = {
> +	.hw_params = imx_hifi_hw_params,
> +	.hw_free = imx_hifi_hw_free,
> +	.startup   = imx_hifi_startup,
> +	.shutdown  = imx_hifi_shutdown,
> +};
> +
> +static int imx_wm8960_late_probe(struct snd_soc_card *card)
> +{
> +	struct imx_wm8960_data *data = snd_soc_card_get_drvdata(card);
> +
> +	/* set SAI2_MCLK_DIR to enable codec MCLK */
> +	if (data->gpr)
> +		regmap_update_bits(data->gpr, 4, 1<<20, 1<<20);
> +
> +	wm8960_init(card);
> +	return 0;
> +}
> +
> +static int be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd,
> +			struct snd_pcm_hw_params *params)
> +{
> +	struct snd_soc_card *card = rtd->card;
> +	struct imx_wm8960_data *data = snd_soc_card_get_drvdata(card);
> +	struct imx_priv *priv = &card_priv;
> +	struct snd_interval *rate;
> +	struct snd_mask *mask;
> +
> +	if (!priv->asrc_pdev)
> +		return -EINVAL;
> +
> +	rate = hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE);
> +	rate->max = rate->min = data->asrc_rate;
> +
> +	mask = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
> +	snd_mask_none(mask);
> +	snd_mask_set(mask, data->asrc_format);
> +
> +	return 0;
> +}
> +
> +static struct snd_soc_dai_link imx_wm8960_dai[] = {
> +	{
> +		.name = "HiFi",
> +		.stream_name = "HiFi",
> +		.codec_dai_name = "wm8960-hifi",
> +		.ops = &imx_hifi_ops,
> +	},
> +	{
> +		.name = "HiFi-ASRC-FE",
> +		.stream_name = "HiFi-ASRC-FE",
> +		.codec_name = "snd-soc-dummy",
> +		.codec_dai_name = "snd-soc-dummy-dai",
> +		.dynamic = 1,
> +		.ignore_pmdown_time = 1,
> +		.dpcm_playback = 1,
> +		.dpcm_capture = 1,
> +	},
> +	{
> +		.name = "HiFi-ASRC-BE",
> +		.stream_name = "HiFi-ASRC-BE",
> +		.codec_dai_name = "wm8960-hifi",
> +		.platform_name = "snd-soc-dummy",
> +		.no_pcm = 1,
> +		.ignore_pmdown_time = 1,
> +		.dpcm_playback = 1,
> +		.dpcm_capture = 1,
> +		.ops = &imx_hifi_ops,
> +		.be_hw_params_fixup = be_hw_params_fixup,
> +	},
> +};
> +
> +static int imx_wm8960_probe(struct platform_device *pdev)
> +{
> +	struct device_node *cpu_np, *codec_np, *gpr_np;
> +	struct platform_device *cpu_pdev;
> +	struct imx_priv *priv = &card_priv;
> +	struct i2c_client *codec_dev;
> +	struct imx_wm8960_data *data;
> +	struct platform_device *asrc_pdev = NULL;
> +	struct device_node *asrc_np;
> +	u32 width;
> +	int ret;
> +
> +	priv->pdev = pdev;
> +
> +	cpu_np = of_parse_phandle(pdev->dev.of_node, "cpu-dai", 0);
> +	if (!cpu_np) {
> +		dev_err(&pdev->dev, "cpu dai phandle missing or invalid\n");
> +		ret = -EINVAL;
> +		goto fail;
> +	}
> +
> +	codec_np = of_parse_phandle(pdev->dev.of_node, "audio-codec", 0);
> +	if (!codec_np) {
> +		dev_err(&pdev->dev, "phandle missing or invalid\n");
> +		ret = -EINVAL;
> +		goto fail;
> +	}
> +
> +	cpu_pdev = of_find_device_by_node(cpu_np);
> +	if (!cpu_pdev) {
> +		dev_err(&pdev->dev, "failed to find SAI platform device\n");
> +		ret = -EINVAL;
> +		goto fail;
> +	}
> +
> +	codec_dev = of_find_i2c_device_by_node(codec_np);
> +	if (!codec_dev || !codec_dev->dev.driver) {
> +		dev_err(&pdev->dev, "failed to find codec platform device\n");
> +		ret = -EINVAL;
> +		goto fail;
> +	}
> +
> +	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> +	if (!data) {
> +		ret = -ENOMEM;
> +		goto fail;
> +	}
> +
> +	if (of_property_read_bool(pdev->dev.of_node, "codec-master"))
> +		data->is_codec_master = true;
> +
> +	data->codec_clk = devm_clk_get(&codec_dev->dev, "mclk");
> +	if (IS_ERR(data->codec_clk)) {
> +		ret = PTR_ERR(data->codec_clk);
> +		dev_err(&pdev->dev, "failed to get codec clk: %d\n", ret);
> +		goto fail;
> +	}
> +
> +	gpr_np = of_parse_phandle(pdev->dev.of_node, "gpr", 0);
> +	if (gpr_np) {
> +		data->gpr = syscon_node_to_regmap(gpr_np);
> +		if (IS_ERR(data->gpr)) {
> +			ret = PTR_ERR(data->gpr);
> +			dev_err(&pdev->dev, "failed to get gpr regmap\n");
> +			goto fail;
> +		}
> +	}
> +
> +	/*
> +	 * hp-det = <hp-det-pin hp-det-polarity>;
> +	 * hp-det-pin: JD1 JD2 or JD3
> +	 * hp-det-polarity = 0: hp detect high for headphone
> +	 * hp-det-polarity = 1: hp detect high for speaker
> +	 */
> +	of_property_read_u32_array(pdev->dev.of_node,
> +				   "hp-det", data->hp_det, 2);
> +
> +	asrc_np = of_parse_phandle(pdev->dev.of_node, "asrc-controller", 0);
> +	if (asrc_np) {
> +		asrc_pdev = of_find_device_by_node(asrc_np);
> +		priv->asrc_pdev = asrc_pdev;
> +	}
> +
> +	data->card.dai_link = imx_wm8960_dai;
> +
> +	imx_wm8960_dai[0].codec_of_node	= codec_np;
> +	imx_wm8960_dai[0].cpu_dai_name = dev_name(&cpu_pdev->dev);
> +	imx_wm8960_dai[0].platform_of_node = cpu_np;
> +
> +	if (!asrc_pdev) {
> +		data->card.num_links = 1;
> +	} else {
> +		imx_wm8960_dai[1].cpu_of_node = asrc_np;
> +		imx_wm8960_dai[1].platform_of_node = asrc_np;
> +		imx_wm8960_dai[2].codec_of_node	= codec_np;
> +		imx_wm8960_dai[2].cpu_dai_name = dev_name(&cpu_pdev->dev);
> +		data->card.num_links = 3;
> +
> +		ret = of_property_read_u32(asrc_np, "fsl,asrc-rate",
> +				&data->asrc_rate);
> +		if (ret) {
> +			dev_err(&pdev->dev, "failed to get output rate\n");
> +			ret = -EINVAL;
> +			goto fail;
> +		}
> +
> +		ret = of_property_read_u32(asrc_np, "fsl,asrc-width", &width);
> +		if (ret) {
> +			dev_err(&pdev->dev, "failed to get output rate\n");
> +			ret = -EINVAL;
> +			goto fail;
> +		}
> +
> +		if (width == 24)
> +			data->asrc_format = SNDRV_PCM_FORMAT_S24_LE;
> +		else
> +			data->asrc_format = SNDRV_PCM_FORMAT_S16_LE;
> +	}
> +
> +	data->card.dev = &pdev->dev;
> +	ret = snd_soc_of_parse_card_name(&data->card, "model");
> +	if (ret)
> +		goto fail;
> +	data->card.dapm_widgets = imx_wm8960_dapm_widgets;
> +	data->card.num_dapm_widgets = ARRAY_SIZE(imx_wm8960_dapm_widgets);
> +
> +	ret = snd_soc_of_parse_audio_routing(&data->card, "audio-routing");
> +	if (ret)
> +		goto fail;
> +
> +	data->card.late_probe = imx_wm8960_late_probe;
> +
> +	platform_set_drvdata(pdev, &data->card);
> +	snd_soc_card_set_drvdata(&data->card, data);
> +	ret = devm_snd_soc_register_card(&pdev->dev, &data->card);
> +	if (ret) {
> +		dev_err(&pdev->dev, "failed to register card (%d)\n", ret);
> +		goto fail;
> +	}
> +
> +	priv->snd_card = data->card.snd_card;
> +
> +	priv->hp_set_gpio = of_get_named_gpio_flags(pdev->dev.of_node,
> +			"hp-det-gpios", 0,
> +			(enum of_gpio_flags *)&priv->hp_active_low);
> +	if (IS_ERR(ERR_PTR(priv->hp_set_gpio)))
> +		goto fail;
> +
> +	priv->headset_kctl = snd_kctl_jack_new("Headset", priv->snd_card);
> +	ret = snd_ctl_add(data->card.snd_card, priv->headset_kctl);
> +	if (ret)
> +		goto fail;
> +
> +	ret = imx_wm8960_gpio_init(&data->card);
> +
> +	if (gpio_is_valid(priv->hp_set_gpio)) {
> +		ret = driver_create_file(pdev->dev.driver,
> +				&driver_attr_headphone);
> +		if (ret) {
> +			dev_err(&pdev->dev,
> +				"create hp attr failed (%d)\n", ret);
> +			goto fail;
> +		}
> +		ret = driver_create_file(pdev->dev.driver,
> +				&driver_attr_micphone);
> +		if (ret) {
> +			dev_err(&pdev->dev,
> +				"create mic attr failed (%d)\n", ret);
> +			goto fail;
> +		}
> +	}
> +fail:
> +	if (cpu_np)
> +		of_node_put(cpu_np);
> +	if (codec_np)
> +		of_node_put(codec_np);
> +
> +	return ret;
> +}
> +
> +static const struct of_device_id imx_wm8960_dt_ids[] = {
> +	{ .compatible = "fsl,imx-audio-wm8960", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, imx_wm8960_dt_ids);
> +
> +static struct platform_driver imx_wm8960_driver = {
> +	.driver = {
> +		.name = "imx-wm8960",
> +		.owner = THIS_MODULE,
> +		.pm = &snd_soc_pm_ops,
> +		.of_match_table = imx_wm8960_dt_ids,
> +	},
> +	.probe = imx_wm8960_probe,
> +};
> +module_platform_driver(imx_wm8960_driver);
> +
> +MODULE_AUTHOR("Freescale Semiconductor, Inc.");
> +MODULE_DESCRIPTION("Freescale i.MX WM8960 ASoC machine driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:imx-wm8960");
> -- 
> 1.9.1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists