| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1434447763-14752-1-git-send-email-habdul@visteon.com>
Date: Tue, 16 Jun 2015 09:44:06 +0000
From: "Abdul, Hussain (H.)" <habdul@...teon.com>
To: "gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>
CC: "devel@...verdev.osuosl.org" <devel@...verdev.osuosl.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"Ravindran, Madhusudhanan (M.)" <mravindr@...teon.com>,
"Dighe, Niranjan (N.)" <ndighe@...teon.com>,
"johnny.kim@...el.com" <johnny.kim@...el.com>,
"rachel.kim@...el.com" <rachel.kim@...el.com>,
"dean.lee@...el.com" <dean.lee@...el.com>,
"chris.park@...el.com" <chris.park@...el.com>,
"linux-wireless@...r.kernel.org" <linux-wireless@...r.kernel.org>
Subject: [PATCH v2] Staging: wilc1000: Boolean tests don't need comparisons
From: Abdul Hussain <habdul@...teon.com>
This patch removes unwanted true and false from boolean tests.
Signed-off-by: Abdul Hussain <habdul@...teon.com>
---
drivers/staging/wilc1000/coreconfigurator.c | 8 ++++----
drivers/staging/wilc1000/linux_mon.c | 2 +-
drivers/staging/wilc1000/linux_wlan.c | 2 +-
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 4 ++--
drivers/staging/wilc1000/wilc_wlan.c | 4 ++--
5 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/staging/wilc1000/coreconfigurator.c b/drivers/staging/wilc1000/coreconfigurator.c
index 9abc73d..616cf6d 100644
--- a/drivers/staging/wilc1000/coreconfigurator.c
+++ b/drivers/staging/wilc1000/coreconfigurator.c
@@ -1717,7 +1717,7 @@ s32 ParseResponse(u8 *resp, tstrWID *pstrWIDcfgResult)
idx++;
}
idx += 3;
- if ((u16WIDid == g_wid_num) && (num_wid_processed == false)) {
+ if ((u16WIDid == g_wid_num) && (!num_wid_processed)) {
num_wid_processed = true;
if (-2 == further_process_response(&resp[idx], u16WIDid, cfg_len, true, 0, &pstrWIDcfgResult[ResCnt])) {
@@ -1923,7 +1923,7 @@ s32 ConfigWaitResponse(WILC_Char *pcRespBuffer, s32 s32MaxRespBuffLen, s32 *ps32
* gstrConfigPktInfo.bRespRequired = bRespRequired;*/
- if (gstrConfigPktInfo.bRespRequired == true) {
+ if (gstrConfigPktInfo.bRespRequired) {
down(&SemHandlePktResp);
*ps32BytesRead = gstrConfigPktInfo.s32BytesRead;
@@ -1984,7 +1984,7 @@ s32 SendConfigPkt(u8 u8Mode, tstrWID *pstrWIDs,
ConfigWaitResponse(gps8ConfigPacket, MAX_PACKET_BUFF_SIZE, &s32RcvdRespLen, bRespRequired);
- if (bRespRequired == true) {
+ if (bRespRequired) {
/* If the operating Mode is GET, then we expect a response frame from */
/* the driver. Hence start listening to the port for response */
if (g_oper_mode == GET_CFG) {
@@ -2021,7 +2021,7 @@ s32 ConfigProvideResponse(WILC_Char *pcRespBuffer, s32 s32RespLen)
{
s32 s32Error = WILC_SUCCESS;
- if (gstrConfigPktInfo.bRespRequired == true) {
+ if (gstrConfigPktInfo.bRespRequired) {
if (s32RespLen <= gstrConfigPktInfo.s32MaxRespBuffLen) {
WILC_memcpy(gstrConfigPktInfo.pcRespBuffer, pcRespBuffer, s32RespLen);
gstrConfigPktInfo.s32BytesRead = s32RespLen;
diff --git a/drivers/staging/wilc1000/linux_mon.c b/drivers/staging/wilc1000/linux_mon.c
index 8cba13c..30d1c76 100644
--- a/drivers/staging/wilc1000/linux_mon.c
+++ b/drivers/staging/wilc1000/linux_mon.c
@@ -452,7 +452,7 @@ void WILC_mgm_HOSTAPD_ACK(void *priv, bool bStatus)
cb_hdr->rate = 5; /* txrate->bitrate / 5; */
- if (true == bStatus) {
+ if (bStatus) {
/* success */
cb_hdr->tx_flags = IEEE80211_RADIOTAP_F_TX_RTS;
} else {
diff --git a/drivers/staging/wilc1000/linux_wlan.c b/drivers/staging/wilc1000/linux_wlan.c
index c1e9272..c1cf5be 100644
--- a/drivers/staging/wilc1000/linux_wlan.c
+++ b/drivers/staging/wilc1000/linux_wlan.c
@@ -309,7 +309,7 @@ static int dev_state_ev_handler(struct notifier_block *this, unsigned long event
- if (bEnablePS == true)
+ if (bEnablePS)
host_int_set_power_mgmt((WILC_WFIDrvHandle)pstrWFIDrv, 1, 0);
PRINT_D(GENERIC_DBG, "[%s] Up IP\n", dev_iface->ifa_label);
diff --git a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
index 9861476..db0b782 100644
--- a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
+++ b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
@@ -624,7 +624,7 @@ static void CfgConnectResult(tenuConnDisconnEvent enuConnDisconnEvent,
}
}
- if (bNeedScanRefresh == true) {
+ if (bNeedScanRefresh) {
/*BugID_5418*/
/*Also, refrsh DIRECT- results if */
refresh_scan(priv, 1, true);
@@ -2817,7 +2817,7 @@ int WILC_WFI_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev,
return -EIO;
}
- if (bEnablePS == true)
+ if (bEnablePS)
host_int_set_power_mgmt(priv->hWILCWFIDrv, enabled, timeout);
diff --git a/drivers/staging/wilc1000/wilc_wlan.c b/drivers/staging/wilc1000/wilc_wlan.c
index 762470c..db9e717 100644
--- a/drivers/staging/wilc1000/wilc_wlan.c
+++ b/drivers/staging/wilc1000/wilc_wlan.c
@@ -559,7 +559,7 @@ static int wilc_wlan_txq_add_net_pkt(void *priv, uint8_t *buffer, uint32_t buffe
#ifdef TCP_ACK_FILTER
tqe->tcp_PendingAck_index = NOT_TCP_ACK;
#ifdef TCP_ENHANCEMENTS
- if (is_TCP_ACK_Filter_Enabled() == true)
+ if (is_TCP_ACK_Filter_Enabled())
#endif
tcp_process(tqe);
#endif
@@ -2337,7 +2337,7 @@ u16 Set_machw_change_vir_if(bool bValue)
PRINT_ER("Error while Reading reg WILC_CHANGING_VIR_IF\n");
}
- if (bValue == true) {
+ if (bValue) {
reg |= (BIT31);
} else {
reg &= ~(BIT31);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists