| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1435738922-12580-3-git-send-email-martink@posteo.de>
Date: Wed, 1 Jul 2015 10:21:56 +0200
From: Martin Kepplinger <martink@...teo.de>
To: pmeerw@...erw.net, jic23@...nel.org,
christoph.muellner@...obroma-systems.com
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-iio@...r.kernel.org, Martin Kepplinger <martink@...teo.de>,
Martin Kepplinger <martin.kepplinger@...obroma-systems.com>
Subject: [PATCH 2/8] iio: mma8452: add support for MMA8453Q accelerometer chip
This adds support for the 10 bit version if Freescale's accelerometers
of this series. The datasheet is available at Freescale's website:
http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8453Q.pdf
Signed-off-by: Martin Kepplinger <martin.kepplinger@...obroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@...obroma-systems.com>
---
drivers/iio/accel/Kconfig | 6 +++---
drivers/iio/accel/mma8452.c | 41 ++++++++++++++++++++++++++++++++++++++---
2 files changed, 41 insertions(+), 6 deletions(-)
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 00e7bcb..91fab16 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -87,13 +87,13 @@ config KXSD9
will be called kxsd9.
config MMA8452
- tristate "Freescale MMA8452Q Accelerometer Driver"
+ tristate "Freescale MMA8452 Accelerometer Driver"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
- Say yes here to build support for the Freescale MMA8452Q 3-axis
- accelerometer.
+ Say yes here to build support for the following Freescale 3-axis
+ accelerometers: MMA8452Q, MMA8453Q.
To compile this driver as a module, choose M here: the module
will be called mma8452.
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index b2ebfcb..209b0d7 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -1,5 +1,8 @@
/*
- * mma8452.c - Support for Freescale MMA8452Q 3-axis 12-bit accelerometer
+ * mma8452.c - Support for following Freescale 3-axis accelerometers:
+ *
+ * MMA8452Q
+ * MMA8453Q
*
* Copyright 2014 Peter Meerwald <pmeerw@...erw.net>
*
@@ -27,7 +30,7 @@
#define DRIVER_NAME "mma8452"
#define MMA8452_STATUS 0x00
-#define MMA8452_OUT_X 0x01 /* MSB first, 12-bit */
+#define MMA8452_OUT_X 0x01 /* MSB first, 10 or 12-bit */
#define MMA8452_OUT_Y 0x03
#define MMA8452_OUT_Z 0x05
#define MMA8452_INT_SRC 0x0c
@@ -74,6 +77,7 @@
#define MMA8452_INT_TRANS BIT(5)
#define MMA8452_DEVICE_ID 0x2a
+#define MMA8453_DEVICE_ID 0x3a
struct mma8452_data {
struct i2c_client *client;
@@ -718,8 +722,16 @@ static const struct iio_chan_spec mma8452_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(3),
};
+static const struct iio_chan_spec mma8453_channels[] = {
+ MMA8452_CHANNEL(X, 0, 10),
+ MMA8452_CHANNEL(Y, 1, 10),
+ MMA8452_CHANNEL(Z, 2, 10),
+ IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
enum {
mma8452,
+ mma8453,
};
/*
@@ -747,7 +759,24 @@ static const struct mma_chip_info mma_chip_info_table[] = {
.ev_ths_mask = MMA8452_TRANSIENT_THS_MASK,
.ev_count = MMA8452_TRANSIENT_COUNT,
},
+ [mma8453] = {
+ .chip_id = MMA8453_DEVICE_ID,
+ .channels = mma8453_channels,
+ .num_channels = ARRAY_SIZE(mma8453_channels),
+ .mma_scales = { {0, 38307}, {0, 76614}, {0, 153228} },
+ .ev_cfg = MMA8452_TRANSIENT_CFG,
+ .ev_cfg_ele = MMA8452_TRANSIENT_CFG_ELE,
+ .ev_cfg_chan_shift = 1,
+ .ev_src = MMA8452_TRANSIENT_SRC,
+ .ev_src_xe = MMA8452_TRANSIENT_SRC_XTRANSE,
+ .ev_src_ye = MMA8452_TRANSIENT_SRC_YTRANSE,
+ .ev_src_ze = MMA8452_TRANSIENT_SRC_ZTRANSE,
+ .ev_ths = MMA8452_TRANSIENT_THS,
+ .ev_ths_mask = MMA8452_TRANSIENT_THS_MASK,
+ .ev_count = MMA8452_TRANSIENT_COUNT,
+ },
};
+
static struct attribute *mma8452_attributes[] = {
&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
&iio_dev_attr_in_accel_scale_available.dev_attr.attr,
@@ -866,6 +895,7 @@ static int mma8452_reset(struct i2c_client *client)
static const struct of_device_id mma8452_dt_ids[] = {
{ .compatible = "fsl,mma8452", .data = &mma_chip_info_table[mma8452] },
+ { .compatible = "fsl,mma8453", .data = &mma_chip_info_table[mma8453] },
{ }
};
@@ -880,7 +910,8 @@ static int mma8452_probe(struct i2c_client *client,
ret = i2c_smbus_read_byte_data(client, MMA8452_WHO_AM_I);
if (ret < 0)
return ret;
- if (ret != MMA8452_DEVICE_ID)
+
+ if (ret != MMA8452_DEVICE_ID && ret != MMA8453_DEVICE_ID)
return -ENODEV;
match = of_match_device(mma8452_dt_ids, &client->dev);
@@ -898,6 +929,9 @@ static int mma8452_probe(struct i2c_client *client,
data->chip_info = match->data;
mutex_init(&data->lock);
+ dev_info(&client->dev, "registering %s accelerometer; ID 0x%x\n",
+ match->compatible, data->chip_info->chip_id);
+
i2c_set_clientdata(client, indio_dev);
indio_dev->info = &mma8452_info;
indio_dev->name = DRIVER_NAME;
@@ -1024,6 +1058,7 @@ static SIMPLE_DEV_PM_OPS(mma8452_pm_ops, mma8452_suspend, mma8452_resume);
static const struct i2c_device_id mma8452_id[] = {
{ "mma8452", mma8452 },
+ { "mma8453", mma8453 },
{ }
};
MODULE_DEVICE_TABLE(i2c, mma8452_id);
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists