[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1435738922-12580-4-git-send-email-martink@posteo.de>
Date: Wed, 1 Jul 2015 10:21:57 +0200
From: Martin Kepplinger <martink@...teo.de>
To: pmeerw@...erw.net, jic23@...nel.org,
christoph.muellner@...obroma-systems.com
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-iio@...r.kernel.org, Martin Kepplinger <martink@...teo.de>,
Martin Kepplinger <martin.kepplinger@...obroma-systems.com>
Subject: [PATCH 3/8] iio: mma8452: add freefall / motion interrupt source
This adds the freefall / motion interrupt source definitions to the driver.
It is not in use now, but mma_chip_info and iio_chan_spec can easily be
adapted to use it instead of the transient interrupt source.
Signed-off-by: Martin Kepplinger <martin.kepplinger@...obroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@...obroma-systems.com>
---
drivers/iio/accel/mma8452.c | 45 ++++++++++++++++++++++++++++++++++++---------
1 file changed, 36 insertions(+), 9 deletions(-)
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 209b0d7..0498b6e 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -38,9 +38,18 @@
#define MMA8452_DATA_CFG 0x0e
#define MMA8452_HP_FILTER_CUTOFF 0x0f
#define MMA8452_HP_FILTER_CUTOFF_SEL_MASK (BIT(0) | BIT(1))
+#define MMA8452_FF_MT_CFG 0x15
+#define MMA8452_FF_MT_CFG_OAE BIT(6)
+#define MMA8452_FF_MT_CFG_ELE BIT(7)
+#define MMA8452_FF_MT_SRC 0x16
+#define MMA8452_FF_MT_SRC_XHE BIT(1)
+#define MMA8452_FF_MT_SRC_YHE BIT(3)
+#define MMA8452_FF_MT_SRC_ZHE BIT(5)
+#define MMA8452_FF_MT_THS 0x17
+#define MMA8452_FF_MT_THS_MASK 0x7f
+#define MMA8452_FF_MT_COUNT 0x18
#define MMA8452_TRANSIENT_CFG 0x1d
#define MMA8452_TRANSIENT_CFG_ELE BIT(4)
-#define MMA8452_TRANSIENT_CFG_CHAN(chan) BIT(chan + 1)
#define MMA8452_TRANSIENT_CFG_HPF_BYP BIT(0)
#define MMA8452_TRANSIENT_SRC 0x1e
#define MMA8452_TRANSIENT_SRC_XTRANSE BIT(1)
@@ -74,6 +83,7 @@
#define MMA8452_DATA_CFG_HPF_MASK BIT(4)
#define MMA8452_INT_DRDY BIT(0)
+#define MMA8452_INT_FF_MT BIT(2)
#define MMA8452_INT_TRANS BIT(5)
#define MMA8452_DEVICE_ID 0x2a
@@ -564,7 +574,8 @@ static int mma8452_write_event_config(struct iio_dev *indio_dev,
else
val &= ~BIT(chan->scan_index + chip->ev_cfg_chan_shift);
- val |= MMA8452_TRANSIENT_CFG_ELE;
+ val |= chip->ev_cfg_ele;
+ val |= MMA8452_FF_MT_CFG_OAE;
return mma8452_change_config(data, chip->ev_cfg, val);
}
@@ -605,6 +616,7 @@ static irqreturn_t mma8452_interrupt(int irq, void *p)
{
struct iio_dev *indio_dev = p;
struct mma8452_data *data = iio_priv(indio_dev);
+ const struct mma_chip_info *chip = data->chip_info;
int ret = IRQ_NONE;
int src;
@@ -617,7 +629,10 @@ static irqreturn_t mma8452_interrupt(int irq, void *p)
ret = IRQ_HANDLED;
}
- if (src & MMA8452_INT_TRANS) {
+ if ((src & MMA8452_INT_TRANS &&
+ chip->ev_src == MMA8452_TRANSIENT_SRC) ||
+ (src & MMA8452_INT_FF_MT &&
+ chip->ev_src == MMA8452_FF_MT_SRC)) {
mma8452_transient_interrupt(indio_dev);
ret = IRQ_HANDLED;
}
@@ -678,6 +693,16 @@ static const struct iio_event_spec mma8452_transient_event[] = {
},
};
+static const struct iio_event_spec mma8452_motion_event[] = {
+ {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_RISING,
+ .mask_separate = BIT(IIO_EV_INFO_ENABLE),
+ .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_PERIOD)
+ },
+};
+
/*
* Threshold is configured in fixed 8G/127 steps regardless of
* currently selected scale for measurement.
@@ -962,13 +987,15 @@ static int mma8452_probe(struct i2c_client *client,
if (client->irq) {
/*
- * Although we enable the transient interrupt source once and
- * for all here the transient event detection itself is not
- * enabled until userspace asks for it by
- * mma8452_write_event_config()
+ * Although we enable the interrupt sources once and for
+ * all here the event detection itself is not enabled until
+ * userspace asks for it by mma8452_write_event_config()
*/
- int supported_interrupts = MMA8452_INT_DRDY | MMA8452_INT_TRANS;
- int enabled_interrupts = MMA8452_INT_TRANS;
+ int supported_interrupts = MMA8452_INT_DRDY |
+ MMA8452_INT_TRANS |
+ MMA8452_INT_FF_MT;
+ int enabled_interrupts = MMA8452_INT_TRANS |
+ MMA8452_INT_FF_MT;
/* Assume wired to INT1 pin */
ret = i2c_smbus_write_byte_data(client,
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists