[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1436409944.4915.6.camel@mtksdaap41>
Date: Thu, 9 Jul 2015 10:45:44 +0800
From: YH Huang <yh.huang@...iatek.com>
To: Daniel Kurtz <djkurtz@...omium.org>
CC: Matthias Brugger <matthias.bgg@...il.com>,
Mark Rutland <mark.rutland@....com>,
Thierry Reding <thierry.reding@...il.com>,
"Rob Herring" <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>, <linux-pwm@...r.kernel.org>,
"open list:OPEN FIRMWARE AND..." <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
srv_heupstream <srv_heupstream@...iatek.com>,
<linux-mediatek@...ts.infradead.org>,
"Sascha Hauer" <kernel@...gutronix.de>,
Yingjoe Chen <yingjoe.chen@...iatek.com>,
<yh.huang@...iatek.com>
Subject: Re: [PATCH v4 1/3] dt-bindings: pwm: add MediaTek display PWM
bindings
On Wed, 2015-07-08 at 20:11 +0800, Daniel Kurtz wrote:
> On Mon, Jul 6, 2015 at 9:29 PM, YH Huang <yh.huang@...iatek.com> wrote:
> > Document the device-tree binding of MediatTek display PWM.
> > The PWM has one channel to control the backlight brightness for display.
> > It supports MT8173 and MT6595.
> >
> > Signed-off-by: YH Huang <yh.huang@...iatek.com>
> > ---
> > .../devicetree/bindings/pwm/pwm-mtk-disp.txt | 24 ++++++++++++++++++++++
> > 1 file changed, 24 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt
> >
> > diff --git a/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt b/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt
> > new file mode 100644
> > index 0000000..757b974
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt
> > @@ -0,0 +1,24 @@
> > +MediaTek display PWM controller
> > +
> > +Required properties:
> > + - compatible: should be "mediatek,<name>-disp-pwm"
> > + - "mediatek,mt8173-disp-pwm": found on mt8173 SoC
> > + - "mediatek,mt6595-disp-pwm": found on mt6595 SoC
> > + - reg: physical base address and length of the controller's registers
> > + - #pwm-cells: must be 2. See pwm.txt in this directory for a description of
> > + the cell format
> > + - clocks: phandle and clock specifier of the PWM reference clock
> > + - clock-names: must contain the following
> > + - "main": clock used to generate PWM signals
> > + - "mm": sync signals from the modules of mmsys
> > +
> > +Example:
> > + pwm0: pwm@...1e000 {
> > + compatible = "mediatek,mt8173-disp-pwm",
> > + "mediatek,mt6595-disp-pwm";
> > + reg = <0 0x1401e000 0 0x1000>;
> > + #pwm-cells = <2>;
> > + clocks = <&mmsys CLK_MM_DISP_PWM026M>,
> > + <&mmsys CLK_MM_DISP_PWM0MM>;
> > + clock-names = "main", "mm";
>
> Should we include the pinctrl settings here to enable the PWM output?
>
Since we use pwm-backlight driver to control backlight, we should enable
PWM output in the backlight node.
Ref:
https://www.kernel.org/doc/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
Regards,
YH Huang
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists