[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <55AF89BE.3000208@ti.com>
Date: Wed, 22 Jul 2015 17:47:02 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: Ulf Hansson <ulf.hansson@...aro.org>,
"Franklin S Cooper Jr." <fcooper@...com>
CC: linux-omap <linux-omap@...r.kernel.org>,
linux-mmc <linux-mmc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Roger Quadros <rogerq@...com>,
Lokesh Vutla <lokeshvutla@...com>,
Murali Karicheri <m-karicheri2@...com>
Subject: Re: [PATCH] mmc: omap_hsmmc: Update driver to support without regulators
Hi,
On Wednesday 22 July 2015 05:37 PM, Ulf Hansson wrote:
> [...]
>
>> Hi Ulf,
>>
>> Just to clarify do you have an issue with this patch or in general
>> you rather nothave !CONFIG_REGULATOR supported? If its the latter
>> then wouldit be better to remove the !CONFIG_REGULATOR portion from
>> this driver all together.
>
> I don't like this patch as is, as it seems like you are replacing the
> VMMC regulator that actually exist in HW by parsing a DT property.
>
> I think mmc_of_parse_voltage() shall *only* be used when the OCR mask
> (->ocr_avail) can't be fetched by using a regulator. Typically that's
> when the VMMC voltage levels are managed within the mmc controller
> itself.
>
> I don't have a strong opinion on how you solve that, but I guess you
> have two options.
>
> 1.
> Make sure the driver can be build and used both for CONFIG_REGULATOR
> and !CONFIG_REGULATOR. What you need to take care of then, is to
> assign the ->ocr_avail mask to a default value in the case when it
> can't be fetched from a regulator. Most mmc drivers has some kind of
> fall-back mechanism like this.
I'm working on cleaning up omap_hsmmc driver where I have taken care to avoid
dependency with CONFIG_REGULATOR. I'll post the series asap.
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists