linux-kernel - Re: [linux-sunxi] [RFC] ARM: dts: sunxi: Add regulators and board-specific operating points for LeMaker BananaPi

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-Id: <20150728150123.1AAA46C86538@dd34104.kasserver.com>
Date:	Tue, 28 Jul 2015 17:01:23 +0200 (CEST)
From:	"Timo Sigurdsson" <public_timo.s@...entcreek.de>
To:	maxime.ripard@...e-electrons.com
Cc:	hdegoede@...hat.com, wens@...e.org, galak@...eaurora.org,
	linux-kernel@...r.kernel.org, mark.rutland@....com,
	devicetree@...r.kernel.org, ijc+devicetree@...lion.org.uk,
	linux-arm-kernel@...ts.infradead.org, linux-sunxi@...glegroups.com,
	pawel.moll@....com, linux@....linux.org.uk, robh+dt@...nel.org
Subject: Re: [linux-sunxi] [RFC] ARM: dts: sunxi: Add regulators and board-specific operating points for LeMaker BananaPi

Hi,

Maxime Ripard schrieb am 28.07.2015 14:55:
>> IMHO for a common maximum opp that's a good approach. But for the lowest
>> frequency setting, it would seem more logical to me, to raise the voltage
>> to a point where all boards will run fine with them, unless those boards 
>> cannot handle the frequency regardless of the higher voltage.
> 
> Agreed.

Ok, then I will write another patch for this as well, unless Chen-Yu or
someone else objects.

Regards,

Timo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/