| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <55BA2F26.2030003@samsung.com>
Date: Thu, 30 Jul 2015 16:05:26 +0200
From: Robert Baldyga <r.baldyga@...sung.com>
To: Paul Bolle <pebolle@...cali.nl>
Cc: lauro.venancio@...nbossa.org, aloisio.almeida@...nbossa.org,
sameo@...ux.intel.com, robh+dt@...nel.org, pawel.moll@....com,
mark.rutland@....com, ijc+devicetree@...lion.org.uk,
galak@...eaurora.org, linux-wireless@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-nfc@...ts.01.org, m.szyprowski@...sung.com
Subject: Re: [PATCH] nfc: s3fwrn5: Add driver for Samsung S3FWRN5 NFC Chip
On 07/30/2015 12:22 PM, Paul Bolle wrote:
> On wo, 2015-07-29 at 14:15 +0200, Robert Baldyga wrote:
>> --- /dev/null
>> +++ b/drivers/nfc/s3fwrn5/Kconfig
>> @@ -0,0 +1,22 @@
>> +config NFC_S3FWRN5
>> + tristate "Samsung S3FWRN5 NFC driver"
>> + depends on NFC_NCI
>> + default n
>> + ---help---
>> + Core driver for Samsung S3FWRN5 NFC chip.
>> +
>> + To compile this driver as a module, choose m here. The module will
>> + be called s3fwrn5.ko.
>> + Say N if unsure.
>
> If I scanned the code correctly then all this module does is exporting
> three functions to s3fwrn5_i2c.ko. Note that there's also no
> module_unit() in sight. So it's a library, of sorts. And there's no
> reason to load this module without also loading s3fwrn5_i2c.ko. Likewise
> there's no reason to build it without also building s3fwrn5_i2c.ko.
>
> So perhaps you could merge the two Kconfig symbols you add in this
> patch.
>
> Or, if you'd like to keep both Kconfig symbols, for whatever reason, you
> might want to make NFC_S3FWRN5 a "silent" symbol that will be selected
> by NFC_S3FWRN5_I2C. (That probably requires NFC_S3FWRN5_I2C to depend on
> both NFC_NCI and I2C.)
>
> Would either of the above two options work here?
I would like to keep NFC_S3FWRN5 symbol, because in future another PHYs
can be supported, so this would allow to select core whether PHY will be
selected. However "silent" symbol seems to be a good solution.
>
>> +config NFC_S3FWRN5_I2C
>> + tristate "Samsung S3FWRN5 I2C support"
>> + depends on NFC_S3FWRN5 && I2C
>> + default y
>
> You only added "default y" to make setting this symbol in "make *config"
> a one step process, right?
Thats right. Moreover for now i2c is the only available PHY, so if
someone decides to select S3FWRN5 core driver he also probably wants to
have the PHY selected ;)
>> + ---help---
>> + This module adds support for an I2C interface to the S3FWRN5 chip.
>> + Select this if your platform is using the I2C bus.
>> +
>> + To compile this driver as a module, choose m here. The module will
>> + be called s3fwrn5_i2c.ko.
>> + Say N if unsure.
>
> (This advice is at odds with "default y" above, by the way.)
>
>> --- /dev/null
>> +++ b/drivers/nfc/s3fwrn5/Makefile
>
>> +s3fwrn5-objs = core.o firmware.o nci.o
>> +s3fwrn5_i2c-objs = i2c.o
>> +
>> +obj-$(CONFIG_NFC_S3FWRN5) += s3fwrn5.o
>> +obj-$(CONFIG_NFC_S3FWRN5_I2C) += s3fwrn5_i2c.o
>
>> --- /dev/null
>> +++ b/drivers/nfc/s3fwrn5/core.c
>
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms and conditions of the GNU General Public License,
>> + * version 2, as published by the Free Software Foundation.
>
>> +int s3fwrn5_probe(struct nci_dev **ndev, void *phy_id, struct device *pdev,
>> + struct s3fwrn5_phy_ops *phy_ops, unsigned int max_payload)
>> +{
>> + [...]
>> +}
>> +EXPORT_SYMBOL(s3fwrn5_probe);
>> +
>> +void s3fwrn5_remove(struct nci_dev *ndev)
>> +{
>> + [...]
>> +}
>> +EXPORT_SYMBOL(s3fwrn5_remove);
>> +
>> +int s3fwrn5_recv_frame(struct nci_dev *ndev, struct sk_buff *skb,
>> + enum s3fwrn5_mode mode)
>> +{
>> + [...]
>> +}
>> +EXPORT_SYMBOL(s3fwrn5_recv_frame);
>
>> +MODULE_LICENSE("GPL");
>
>> --- /dev/null
>> +++ b/drivers/nfc/s3fwrn5/i2c.c
>
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms and conditions of the GNU General Public License,
>> + * version 2, as published by the Free Software Foundation.
>
>> +static int s3fwrn5_i2c_fw_read(struct s3fwrn5_i2c_phy *phy)
>> +{
>> + [...]
>> +
>> + return s3fwrn5_recv_frame(phy->ndev, skb, S3FWRN5_MODE_FW);
>> +}
>> +
>> +static int s3fwrn5_i2c_nci_read(struct s3fwrn5_i2c_phy *phy)
>> +{
>> + [...]
>> +
>> + return s3fwrn5_recv_frame(phy->ndev, skb, S3FWRN5_MODE_NCI);
>> +}
>
>> +static int s3fwrn5_i2c_probe(struct i2c_client *client,
>> + const struct i2c_device_id *id)
>> +{
>> + [...]
>> +
>> + ret = s3fwrn5_probe(&phy->ndev, phy, &phy->i2c_dev->dev, &i2c_phy_ops,
>> + S3FWRN5_I2C_MAX_PAYLOAD);
>> + [...]
>> + s3fwrn5_remove(phy->ndev);
>> +
>> + [...]
>> +}
>> +
>> +static int s3fwrn5_i2c_remove(struct i2c_client *client)
>> +{
>> + [...]
>> +
>> + s3fwrn5_remove(phy->ndev);
>> +
>> + [...]
>> +}
>
>> +MODULE_LICENSE("GPL");
>
> Nit: both modules' code contain a comment referring to the "GNU General
> Public License, version 2". They also both use the "GPL" ident in their
> MODULE_LICENSE() macro. And, according to include/linux/module.h, that
> ident states the license is GPL v2 or later. So I think either the
> comments or the idents need to change.
>
Will be fixed.
Thanks,
Robert Baldyga
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists