linux-kernel - Re: [PATCH v1] usb: dwc2: reset AHB hclk domain before init

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <55CB28A1.6090208@rock-chips.com>
Date:	Wed, 12 Aug 2015 19:06:09 +0800
From:	Yunzhi Li <lyz@...k-chips.com>
To:	balbi@...com
CC:	jwerner@...omium.org, dianders@...omium.org,
	huangtao@...k-chips.com, cf@...k-chips.com, hl@...k-chips.com,
	linux-rockchip@...ts.infradead.org,
	John Youn <johnyoun@...opsys.com>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v1] usb: dwc2: reset AHB hclk domain before init

Hi ,
在 2015/8/11 22:12, Felipe Balbi 写道:
> Hi,
>
> On Tue, Aug 11, 2015 at 10:27:42AM +0800, Yunzhi Li wrote:
>> We initiate dwc2 usb controller in BIOS, when kernel driver
>> start-up we should reset AHB hclk domain to reset all AHB
>> interface registers to default. Without this the FIFO value
>> setting might be incorrect because calculating FIFO size need the
>> power-on value of GRXFSIZ/GNPTXFSIZ/HPTXFSIZ registers.
>>
>> This patch could avoid warnning massage like in rk3288 platform:
>> [    2.074764] dwc2 ff580000.usb: 256 invalid for
>> host_perio_tx_fifo_size. Check HW configuration.
>>
>> Signed-off-by: Yunzhi Li <lyz@...k-chips.com>
>>
>> ---
>>
>>   drivers/usb/dwc2/platform.c | 12 ++++++++++++
>>   1 file changed, 12 insertions(+)
>>
>> diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
>> index 9093530..3da21ab 100644
>> --- a/drivers/usb/dwc2/platform.c
>> +++ b/drivers/usb/dwc2/platform.c
>> @@ -42,6 +42,7 @@
>>   #include <linux/of_device.h>
>>   #include <linux/mutex.h>
>>   #include <linux/platform_device.h>
>> +#include <linux/reset.h>
>>   
>>   #include <linux/usb/of.h>
>>   
>> @@ -165,6 +166,7 @@ static int dwc2_driver_probe(struct platform_device *dev)
>>   	struct resource *res;
>>   	struct phy *phy;
>>   	struct usb_phy *uphy;
>> +	struct reset_control *rst;
>>   	int retval;
>>   	int irq;
>>   
>> @@ -189,6 +191,16 @@ static int dwc2_driver_probe(struct platform_device *dev)
>>   
>>   	hsotg->dev = &dev->dev;
>>   
>> +	/* AHB hclk domain reset, set all AHB interface registers to default */
>> +	rst = devm_reset_control_get_optional(&dev->dev, "ahb_reset");
> why isn't this done in core so PCI systems can also make use of it ?
>
I have no ides about how to reset a PCI interface dwc2 controller, John 
could you please give some infomation about it ?
Is it also needed for PCI interface dwc2 IP ?

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/