Message-ID: <55D568E2.9060505@hisilicon.com>
Date:	Thu, 20 Aug 2015 13:42:58 +0800
From:	YiPing Xu <xuyiping@...ilicon.com>
To:	Leo Yan <leo.yan@...aro.org>, Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	<galak@...eaurora.org>, Catalin Marinas <catalin.marinas@....com>,
	Will Deacon <will.deacon@....com>,
	Jassi Brar <jassisinghbrar@...il.com>,
	Bintian Wang <bintian.wang@...wei.com>,
	<haojian.zhuang@...aro.org>, Wei Xu <xuwei5@...ilicon.com>,
	<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>, <guodong.xu@...aro.org>,
	Jian Zhang <zhangjian001@...ilicon.com>,
	Zhenwei Wang <Zhenwei.wang@...ilicon.com>,
	Haoju Mo <mohaoju@...ilicon.com>,
	Dan Zhao <dan.zhao@...ilicon.com>, <kongfei@...ilicon.com>,
	Guangyue Zeng <zengguangyue@...ilicon.com>
Subject: Re: [PATCH v2 2/3] mailbox: Hi6220: add mailbox driver

On 2015/8/20 10:53, Leo Yan wrote:
> Add driver for Hi6220 mailbox, the mailbox communicates with MCU; for
> sending data, it can support two methods for low level implementation:
> one is to use interrupt as acknowledge, another is automatic mode which
> without any acknowledge. These two methods have been supported in the
> driver. For receiving data, it will depend on the interrupt to notify
> the channel has incoming message; enhance rx channel's message queue,
> which is based on the code in drivers/mailbox/omap-mailbox.c.
>
> Now mailbox driver is used to send message to MCU to control dynamic
> voltage and frequency scaling for CPU, GPU and DDR.
>
> Signed-off-by: Leo Yan <leo.yan@...aro.org>
> ---
>   drivers/mailbox/Kconfig          |   8 +
>   drivers/mailbox/Makefile         |   2 +
>   drivers/mailbox/hi6220-mailbox.c | 519 +++++++++++++++++++++++++++++++++++++++
>   3 files changed, 529 insertions(+)
>   create mode 100644 drivers/mailbox/hi6220-mailbox.c
>
> diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
> index e269f08..21b71dd 100644
> --- a/drivers/mailbox/Kconfig
> +++ b/drivers/mailbox/Kconfig
> @@ -70,4 +70,12 @@ config BCM2835_MBOX
>   	  the services of the Videocore. Say Y here if you want to use the
>   	  BCM2835 Mailbox.
>
> +config HI6220_MBOX
> +	tristate "Hi6220 Mailbox"
> +	depends on ARCH_HISI
> +	help
> +	  An implementation of the hi6220 mailbox. It is used to send message
> +	  between application processors and MCU. Say Y here if you want to build
> +	  the Hi6220 mailbox controller driver.
> +
>   endif
> diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
> index 8e6d822..4ba9f5f 100644
> --- a/drivers/mailbox/Makefile
> +++ b/drivers/mailbox/Makefile
> @@ -13,3 +13,5 @@ obj-$(CONFIG_PCC)		+= pcc.o
>   obj-$(CONFIG_ALTERA_MBOX)	+= mailbox-altera.o
>
>   obj-$(CONFIG_BCM2835_MBOX)	+= bcm2835-mailbox.o
> +
> +obj-$(CONFIG_HI6220_MBOX)	+= hi6220-mailbox.o
> diff --git a/drivers/mailbox/hi6220-mailbox.c b/drivers/mailbox/hi6220-mailbox.c
> new file mode 100644
> index 0000000..8f63d0d
> --- /dev/null
> +++ b/drivers/mailbox/hi6220-mailbox.c
> @@ -0,0 +1,519 @@
> +/*
> + * Hisilicon's Hi6220 mailbox driver
> + *
> + * RX channel's message queue is based on the code written in
> + * drivers/mailbox/omap-mailbox.c.
> + *
> + * Copyright (c) 2015 Hisilicon Limited.
> + * Copyright (c) 2015 Linaro Limited.
> + *
> + * Author: Leo Yan <leo.yan@...aro.org>
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation, version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/kfifo.h>
> +#include <linux/mailbox_controller.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/spinlock.h>
> +#include <linux/slab.h>
> +
> +#define HI6220_MBOX_CHAN_MAX		32
> +#define HI6220_MBOX_CHAN_NUM		2
> +#define HI6220_MBOX_CHAN_SLOT_SIZE	64
> +
> +#define HI6220_MBOX_RX			0x0
> +#define HI6220_MBOX_TX			0x1
> +
> +/* Mailbox message length: 32 bytes */
> +#define HI6220_MBOX_MSG_LEN		32
> +
> +/* Mailbox kfifo size */
> +#define HI6220_MBOX_MSG_FIFO_SIZE	512
> +
> +/* Status & Mode Register */
> +#define HI6220_MBOX_MODE_REG		0x0
> +
> +#define HI6220_MBOX_STATUS_MASK		(0xF << 4)
> +#define HI6220_MBOX_STATUS_IDLE		(0x1 << 4)
> +#define HI6220_MBOX_STATUS_TX		(0x2 << 4)
> +#define HI6220_MBOX_STATUS_RX		(0x4 << 4)
> +#define HI6220_MBOX_STATUS_ACK		(0x8 << 4)
> +#define HI6220_MBOX_ACK_CONFIG_MASK	(0x1 << 0)
> +#define HI6220_MBOX_ACK_AUTOMATIC	(0x1 << 0)
> +#define HI6220_MBOX_ACK_IRQ		(0x0 << 0)
> +
> +/* Data Registers */
> +#define HI6220_MBOX_DATA_REG(i)		(0x4 + (i << 2))
> +
> +/* ACPU Interrupt Register */
> +#define HI6220_MBOX_ACPU_INT_RAW_REG	0x400
> +#define HI6220_MBOX_ACPU_INT_MSK_REG	0x404
> +#define HI6220_MBOX_ACPU_INT_STAT_REG	0x408
> +#define HI6220_MBOX_ACPU_INT_CLR_REG	0x40c
> +#define HI6220_MBOX_ACPU_INT_ENA_REG	0x500
> +#define HI6220_MBOX_ACPU_INT_DIS_REG	0x504
> +
> +/* MCU Interrupt Register */
> +#define HI6220_MBOX_MCU_INT_RAW_REG	0x420
> +
> +/* Core Id */
> +#define HI6220_CORE_ACPU		0x0
> +#define HI6220_CORE_MCU			0x2
> +
> +struct hi6220_mbox_queue {
> +	struct kfifo fifo;
> +	struct work_struct work;
> +	struct mbox_chan *chan;
> +	bool full;
> +};
> +
> +struct hi6220_mbox_chan {
> +
> +	/*
> +	 * Description for channel's hardware info:
> +	 *  - direction;
> +	 *  - peer core id for communication;
> +	 *  - local irq vector or number;
> +	 *  - remoted irq vector or number for peer core;
> +	 */
> +	unsigned int dir;
> +	unsigned int peer_core;
> +	unsigned int remote_irq;
> +	unsigned int local_irq;
> +
> +	/*
> +	 * Slot address is cached value derived from index
> +	 * within buffer for every channel
> +	 */
> +	void __iomem *slot;
> +
> +	/* For rx's fifo operations */
> +	struct hi6220_mbox_queue *mq;
> +
> +	struct hi6220_mbox *parent;
> +};
> +
> +struct hi6220_mbox {
> +	struct device *dev;
> +
> +	spinlock_t lock;
> +
> +	int irq;
> +
> +	/* flag of enabling tx's irq mode */
> +	bool tx_irq_mode;
> +
> +	/* region for ipc event */
> +	void __iomem *ipc;
> +
> +	/* region for share mem */
> +	void __iomem *buf;
> +
> +	unsigned int chan_num;
> +	struct hi6220_mbox_chan *mchan;
> +
> +	void *irq_map_chan[HI6220_MBOX_CHAN_MAX];
> +	struct mbox_chan *chan;
> +	struct mbox_controller controller;
> +};
> +
> +static void hi6220_mbox_set_status(struct hi6220_mbox_chan *mchan, u32 val)
> +{
> +	u32 status;
> +
> +	status = readl(mchan->slot + HI6220_MBOX_MODE_REG);
> +	status &= ~HI6220_MBOX_STATUS_MASK;
> +	status |= val;
> +	writel(status, mchan->slot + HI6220_MBOX_MODE_REG);
> +}
> +
> +static void hi6220_mbox_set_mode(struct hi6220_mbox_chan *mchan, u32 val)
> +{
> +	u32 mode;
> +
> +	mode = readl(mchan->slot + HI6220_MBOX_MODE_REG);
> +	mode &= ~HI6220_MBOX_ACK_CONFIG_MASK;
> +	mode |= val;
> +	writel(mode, mchan->slot + HI6220_MBOX_MODE_REG);
> +}
> +
> +static bool hi6220_mbox_last_tx_done(struct mbox_chan *chan)
> +{
> +	struct hi6220_mbox_chan *mchan = chan->con_priv;
> +	struct hi6220_mbox *mbox = mchan->parent;
> +	u32 status;
> +
> +	/* Only set idle state for polling mode */
> +	BUG_ON(mbox->tx_irq_mode);
> +
> +	status = readl(mchan->slot + HI6220_MBOX_MODE_REG);
> +	status = status & HI6220_MBOX_STATUS_MASK;
> +	return (status == HI6220_MBOX_STATUS_IDLE);
> +}
> +
> +static int hi6220_mbox_send_data(struct mbox_chan *chan, void *msg)
> +{
> +	struct hi6220_mbox_chan *mchan = chan->con_priv;
> +	struct hi6220_mbox *mbox = mchan->parent;
> +	int irq = mchan->remote_irq;
> +	u32 *buf = msg;
> +	unsigned long flags;
> +	int i;
> +
> +	hi6220_mbox_set_status(mchan, HI6220_MBOX_STATUS_TX);

	hi6220_mbox_set_status is called in send_data context, and it is also 
called in hi6220_mbox_rx_interrupt and hi6220_mbox_tx_interrupt.

	no race condition here?

> +	if (mbox->tx_irq_mode)
> +		hi6220_mbox_set_mode(mchan, HI6220_MBOX_ACK_IRQ);
> +	else
> +		hi6220_mbox_set_mode(mchan, HI6220_MBOX_ACK_AUTOMATIC);
> +
> +	for (i = 0; i < (HI6220_MBOX_MSG_LEN >> 2); i++)
> +		writel(buf[i], mchan->slot + HI6220_MBOX_DATA_REG(i));
> +
> +	/* trigger remote request */
> +	spin_lock_irqsave(&mbox->lock, flags);
> +	writel(1 << irq, mbox->ipc + HI6220_MBOX_MCU_INT_RAW_REG);
> +	spin_unlock_irqrestore(&mbox->lock, flags);
> +	return 0;
> +}
> +
> +static void hi6220_mbox_rx_work(struct work_struct *work)
> +{
> +	struct hi6220_mbox_queue *mq =
> +			container_of(work, struct hi6220_mbox_queue, work);
> +	struct mbox_chan *chan = mq->chan;
> +	struct hi6220_mbox_chan *mchan = chan->con_priv;
> +	struct hi6220_mbox *mbox = mchan->parent;
> +	int irq = mchan->local_irq, len;
> +	u32 msg[HI6220_MBOX_MSG_LEN >> 2];
> +
> +	while (kfifo_len(&mq->fifo) >= sizeof(msg)) {
> +		len = kfifo_out(&mq->fifo, (unsigned char *)&msg, sizeof(msg));
> +		WARN_ON(len != sizeof(msg));
> +
> +		mbox_chan_received_data(chan, (void *)msg);
> +		spin_lock_irq(&mbox->lock);
> +		if (mq->full) {
> +			mq->full = false;
> +			writel(1 << irq,
> +				mbox->ipc + HI6220_MBOX_ACPU_INT_ENA_REG);
> +		}
> +		spin_unlock_irq(&mbox->lock);
> +	}
> +}
> +
> +static void hi6220_mbox_tx_interrupt(struct mbox_chan *chan)
> +{
> +	struct hi6220_mbox_chan *mchan = chan->con_priv;
> +	struct hi6220_mbox *mbox = mchan->parent;
> +	int irq = mchan->local_irq;
> +
> +	spin_lock(&mbox->lock);
> +	writel(1 << irq, mbox->ipc + HI6220_MBOX_ACPU_INT_CLR_REG);
> +	spin_unlock(&mbox->lock);
> +
> +	hi6220_mbox_set_status(mchan, HI6220_MBOX_STATUS_IDLE);
> +	mbox_chan_txdone(chan, 0);
> +}
> +
> +static void hi6220_mbox_rx_interrupt(struct mbox_chan *chan)
> +{
> +	struct hi6220_mbox_chan *mchan = chan->con_priv;
> +	struct hi6220_mbox_queue *mq = mchan->mq;
> +	struct hi6220_mbox *mbox = mchan->parent;
> +	int irq = mchan->local_irq;
> +	int msg[HI6220_MBOX_MSG_LEN >> 2];
> +	int i, len;
> +
> +	if (unlikely(kfifo_avail(&mq->fifo) < sizeof(msg))) {
> +		spin_lock(&mbox->lock);
> +		writel(1 << irq, mbox->ipc + HI6220_MBOX_ACPU_INT_DIS_REG);
> +		mq->full = true;
> +		spin_unlock(&mbox->lock);
> +		goto nomem;
> +	}
> +
> +	for (i = 0; i < (HI6220_MBOX_MSG_LEN >> 2); i++)
> +		msg[i] = readl(mchan->slot + HI6220_MBOX_DATA_REG(i));
> +
> +	/* clear IRQ source */
> +	spin_lock(&mbox->lock);
> +	writel(1 << irq, mbox->ipc + HI6220_MBOX_ACPU_INT_CLR_REG);
> +	spin_unlock(&mbox->lock);
> +
> +	hi6220_mbox_set_status(mchan, HI6220_MBOX_STATUS_IDLE);
> +
> +	len = kfifo_in(&mq->fifo, (unsigned char *)&msg, sizeof(msg));
> +	WARN_ON(len != sizeof(msg));
> +
> +nomem:
> +	schedule_work(&mq->work);
> +}
> +
> +static irqreturn_t hi6220_mbox_interrupt(int irq, void *p)
> +{
> +	struct hi6220_mbox *mbox = p;
> +	struct hi6220_mbox_chan *mchan;
> +	struct mbox_chan *chan;
> +	unsigned int state;
> +	unsigned int intr_bit;
> +
> +	state = readl(mbox->ipc + HI6220_MBOX_ACPU_INT_STAT_REG);
> +	if (!state) {
> +		dev_warn(mbox->dev, "%s: spurious interrupt\n",
> +			 __func__);
> +		return IRQ_HANDLED;
> +	}
> +
> +	while (state) {
> +		intr_bit = __ffs(state);
> +		state &= (state - 1);
> +
> +		chan = mbox->irq_map_chan[intr_bit];
> +		if (!chan) {
> +			dev_warn(mbox->dev, "%s: unexpected irq vector %d\n",
> +				 __func__, intr_bit);
> +			continue;
> +		}
> +
> +		mchan = chan->con_priv;
> +		if (mchan->dir == HI6220_MBOX_TX)
> +			hi6220_mbox_tx_interrupt(chan);
> +		else
> +			hi6220_mbox_rx_interrupt(chan);
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static struct hi6220_mbox_queue *hi6220_mbox_queue_alloc(
> +		struct mbox_chan *chan,
> +		void (*work)(struct work_struct *))
> +{
> +	struct hi6220_mbox_queue *mq;
> +
> +	mq = kzalloc(sizeof(struct hi6220_mbox_queue), GFP_KERNEL);
> +	if (!mq)
> +		return NULL;
> +
> +	if (kfifo_alloc(&mq->fifo, HI6220_MBOX_MSG_FIFO_SIZE, GFP_KERNEL))
> +		goto error;
> +
> +	mq->chan = chan;
> +	INIT_WORK(&mq->work, work);
> +	return mq;
> +
> +error:
> +	kfree(mq);
> +	return NULL;
> +}
> +
> +static void hi6220_mbox_queue_free(struct hi6220_mbox_queue *mq)
> +{
> +	kfifo_free(&mq->fifo);
> +	kfree(mq);
> +}
> +
> +static int hi6220_mbox_startup(struct mbox_chan *chan)
> +{
> +	struct hi6220_mbox_chan *mchan = chan->con_priv;
> +	struct hi6220_mbox *mbox = mchan->parent;
> +	unsigned int irq = mchan->local_irq;
> +	struct hi6220_mbox_queue *mq;
> +	unsigned long flags;
> +
> +	mq = hi6220_mbox_queue_alloc(chan, hi6220_mbox_rx_work);
> +	if (!mq)
> +		return -ENOMEM;
> +	mchan->mq = mq;
> +	mbox->irq_map_chan[irq] = (void *)chan;
> +
> +	/* enable interrupt */
> +	spin_lock_irqsave(&mbox->lock, flags);
> +	writel(1 << irq, mbox->ipc + HI6220_MBOX_ACPU_INT_ENA_REG);
> +	spin_unlock_irqrestore(&mbox->lock, flags);
> +	return 0;
> +}
> +
> +static void hi6220_mbox_shutdown(struct mbox_chan *chan)
> +{
> +	struct hi6220_mbox_chan *mchan = chan->con_priv;
> +	struct hi6220_mbox *mbox = mchan->parent;
> +	unsigned int irq = mchan->local_irq;
> +	unsigned long flags;
> +
> +	/* disable interrupt */
> +	spin_lock_irqsave(&mbox->lock, flags);
> +	writel(1 << irq, mbox->ipc + HI6220_MBOX_ACPU_INT_DIS_REG);
> +	spin_unlock_irqrestore(&mbox->lock, flags);
> +
> +	mbox->irq_map_chan[irq] = NULL;
> +	flush_work(&mchan->mq->work);
> +	hi6220_mbox_queue_free(mchan->mq);
> +}
> +
> +static struct mbox_chan_ops hi6220_mbox_chan_ops = {
> +	.send_data    = hi6220_mbox_send_data,
> +	.startup      = hi6220_mbox_startup,
> +	.shutdown     = hi6220_mbox_shutdown,
> +	.last_tx_done = hi6220_mbox_last_tx_done,
> +};
> +
> +static void hi6220_mbox_init_hw(struct hi6220_mbox *mbox)
> +{
> +	struct hi6220_mbox_chan init_data[HI6220_MBOX_CHAN_NUM] = {
> +		{ HI6220_MBOX_RX, HI6220_CORE_MCU, 1, 10 },
> +		{ HI6220_MBOX_TX, HI6220_CORE_MCU, 0, 11 },
> +	};
> +	struct hi6220_mbox_chan *mchan = mbox->mchan;
> +	int i;
> +
> +	for (i = 0; i < HI6220_MBOX_CHAN_NUM; i++) {
> +		memcpy(&mchan[i], &init_data[i], sizeof(*mchan));
> +		mchan[i].slot = mbox->buf + HI6220_MBOX_CHAN_SLOT_SIZE * i;
> +		mchan[i].parent = mbox;
> +	}
> +
> +	/* mask and clear all interrupt vectors */
> +	writel(0x0,  mbox->ipc + HI6220_MBOX_ACPU_INT_MSK_REG);
> +	writel(~0x0, mbox->ipc + HI6220_MBOX_ACPU_INT_CLR_REG);
> +
> +	/* use interrupt for tx's ack */
> +	mbox->tx_irq_mode = true;
> +}
> +
> +static const struct of_device_id hi6220_mbox_of_match[] = {
> +	{ .compatible = "hisilicon,hi6220-mbox", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, hi6220_mbox_of_match);
> +
> +static int hi6220_mbox_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct hi6220_mbox *mbox;
> +	struct resource *res;
> +	int i, err;
> +
> +	mbox = devm_kzalloc(dev, sizeof(*mbox), GFP_KERNEL);
> +	if (!mbox)
> +		return -ENOMEM;
> +
> +	mbox->dev = dev;
> +	mbox->chan_num = HI6220_MBOX_CHAN_NUM;
> +	mbox->mchan = devm_kzalloc(dev,
> +		mbox->chan_num * sizeof(*mbox->mchan), GFP_KERNEL);
> +	if (!mbox->mchan)
> +		return -ENOMEM;
> +
> +	mbox->chan = devm_kzalloc(dev,
> +		mbox->chan_num * sizeof(*mbox->chan), GFP_KERNEL);
> +	if (!mbox->chan)
> +		return -ENOMEM;
> +
> +	mbox->irq = platform_get_irq(pdev, 0);
> +	if (mbox->irq < 0)
> +		return mbox->irq;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	mbox->ipc = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(mbox->ipc)) {
> +		dev_err(dev, "ioremap ipc failed\n");
> +		return PTR_ERR(mbox->ipc);
> +	}
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> +	mbox->buf = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(mbox->buf)) {
> +		dev_err(dev, "ioremap buffer failed\n");
> +		return PTR_ERR(mbox->buf);
> +	}
> +
> +	err = devm_request_irq(dev, mbox->irq, hi6220_mbox_interrupt, 0,
> +			dev_name(dev), mbox);
> +	if (err) {
> +		dev_err(dev, "Failed to register a mailbox IRQ handler: %d\n",
> +			err);
> +		return -ENODEV;
> +	}
> +
> +	/* init hardware parameters */
> +	hi6220_mbox_init_hw(mbox);
> +
> +	spin_lock_init(&mbox->lock);
> +
> +	for (i = 0; i < mbox->chan_num; i++) {
> +		mbox->chan[i].con_priv = &mbox->mchan[i];
> +		mbox->irq_map_chan[i] = NULL;
> +	}
> +
> +	mbox->controller.dev = dev;
> +	mbox->controller.chans = &mbox->chan[0];
> +	mbox->controller.num_chans = mbox->chan_num;
> +	mbox->controller.ops = &hi6220_mbox_chan_ops;
> +
> +	if (mbox->tx_irq_mode)
> +		mbox->controller.txdone_irq = true;
> +	else {
> +		mbox->controller.txdone_poll = true;
> +		mbox->controller.txpoll_period = 5;
> +	}
> +
> +	err = mbox_controller_register(&mbox->controller);
> +	if (err) {
> +		dev_err(dev, "Failed to register mailbox %d\n", err);
> +		return err;
> +	}
> +
> +	platform_set_drvdata(pdev, mbox);
> +	dev_info(dev, "Mailbox enabled\n");
> +	return 0;
> +}
> +
> +static int hi6220_mbox_remove(struct platform_device *pdev)
> +{
> +	struct hi6220_mbox *mbox = platform_get_drvdata(pdev);
> +
> +	mbox_controller_unregister(&mbox->controller);
> +	return 0;
> +}
> +
> +static struct platform_driver hi6220_mbox_driver = {
> +	.driver = {
> +		.name = "hi6220-mbox",
> +		.owner = THIS_MODULE,
> +		.of_match_table = hi6220_mbox_of_match,
> +	},
> +	.probe	= hi6220_mbox_probe,
> +	.remove	= hi6220_mbox_remove,
> +};
> +
> +static int __init hi6220_mbox_init(void)
> +{
> +	return platform_driver_register(&hi6220_mbox_driver);
> +}
> +core_initcall(hi6220_mbox_init);
> +
> +static void __exit hi6220_mbox_exit(void)
> +{
> +	platform_driver_unregister(&hi6220_mbox_driver);
> +}
> +module_exit(hi6220_mbox_exit);
> +
> +MODULE_AUTHOR("Leo Yan <leo.yan@...aro.org>");
> +MODULE_DESCRIPTION("Hi6220 mailbox driver");
> +MODULE_LICENSE("GPL v2");
>


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists