| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <BY1PR03MB1388094367475E41BA4DB7BD9A650@BY1PR03MB1388.namprd03.prod.outlook.com>
Date: Fri, 21 Aug 2015 08:08:46 +0000
From: Chen Bough <Haibo.Chen@...escale.com>
To: Dmitry Torokhov <dmitry.torokhov@...il.com>
CC: "robh+dt@...nel.org" <robh+dt@...nel.org>,
"pawel.moll@....com" <pawel.moll@....com>,
"mark.rutland@....com" <mark.rutland@....com>,
"ijc+devicetree@...lion.org.uk" <ijc+devicetree@...lion.org.uk>,
"galak@...eaurora.org" <galak@...eaurora.org>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
"linux@....linux.org.uk" <linux@....linux.org.uk>,
"hans.verkuil@...co.com" <hans.verkuil@...co.com>,
"hadess@...ess.net" <hadess@...ess.net>,
"mchehab@....samsung.com" <mchehab@....samsung.com>,
"mamlinav@...il.com" <mamlinav@...il.com>,
"arnd@...db.de" <arnd@...db.de>,
"jonathar@...adcom.com" <jonathar@...adcom.com>,
"hdegoede@...hat.com" <hdegoede@...hat.com>,
"christian.gmeiner@...il.com" <christian.gmeiner@...il.com>,
"scott.liu@....com.tw" <scott.liu@....com.tw>,
"geert@...ux-m68k.org" <geert@...ux-m68k.org>,
"benjamin.tissoires@...hat.com" <benjamin.tissoires@...hat.com>,
"sebastien.szymanski@...adeus.com" <sebastien.szymanski@...adeus.com>,
"sbranden@...adcom.com" <sbranden@...adcom.com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-input@...r.kernel.org" <linux-input@...r.kernel.org>
Subject: RE: [PATCH v2 1/5] input: touchscreen: add imx6ul_tsc driver support
Hi Dmitry,
Thanks for your patient review, especially for the patch you attached.
I test your patch these days, with below change, touch can work normally.
(also change the xnur to active low in dts)
In probe function:
> - tsc->xnur_gpio = of_get_named_gpio(np, "xnur-gpio", 0);
> - err = gpio_request_one(tsc->xnur_gpio, GPIOF_IN, "tsc_X-");
> - if (err) {
> - dev_err(&pdev->dev, "failed to request GPIO tsc_X-\n");
> + input_set_drvdata(input_dev, tsc);
> +
> + tsc->dev = &pdev->dev;
> + tsc->input = input_dev;
> + init_completion(&tsc->completion);
> +
> + tsc->xnur_gpio = devm_gpiod_get(&pdev->dev, "xnur-gpio", GPIOD_IN);
Here, we need to change "xnur-gpio" to "xnur", otherwise the gpio request will be failed.
This is because gpiod common code already add suffix '-gpio' or 'gpios'.
For others, your patch seems normal and rational. I will add your patch and send patch-V3.
Thanks again!
Best Regards
Haibo Chen
> -----Original Message-----
> From: Dmitry Torokhov [mailto:dmitry.torokhov@...il.com]
> Sent: Wednesday, August 19, 2015 1:12 PM
> To: Chen Haibo-B51421
> Cc: robh+dt@...nel.org; pawel.moll@....com; mark.rutland@....com;
> ijc+devicetree@...lion.org.uk; galak@...eaurora.org; shawnguo@...nel.org;
> kernel@...gutronix.de; linux@....linux.org.uk; hans.verkuil@...co.com;
> hadess@...ess.net; mchehab@....samsung.com; mamlinav@...il.com;
> arnd@...db.de; jonathar@...adcom.com; hdegoede@...hat.com;
> christian.gmeiner@...il.com; scott.liu@....com.tw; geert@...ux-m68k.org;
> benjamin.tissoires@...hat.com; sebastien.szymanski@...adeus.com;
> sbranden@...adcom.com; devicetree@...r.kernel.org; linux-
> kernel@...r.kernel.org; linux-arm-kernel@...ts.infradead.org; linux-
> input@...r.kernel.org
> Subject: Re: [PATCH v2 1/5] input: touchscreen: add imx6ul_tsc driver
> support
>
> Hi Haibo,
>
> On Tue, Jul 28, 2015 at 05:58:37PM +0800, Haibo Chen wrote:
> > Freescale i.MX6UL contains a internal touchscreen controller, this
> > patch add a driver to support this controller.
> >
>
> This looks pretty reasonable; just a few comments below.
>
> > Signed-off-by: Haibo Chen <haibo.chen@...escale.com>
> > ---
> > drivers/input/touchscreen/Kconfig | 12 +
> > drivers/input/touchscreen/Makefile | 1 +
> > drivers/input/touchscreen/imx6ul_tsc.c | 504
> > +++++++++++++++++++++++++++++++++
> > 3 files changed, 517 insertions(+)
> > create mode 100644 drivers/input/touchscreen/imx6ul_tsc.c
> >
> > diff --git a/drivers/input/touchscreen/Kconfig
> > b/drivers/input/touchscreen/Kconfig
> > index 5b272ba..32c300d 100644
> > --- a/drivers/input/touchscreen/Kconfig
> > +++ b/drivers/input/touchscreen/Kconfig
> > @@ -479,6 +479,18 @@ config TOUCHSCREEN_MTOUCH
> > To compile this driver as a module, choose M here: the
> > module will be called mtouch.
> >
> > +config TOUCHSCREEN_IMX6UL_TSC
> > + tristate "Freescale i.MX6UL touchscreen controller"
> > + depends on OF
> > + help
> > + Say Y here if you have a Freescale i.MX6UL, and want to
> > + use the internal touchscreen controller.
> > +
> > + If unsure, say N.
> > +
> > + To compile this driver as a module, choose M here: the
> > + moduel will be called imx6ul_tsc.
> > +
> > config TOUCHSCREEN_INEXIO
> > tristate "iNexio serial touchscreens"
> > select SERIO
> > diff --git a/drivers/input/touchscreen/Makefile
> > b/drivers/input/touchscreen/Makefile
> > index c85aae2..9379b32 100644
> > --- a/drivers/input/touchscreen/Makefile
> > +++ b/drivers/input/touchscreen/Makefile
> > @@ -38,6 +38,7 @@ obj-$(CONFIG_TOUCHSCREEN_EGALAX) += egalax_ts.o
> > obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o
> > obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix.o
> > obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o
> > +obj-$(CONFIG_TOUCHSCREEN_IMX6UL_TSC) += imx6ul_tsc.o
> > obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o
> > obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += intel-mid-touch.o
> > obj-$(CONFIG_TOUCHSCREEN_IPROC) += bcm_iproc_tsc.o
> > diff --git a/drivers/input/touchscreen/imx6ul_tsc.c
> > b/drivers/input/touchscreen/imx6ul_tsc.c
> > new file mode 100644
> > index 0000000..807f1db
> > --- /dev/null
> > +++ b/drivers/input/touchscreen/imx6ul_tsc.c
> > @@ -0,0 +1,504 @@
> > +/*
> > + * Freescale i.MX6UL touchscreen controller driver
> > + *
> > + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + */
> > +
> > +#include <linux/errno.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/gpio.h>
> > +#include <linux/input.h>
> > +#include <linux/slab.h>
> > +#include <linux/completion.h>
> > +#include <linux/delay.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/of_gpio.h>
> > +#include <linux/of_irq.h>
>
> I do not think you need of_irq and of_device.
>
> > +#include <linux/interrupt.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/clk.h>
> > +#include <linux/io.h>
> > +
> > +/* ADC configuration registers field define */
> > +#define ADC_AIEN (0x1 << 7)
> > +#define ADC_CONV_DISABLE 0x1F
> > +#define ADC_CAL (0x1 << 7)
> > +#define ADC_CALF 0x2
> > +#define ADC_12BIT_MODE (0x2 << 2)
> > +#define ADC_IPG_CLK 0x00
> > +#define ADC_CLK_DIV_8 (0x03 << 5)
> > +#define ADC_SHORT_SAMPLE_MODE (0x0 << 4)
> > +#define ADC_HARDWARE_TRIGGER (0x1 << 13)
> > +#define SELECT_CHANNEL_4 0x04
> > +#define SELECT_CHANNEL_1 0x01
> > +#define DISABLE_CONVERSION_INT (0x0 << 7)
> > +
> > +/* ADC registers */
> > +#define REG_ADC_HC0 0x00
> > +#define REG_ADC_HC1 0x04
> > +#define REG_ADC_HC2 0x08
> > +#define REG_ADC_HC3 0x0C
> > +#define REG_ADC_HC4 0x10
> > +#define REG_ADC_HS 0x14
> > +#define REG_ADC_R0 0x18
> > +#define REG_ADC_CFG 0x2C
> > +#define REG_ADC_GC 0x30
> > +#define REG_ADC_GS 0x34
> > +
> > +#define ADC_TIMEOUT msecs_to_jiffies(100)
> > +
> > +/* TSC registers */
> > +#define REG_TSC_BASIC_SETING 0x00
> > +#define REG_TSC_PRE_CHARGE_TIME 0x10
> > +#define REG_TSC_FLOW_CONTROL 0x20
> > +#define REG_TSC_MEASURE_VALUE 0x30
> > +#define REG_TSC_INT_EN 0x40
> > +#define REG_TSC_INT_SIG_EN 0x50
> > +#define REG_TSC_INT_STATUS 0x60
> > +#define REG_TSC_DEBUG_MODE 0x70
> > +#define REG_TSC_DEBUG_MODE2 0x80
> > +
> > +/* TSC configuration registers field define */
> > +#define DETECT_4_WIRE_MODE (0x0 << 4)
> > +#define AUTO_MEASURE 0x1
> > +#define MEASURE_SIGNAL 0x1
> > +#define DETECT_SIGNAL (0x1 << 4)
> > +#define VALID_SIGNAL (0x1 << 8)
> > +#define MEASURE_INT_EN 0x1
> > +#define MEASURE_SIG_EN 0x1
> > +#define VALID_SIG_EN (0x1 << 8)
> > +#define DE_GLITCH_2 (0x2 << 29)
> > +#define START_SENSE (0x1 << 12)
> > +#define TSC_DISABLE (0x1 << 16)
> > +#define DETECT_MODE 0x2
> > +
> > +struct imx6ul_tsc {
> > + struct device *dev;
> > + struct input_dev *input;
> > + void __iomem *tsc_regs;
> > + void __iomem *adc_regs;
> > + struct clk *tsc_clk;
> > + struct clk *adc_clk;
> > +
> > + int xnur_gpio;
> > + int measure_delay_time;
> > + int pre_charge_time;
> > +
> > + struct completion completion;
> > +};
> > +
> > +/*
> > + * TSC module need ADC to get the measure value. So
> > + * before config TSC, we should initialize ADC module.
> > + */
> > +static void imx6ul_adc_init(struct imx6ul_tsc *tsc) {
> > + int adc_hc = 0;
> > + int adc_gc;
> > + int adc_gs;
> > + int adc_cfg;
> > + int timeout;
> > +
> > + adc_cfg = readl(tsc->adc_regs + REG_ADC_CFG);
> > + adc_cfg |= ADC_12BIT_MODE | ADC_IPG_CLK;
> > + adc_cfg |= ADC_CLK_DIV_8 | ADC_SHORT_SAMPLE_MODE;
> > + adc_cfg &= ~ADC_HARDWARE_TRIGGER;
> > + writel(adc_cfg, tsc->adc_regs + REG_ADC_CFG);
> > +
> > + /* enable calibration interrupt */
> > + adc_hc |= ADC_AIEN;
> > + adc_hc |= ADC_CONV_DISABLE;
> > + writel(adc_hc, tsc->adc_regs + REG_ADC_HC0);
> > +
> > + /* start ADC calibration */
> > + adc_gc = readl(tsc->adc_regs + REG_ADC_GC);
> > + adc_gc |= ADC_CAL;
> > + writel(adc_gc, tsc->adc_regs + REG_ADC_GC);
> > +
>
> Since this is called on every resume you need to reinit completion;
> probably at the beginning of this function.
>
> > + timeout = wait_for_completion_timeout
> > + (&tsc->completion, ADC_TIMEOUT);
> > + if (timeout == 0)
> > + dev_err(tsc->dev, "Timeout for adc calibration\n");
> > +
> > + adc_gs = readl(tsc->adc_regs + REG_ADC_GS);
> > + if (adc_gs & ADC_CALF)
> > + dev_err(tsc->dev, "ADC calibration failed\n");
> > +
> > + /* TSC need the ADC work in hardware trigger */
> > + adc_cfg = readl(tsc->adc_regs + REG_ADC_CFG);
> > + adc_cfg |= ADC_HARDWARE_TRIGGER;
> > + writel(adc_cfg, tsc->adc_regs + REG_ADC_CFG); }
> > +
> > +/*
> > + * This is a TSC workaround. Currently TSC misconnect two
> > + * ADC channels, this function remap channel configure for
> > + * hardware trigger.
> > + */
> > +static void imx6ul_tsc_channel_config(struct imx6ul_tsc *tsc) {
> > + int adc_hc0, adc_hc1, adc_hc2, adc_hc3, adc_hc4;
> > +
> > + adc_hc0 = DISABLE_CONVERSION_INT;
> > + writel(adc_hc0, tsc->adc_regs + REG_ADC_HC0);
> > +
> > + adc_hc1 = DISABLE_CONVERSION_INT | SELECT_CHANNEL_4;
> > + writel(adc_hc1, tsc->adc_regs + REG_ADC_HC1);
> > +
> > + adc_hc2 = DISABLE_CONVERSION_INT;
> > + writel(adc_hc2, tsc->adc_regs + REG_ADC_HC2);
> > +
> > + adc_hc3 = DISABLE_CONVERSION_INT | SELECT_CHANNEL_1;
> > + writel(adc_hc3, tsc->adc_regs + REG_ADC_HC3);
> > +
> > + adc_hc4 = DISABLE_CONVERSION_INT;
> > + writel(adc_hc4, tsc->adc_regs + REG_ADC_HC4); }
> > +
> > +/*
> > + * TSC setting, confige the pre-charge time and measure delay time.
> > + * different touch screen may need different pre-charge time and
> > + * measure delay time.
> > + */
> > +static void imx6ul_tsc_set(struct imx6ul_tsc *tsc) {
> > + int basic_setting = 0;
> > + int start;
> > +
> > + basic_setting |= tsc->measure_delay_time << 8;
> > + basic_setting |= DETECT_4_WIRE_MODE | AUTO_MEASURE;
> > + writel(basic_setting, tsc->tsc_regs + REG_TSC_BASIC_SETING);
> > +
> > + writel(DE_GLITCH_2, tsc->tsc_regs + REG_TSC_DEBUG_MODE2);
> > +
> > + writel(tsc->pre_charge_time, tsc->tsc_regs +
> REG_TSC_PRE_CHARGE_TIME);
> > + writel(MEASURE_INT_EN, tsc->tsc_regs + REG_TSC_INT_EN);
> > + writel(MEASURE_SIG_EN | VALID_SIG_EN,
> > + tsc->tsc_regs + REG_TSC_INT_SIG_EN);
> > +
> > + /* start sense detection */
> > + start = readl(tsc->tsc_regs + REG_TSC_FLOW_CONTROL);
> > + start |= START_SENSE;
> > + start &= ~TSC_DISABLE;
> > + writel(start, tsc->tsc_regs + REG_TSC_FLOW_CONTROL); }
> > +
> > +static void imx6ul_tsc_init(struct imx6ul_tsc *tsc) {
> > + imx6ul_adc_init(tsc);
> > + imx6ul_tsc_channel_config(tsc);
> > + imx6ul_tsc_set(tsc);
> > +}
> > +
> > +static irqreturn_t tsc_irq_fn(int irq, void *dev_id) {
> > + struct imx6ul_tsc *tsc = (struct imx6ul_tsc *)dev_id;
>
> No need to cast void pointers.
>
> > + int status;
> > + int value;
> > + int x, y;
> > + int xnur;
> > + int debug_mode2;
> > + int state_machine;
> > + int start;
> > + unsigned long timeout;
> > +
> > + status = readl(tsc->tsc_regs + REG_TSC_INT_STATUS);
> > +
> > + /* write 1 to clear the bit measure-signal */
> > + writel(MEASURE_SIGNAL | DETECT_SIGNAL,
> > + tsc->tsc_regs + REG_TSC_INT_STATUS);
> > +
> > + /* It's a HW self-clean bit. Set this bit and start sense detection
> */
> > + start = readl(tsc->tsc_regs + REG_TSC_FLOW_CONTROL);
> > + start |= START_SENSE;
> > + writel(start, tsc->tsc_regs + REG_TSC_FLOW_CONTROL);
> > +
> > + if (status & MEASURE_SIGNAL) {
> > + value = readl(tsc->tsc_regs + REG_TSC_MEASURE_VALUE);
> > + x = (value >> 16) & 0x0fff;
> > + y = value & 0x0fff;
> > +
> > + /*
> > + * Delay some time(max 2ms), wait the pre-charge done.
> > + * After the pre-change mode, TSC go into detect mode.
> > + * And in detect mode, we can get the xnur gpio value.
> > + * If xnur is low, this means the touch screen still
> > + * be touched. If xnur is high, this means finger leave
> > + * the touch screen.
> > + */
> > + timeout = jiffies + HZ/500;
> > + do {
> > + if (time_after(jiffies, timeout)) {
> > + xnur = 0;
> > + goto touch_event;
> > + }
> > + usleep_range(200, 400);
> > + debug_mode2 = readl(tsc->tsc_regs +
> REG_TSC_DEBUG_MODE2);
> > + state_machine = (debug_mode2 >> 20) & 0x7;
> > + } while (state_machine != DETECT_MODE);
> > + usleep_range(200, 400);
> > +
> > + xnur = gpio_get_value(tsc->xnur_gpio);
>
> It seems to me that this GPIO is actually active low: we reporting active
> touch as long as we read 0.
>
> > +touch_event:
> > + if (xnur == 0) {
> > + input_report_key(tsc->input, BTN_TOUCH, 1);
> > + input_report_abs(tsc->input, ABS_X, x);
> > + input_report_abs(tsc->input, ABS_Y, y);
> > + } else
> > + input_report_key(tsc->input, BTN_TOUCH, 0);
>
> If one branch has braces all of them should have braces.
>
> > +
> > + input_sync(tsc->input);
> > + }
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static irqreturn_t adc_irq_fn(int irq, void *dev_id) {
> > + struct imx6ul_tsc *tsc = (struct imx6ul_tsc *)dev_id;
> > + int coco;
> > + int value;
> > +
> > + coco = readl(tsc->adc_regs + REG_ADC_HS);
> > + if (coco & 0x01) {
> > + value = readl(tsc->adc_regs + REG_ADC_R0);
> > + complete(&tsc->completion);
> > + }
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static const struct of_device_id imx6ul_tsc_match[] = {
> > + { .compatible = "fsl,imx6ul-tsc", },
> > + { /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, imx6ul_tsc_match);
> > +
> > +static int imx6ul_tsc_probe(struct platform_device *pdev) {
> > + struct imx6ul_tsc *tsc;
> > + struct resource *tsc_mem;
> > + struct resource *adc_mem;
> > + struct input_dev *input_dev;
> > + struct device_node *np = pdev->dev.of_node;
> > + int err;
> > + int tsc_irq;
> > + int adc_irq;
> > +
> > + tsc = devm_kzalloc(&pdev->dev, sizeof(struct imx6ul_tsc),
> GFP_KERNEL);
> > + input_dev = devm_input_allocate_device(&pdev->dev);
>
> Using devm does not mean you do not need to check results of memory
> allocation.
>
> > +
> > + tsc->dev = &pdev->dev;
> > +
> > + tsc->input = input_dev;
> > + tsc->input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
> > + tsc->input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
> > + input_set_abs_params(tsc->input, ABS_X, 0, 0xFFF, 0, 0);
> > + input_set_abs_params(tsc->input, ABS_Y, 0, 0xFFF, 0, 0);
> > +
> > + tsc->input->name = "iMX6UL TouchScreen Controller";
> > +
> > + tsc->xnur_gpio = of_get_named_gpio(np, "xnur-gpio", 0);
> > + err = gpio_request_one(tsc->xnur_gpio, GPIOF_IN, "tsc_X-");
>
> Why are you not using devm for gpio? Actually, why don't you also use
> gpiod? As is you are leaking that gpio in all error paths below.
>
> > + if (err) {
> > + dev_err(&pdev->dev, "failed to request GPIO tsc_X-\n");
> > + return err;
> > + }
> > +
> > + tsc_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + tsc->tsc_regs = devm_ioremap_resource(&pdev->dev, tsc_mem);
> > + if (IS_ERR(tsc->tsc_regs)) {
> > + dev_err(&pdev->dev, "failed to remap tsc memory\n");
> > + err = PTR_ERR(tsc->tsc_regs);
> > + return err;
> > + }
> > +
> > + adc_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> > + tsc->adc_regs = devm_ioremap_resource(&pdev->dev, adc_mem);
> > + if (IS_ERR(tsc->adc_regs)) {
> > + dev_err(&pdev->dev, "failed to remap adc memory\n");
> > + err = PTR_ERR(tsc->adc_regs);
> > + return err;
> > + }
> > +
> > + tsc->tsc_clk = devm_clk_get(&pdev->dev, "tsc");
> > + if (IS_ERR(tsc->tsc_clk)) {
> > + dev_err(&pdev->dev, "failed getting tsc clock\n");
> > + err = PTR_ERR(tsc->tsc_clk);
> > + return err;
> > + }
> > +
> > + tsc->adc_clk = devm_clk_get(&pdev->dev, "adc");
> > + if (IS_ERR(tsc->adc_clk)) {
> > + dev_err(&pdev->dev, "failed getting adc clock\n");
> > + err = PTR_ERR(tsc->adc_clk);
> > + return err;
> > + }
> > +
> > + tsc_irq = platform_get_irq(pdev, 0);
> > + if (tsc_irq < 0) {
> > + dev_err(&pdev->dev, "no tsc irq resource?\n");
> > + return tsc_irq;
> > + }
> > +
> > + adc_irq = platform_get_irq(pdev, 1);
> > + if (adc_irq <= 0) {
> > + dev_err(&pdev->dev, "no adc irq resource?\n");
> > + return adc_irq;
> > + }
> > +
> > + err = devm_request_threaded_irq(tsc->dev, tsc_irq,
> > + NULL, tsc_irq_fn,
> > + IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> > + dev_name(&pdev->dev), tsc);
> > + if (err < 0) {
> > + dev_err(&pdev->dev,
> > + "failed requesting tsc irq %d\n",
> > + tsc_irq);
> > + return err;
> > + }
> > +
> > + err = devm_request_irq(tsc->dev, adc_irq,
> > + adc_irq_fn, 0,
> > + dev_name(&pdev->dev), tsc);
> > + if (err < 0) {
> > + dev_err(&pdev->dev,
> > + "failed requesting adc irq %d\n",
> > + adc_irq);
> > + return err;
> > + }
> > +
> > + err = of_property_read_u32(np, "measure-delay-time",
> > + &tsc->measure_delay_time);
> > + if (err)
> > + tsc->measure_delay_time = 0xffff;
> > +
> > + err = of_property_read_u32(np, "pre-charge-time",
> > + &tsc->pre_charge_time);
> > + if (err)
> > + tsc->pre_charge_time = 0xfff;
> > +
> > + init_completion(&tsc->completion);
> > +
> > + err = clk_prepare_enable(tsc->adc_clk);
> > + if (err) {
> > + dev_err(&pdev->dev,
> > + "Could not prepare or enable the adc clock.\n");
> > + return err;
> > + }
> > +
> > + err = clk_prepare_enable(tsc->tsc_clk);
> > + if (err) {
> > + dev_err(&pdev->dev,
> > + "Could not prepare or enable the tsc clock.\n");
> > + goto error_tsc_clk_enable;
> > + }
> > +
> > + err = input_register_device(tsc->input);
> > + if (err < 0) {
> > + dev_err(&pdev->dev, "failed to register input device\n");
> > + err = -EIO;
> > + goto err_input_register;
> > + }
> > +
> > + imx6ul_tsc_init(tsc);
>
> Enabling clock and initializing the controller is better in open() method
> of input device. If you also implement close() you can get rid of
> remove().
>
> > +
> > + platform_set_drvdata(pdev, tsc);
> > + return 0;
> > +
> > +err_input_register:
> > + clk_disable_unprepare(tsc->tsc_clk);
> > +error_tsc_clk_enable:
> > + clk_disable_unprepare(tsc->adc_clk);
> > +
> > + return err;
> > +}
> > +
> > +static void imx6ul_tsc_disable(struct imx6ul_tsc *tsc) {
> > + int tsc_flow;
> > + int adc_cfg;
> > +
> > + /* TSC controller enters to idle status */
> > + tsc_flow = readl(tsc->tsc_regs + REG_TSC_FLOW_CONTROL);
> > + tsc_flow |= TSC_DISABLE;
> > + writel(tsc_flow, tsc->tsc_regs + REG_TSC_FLOW_CONTROL);
> > +
> > + /* ADC controller enters to stop mode */
> > + adc_cfg = readl(tsc->adc_regs + REG_ADC_HC0);
> > + adc_cfg |= ADC_CONV_DISABLE;
> > + writel(adc_cfg, tsc->adc_regs + REG_ADC_HC0); }
> > +
> > +static int imx6ul_tsc_remove(struct platform_device *pdev) {
> > + struct imx6ul_tsc *tsc = platform_get_drvdata(pdev);
> > +
> > + imx6ul_tsc_disable(tsc);
> > +
> > + clk_disable_unprepare(tsc->tsc_clk);
> > + clk_disable_unprepare(tsc->adc_clk);
> > + input_unregister_device(tsc->input);
> > + kfree(tsc);
>
> Tsc is allocated with devm(), you can't kfree() it.
> > +
> > + return 0;
> > +}
> > +
> > +static int __maybe_unused imx6ul_tsc_suspend(struct device *dev) {
> > + struct platform_device *pdev = to_platform_device(dev);
> > + struct imx6ul_tsc *tsc = platform_get_drvdata(pdev);
> > +
> > + imx6ul_tsc_disable(tsc);
> > +
> > + clk_disable_unprepare(tsc->tsc_clk);
> > + clk_disable_unprepare(tsc->adc_clk);
> > +
> > + return 0;
> > +}
> > +
> > +static int __maybe_unused imx6ul_tsc_resume(struct device *dev) {
> > + struct platform_device *pdev = to_platform_device(dev);
> > + struct imx6ul_tsc *tsc = platform_get_drvdata(pdev);
> > + int err;
> > +
> > + err = clk_prepare_enable(tsc->adc_clk);
> > + if (err)
> > + return err;
> > +
> > + err = clk_prepare_enable(tsc->tsc_clk);
> > + if (err) {
> > + clk_disable_unprepare(tsc->adc_clk);
> > + return err;
> > + }
> > +
> > + imx6ul_tsc_init(tsc);
> > + return 0;
> > +}
> > +
> > +static SIMPLE_DEV_PM_OPS(imx6ul_tsc_pm_ops,
> > + imx6ul_tsc_suspend,
> > + imx6ul_tsc_resume);
> > +
> > +static struct platform_driver imx6ul_tsc_driver = {
> > + .driver = {
> > + .name = "imx6ul-tsc",
> > + .owner = THIS_MODULE,
> > + .of_match_table = imx6ul_tsc_match,
> > + .pm = &imx6ul_tsc_pm_ops,
> > + },
> > + .probe = imx6ul_tsc_probe,
> > + .remove = imx6ul_tsc_remove,
> > +};
> > +module_platform_driver(imx6ul_tsc_driver);
> > +
> > +MODULE_AUTHOR("Haibo Chen <haibo.chen@...escale.com>");
> > +MODULE_DESCRIPTION("Freescale i.MX6UL Touchscreen controller
> > +driver"); MODULE_LICENSE("GPL v2");
> > --
> > 1.9.1
> >
>
> Can you try the patch below and let me know if it still works (you'll
> need to adjust your DTS for xnur gpio being active low).
>
> Thanks!
>
> --
> Dmitry
>
> Input: imx6ul_tsc - misc changes
>
> From: Dmitry Torokhov <dmitry.torokhov@...il.com>
>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@...il.com>
> ---
> .../bindings/input/touchscreen/imx6ul_tsc.txt | 2
> drivers/input/touchscreen/Kconfig | 2
> drivers/input/touchscreen/imx6ul_tsc.c | 262 +++++++++++---
> ------
> 3 files changed, 143 insertions(+), 123 deletions(-)
>
> diff --git
> a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
> b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
> index ac41c32..c933588 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
> @@ -29,7 +29,7 @@ Example:
> clock-names = "tsc", "adc";
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_tsc>;
> - xnur-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
> + xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
> measure-delay-time = <0xfff>;
> pre-charge-time = <0xffff>;
> status = "okay";
> diff --git a/drivers/input/touchscreen/Kconfig
> b/drivers/input/touchscreen/Kconfig
> index 9a1a293..5ecf19b 100644
> --- a/drivers/input/touchscreen/Kconfig
> +++ b/drivers/input/touchscreen/Kconfig
> @@ -481,7 +481,7 @@ config TOUCHSCREEN_MTOUCH
>
> config TOUCHSCREEN_IMX6UL_TSC
> tristate "Freescale i.MX6UL touchscreen controller"
> - depends on OF
> + depends on (OF && GPIOLIB) || COMPILE_TEST
> help
> Say Y here if you have a Freescale i.MX6UL, and want to
> use the internal touchscreen controller.
> diff --git a/drivers/input/touchscreen/imx6ul_tsc.c
> b/drivers/input/touchscreen/imx6ul_tsc.c
> index 807f1db..1d028ed 100644
> --- a/drivers/input/touchscreen/imx6ul_tsc.c
> +++ b/drivers/input/touchscreen/imx6ul_tsc.c
> @@ -11,15 +11,12 @@
> #include <linux/errno.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/input.h>
> #include <linux/slab.h>
> #include <linux/completion.h>
> #include <linux/delay.h>
> #include <linux/of.h>
> -#include <linux/of_device.h>
> -#include <linux/of_gpio.h>
> -#include <linux/of_irq.h>
> #include <linux/interrupt.h>
> #include <linux/platform_device.h>
> #include <linux/clk.h>
> @@ -85,8 +82,8 @@ struct imx6ul_tsc {
> void __iomem *adc_regs;
> struct clk *tsc_clk;
> struct clk *adc_clk;
> + struct gpio_desc *xnur_gpio;
>
> - int xnur_gpio;
> int measure_delay_time;
> int pre_charge_time;
>
> @@ -105,6 +102,8 @@ static void imx6ul_adc_init(struct imx6ul_tsc *tsc)
> int adc_cfg;
> int timeout;
>
> + reinit_completion(&tsc->completion);
> +
> adc_cfg = readl(tsc->adc_regs + REG_ADC_CFG);
> adc_cfg |= ADC_12BIT_MODE | ADC_IPG_CLK;
> adc_cfg |= ADC_CLK_DIV_8 | ADC_SHORT_SAMPLE_MODE;
> @@ -196,17 +195,33 @@ static void imx6ul_tsc_init(struct imx6ul_tsc *tsc)
> imx6ul_tsc_set(tsc);
> }
>
> +static void imx6ul_tsc_disable(struct imx6ul_tsc *tsc)
> +{
> + int tsc_flow;
> + int adc_cfg;
> +
> + /* TSC controller enters to idle status */
> + tsc_flow = readl(tsc->tsc_regs + REG_TSC_FLOW_CONTROL);
> + tsc_flow |= TSC_DISABLE;
> + writel(tsc_flow, tsc->tsc_regs + REG_TSC_FLOW_CONTROL);
> +
> + /* ADC controller enters to stop mode */
> + adc_cfg = readl(tsc->adc_regs + REG_ADC_HC0);
> + adc_cfg |= ADC_CONV_DISABLE;
> + writel(adc_cfg, tsc->adc_regs + REG_ADC_HC0);
> +}
> +
> static irqreturn_t tsc_irq_fn(int irq, void *dev_id)
> {
> struct imx6ul_tsc *tsc = (struct imx6ul_tsc *)dev_id;
> int status;
> int value;
> int x, y;
> - int xnur;
> int debug_mode2;
> int state_machine;
> int start;
> unsigned long timeout;
> + bool touch;
>
> status = readl(tsc->tsc_regs + REG_TSC_INT_STATUS);
>
> @@ -235,8 +250,8 @@ static irqreturn_t tsc_irq_fn(int irq, void *dev_id)
> timeout = jiffies + HZ/500;
> do {
> if (time_after(jiffies, timeout)) {
> - xnur = 0;
> - goto touch_event;
> + touch = true;
> + goto report_touch;
> }
> usleep_range(200, 400);
> debug_mode2 = readl(tsc->tsc_regs +
> REG_TSC_DEBUG_MODE2);
> @@ -244,14 +259,15 @@ static irqreturn_t tsc_irq_fn(int irq, void *dev_id)
> } while (state_machine != DETECT_MODE);
> usleep_range(200, 400);
>
> - xnur = gpio_get_value(tsc->xnur_gpio);
> -touch_event:
> - if (xnur == 0) {
> + touch = gpiod_get_value_cansleep(tsc->xnur_gpio);
> +report_touch:
> + if (touch) {
> input_report_key(tsc->input, BTN_TOUCH, 1);
> input_report_abs(tsc->input, ABS_X, x);
> input_report_abs(tsc->input, ABS_Y, y);
> - } else
> + } else {
> input_report_key(tsc->input, BTN_TOUCH, 0);
> + }
>
> input_sync(tsc->input);
> }
> @@ -261,7 +277,7 @@ touch_event:
>
> static irqreturn_t adc_irq_fn(int irq, void *dev_id)
> {
> - struct imx6ul_tsc *tsc = (struct imx6ul_tsc *)dev_id;
> + struct imx6ul_tsc *tsc = dev_id;
> int coco;
> int value;
>
> @@ -274,70 +290,113 @@ static irqreturn_t adc_irq_fn(int irq, void
> *dev_id)
> return IRQ_HANDLED;
> }
>
> -static const struct of_device_id imx6ul_tsc_match[] = {
> - { .compatible = "fsl,imx6ul-tsc", },
> - { /* sentinel */ }
> -};
> -MODULE_DEVICE_TABLE(of, imx6ul_tsc_match);
> +static int imx6ul_tsc_open(struct input_dev *input_dev)
> +{
> + struct imx6ul_tsc *tsc = input_get_drvdata(input_dev);
> + int err;
> +
> + err = clk_prepare_enable(tsc->adc_clk);
> + if (err) {
> + dev_err(tsc->dev,
> + "Could not prepare or enable the adc clock: %d\n",
> + err);
> + return err;
> + }
> +
> + err = clk_prepare_enable(tsc->tsc_clk);
> + if (err) {
> + dev_err(tsc->dev,
> + "Could not prepare or enable the tsc clock: %d\n",
> + err);
> + clk_disable_unprepare(tsc->adc_clk);
> + return err;
> + }
> +
> + imx6ul_tsc_init(tsc);
> +
> + return 0;
> +}
> +
> +static void imx6ul_tsc_close(struct input_dev *input_dev)
> +{
> + struct imx6ul_tsc *tsc = input_get_drvdata(input_dev);
> +
> + imx6ul_tsc_disable(tsc);
> +
> + clk_disable_unprepare(tsc->tsc_clk);
> + clk_disable_unprepare(tsc->adc_clk);
> +}
>
> static int imx6ul_tsc_probe(struct platform_device *pdev)
> {
> + struct device_node *np = pdev->dev.of_node;
> struct imx6ul_tsc *tsc;
> + struct input_dev *input_dev;
> struct resource *tsc_mem;
> struct resource *adc_mem;
> - struct input_dev *input_dev;
> - struct device_node *np = pdev->dev.of_node;
> int err;
> int tsc_irq;
> int adc_irq;
>
> tsc = devm_kzalloc(&pdev->dev, sizeof(struct imx6ul_tsc),
> GFP_KERNEL);
> + if (!tsc)
> + return -ENOMEM;
> +
> input_dev = devm_input_allocate_device(&pdev->dev);
> + if (!input_dev)
> + return -ENOMEM;
>
> - tsc->dev = &pdev->dev;
> + input_dev->name = "iMX6UL TouchScreen Controller";
> + input_dev->id.bustype = BUS_HOST;
>
> - tsc->input = input_dev;
> - tsc->input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
> - tsc->input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
> - input_set_abs_params(tsc->input, ABS_X, 0, 0xFFF, 0, 0);
> - input_set_abs_params(tsc->input, ABS_Y, 0, 0xFFF, 0, 0);
> + input_dev->open = imx6ul_tsc_open;
> + input_dev->close = imx6ul_tsc_close;
>
> - tsc->input->name = "iMX6UL TouchScreen Controller";
> + input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
> + input_set_abs_params(input_dev, ABS_X, 0, 0xFFF, 0, 0);
> + input_set_abs_params(input_dev, ABS_Y, 0, 0xFFF, 0, 0);
>
> - tsc->xnur_gpio = of_get_named_gpio(np, "xnur-gpio", 0);
> - err = gpio_request_one(tsc->xnur_gpio, GPIOF_IN, "tsc_X-");
> - if (err) {
> - dev_err(&pdev->dev, "failed to request GPIO tsc_X-\n");
> + input_set_drvdata(input_dev, tsc);
> +
> + tsc->dev = &pdev->dev;
> + tsc->input = input_dev;
> + init_completion(&tsc->completion);
> +
> + tsc->xnur_gpio = devm_gpiod_get(&pdev->dev, "xnur-gpio", GPIOD_IN);
> + if (IS_ERR(tsc->xnur_gpio)) {
> + err = PTR_ERR(tsc->xnur_gpio);
> + dev_err(&pdev->dev,
> + "failed to request GPIO tsc_X- (xnur): %d\n", err);
> return err;
> }
>
> tsc_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> tsc->tsc_regs = devm_ioremap_resource(&pdev->dev, tsc_mem);
> if (IS_ERR(tsc->tsc_regs)) {
> - dev_err(&pdev->dev, "failed to remap tsc memory\n");
> err = PTR_ERR(tsc->tsc_regs);
> + dev_err(&pdev->dev, "failed to remap tsc memory: %d\n", err);
> return err;
> }
>
> adc_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> tsc->adc_regs = devm_ioremap_resource(&pdev->dev, adc_mem);
> if (IS_ERR(tsc->adc_regs)) {
> - dev_err(&pdev->dev, "failed to remap adc memory\n");
> err = PTR_ERR(tsc->adc_regs);
> + dev_err(&pdev->dev, "failed to remap adc memory: %d\n", err);
> return err;
> }
>
> tsc->tsc_clk = devm_clk_get(&pdev->dev, "tsc");
> if (IS_ERR(tsc->tsc_clk)) {
> - dev_err(&pdev->dev, "failed getting tsc clock\n");
> err = PTR_ERR(tsc->tsc_clk);
> + dev_err(&pdev->dev, "failed getting tsc clock: %d\n", err);
> return err;
> }
>
> tsc->adc_clk = devm_clk_get(&pdev->dev, "adc");
> if (IS_ERR(tsc->adc_clk)) {
> - dev_err(&pdev->dev, "failed getting adc clock\n");
> err = PTR_ERR(tsc->adc_clk);
> + dev_err(&pdev->dev, "failed getting adc clock: %d\n", err);
> return err;
> }
>
> @@ -354,111 +413,61 @@ static int imx6ul_tsc_probe(struct platform_device
> *pdev)
> }
>
> err = devm_request_threaded_irq(tsc->dev, tsc_irq,
> - NULL, tsc_irq_fn,
> - IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> + NULL, tsc_irq_fn, IRQF_ONESHOT,
> dev_name(&pdev->dev), tsc);
> - if (err < 0) {
> + if (err) {
> dev_err(&pdev->dev,
> - "failed requesting tsc irq %d\n",
> - tsc_irq);
> + "failed requesting tsc irq %di: %d\n",
> + tsc_irq, err);
> return err;
> }
>
> - err = devm_request_irq(tsc->dev, adc_irq,
> - adc_irq_fn, 0,
> + err = devm_request_irq(tsc->dev, adc_irq, adc_irq_fn, 0,
> dev_name(&pdev->dev), tsc);
> - if (err < 0) {
> + if (err) {
> dev_err(&pdev->dev,
> - "failed requesting adc irq %d\n",
> - adc_irq);
> + "failed requesting adc irq %d: %d\n",
> + adc_irq, err);
> return err;
> }
>
> err = of_property_read_u32(np, "measure-delay-time",
> - &tsc->measure_delay_time);
> + &tsc->measure_delay_time);
> if (err)
> tsc->measure_delay_time = 0xffff;
>
> err = of_property_read_u32(np, "pre-charge-time",
> - &tsc->pre_charge_time);
> + &tsc->pre_charge_time);
> if (err)
> tsc->pre_charge_time = 0xfff;
>
> - init_completion(&tsc->completion);
> -
> - err = clk_prepare_enable(tsc->adc_clk);
> + err = input_register_device(tsc->input);
> if (err) {
> dev_err(&pdev->dev,
> - "Could not prepare or enable the adc clock.\n");
> + "failed to register input device: %d\n", err);
> return err;
> }
>
> - err = clk_prepare_enable(tsc->tsc_clk);
> - if (err) {
> - dev_err(&pdev->dev,
> - "Could not prepare or enable the tsc clock.\n");
> - goto error_tsc_clk_enable;
> - }
> -
> - err = input_register_device(tsc->input);
> - if (err < 0) {
> - dev_err(&pdev->dev, "failed to register input device\n");
> - err = -EIO;
> - goto err_input_register;
> - }
> -
> - imx6ul_tsc_init(tsc);
> -
> platform_set_drvdata(pdev, tsc);
> return 0;
> -
> -err_input_register:
> - clk_disable_unprepare(tsc->tsc_clk);
> -error_tsc_clk_enable:
> - clk_disable_unprepare(tsc->adc_clk);
> -
> - return err;
> -}
> -
> -static void imx6ul_tsc_disable(struct imx6ul_tsc *tsc)
> -{
> - int tsc_flow;
> - int adc_cfg;
> -
> - /* TSC controller enters to idle status */
> - tsc_flow = readl(tsc->tsc_regs + REG_TSC_FLOW_CONTROL);
> - tsc_flow |= TSC_DISABLE;
> - writel(tsc_flow, tsc->tsc_regs + REG_TSC_FLOW_CONTROL);
> -
> - /* ADC controller enters to stop mode */
> - adc_cfg = readl(tsc->adc_regs + REG_ADC_HC0);
> - adc_cfg |= ADC_CONV_DISABLE;
> - writel(adc_cfg, tsc->adc_regs + REG_ADC_HC0);
> -}
> -
> -static int imx6ul_tsc_remove(struct platform_device *pdev)
> -{
> - struct imx6ul_tsc *tsc = platform_get_drvdata(pdev);
> -
> - imx6ul_tsc_disable(tsc);
> -
> - clk_disable_unprepare(tsc->tsc_clk);
> - clk_disable_unprepare(tsc->adc_clk);
> - input_unregister_device(tsc->input);
> - kfree(tsc);
> -
> - return 0;
> }
>
> static int __maybe_unused imx6ul_tsc_suspend(struct device *dev)
> {
> struct platform_device *pdev = to_platform_device(dev);
> struct imx6ul_tsc *tsc = platform_get_drvdata(pdev);
> + struct input_dev *input_dev = tsc->input;
>
> - imx6ul_tsc_disable(tsc);
> + mutex_lock(&input_dev->mutex);
>
> - clk_disable_unprepare(tsc->tsc_clk);
> - clk_disable_unprepare(tsc->adc_clk);
> + if (input_dev->users) {
> + imx6ul_tsc_disable(tsc);
> +
> + clk_disable_unprepare(tsc->tsc_clk);
> + clk_disable_unprepare(tsc->adc_clk);
> + }
> +
> + mutex_unlock(&input_dev->mutex);
>
> return 0;
> }
> @@ -467,35 +476,46 @@ static int __maybe_unused imx6ul_tsc_resume(struct
> device *dev)
> {
> struct platform_device *pdev = to_platform_device(dev);
> struct imx6ul_tsc *tsc = platform_get_drvdata(pdev);
> - int err;
> + struct input_dev *input_dev = tsc->input;
> + int retval = 0;
>
> - err = clk_prepare_enable(tsc->adc_clk);
> - if (err)
> - return err;
> + mutex_lock(&input_dev->mutex);
>
> - err = clk_prepare_enable(tsc->tsc_clk);
> - if (err) {
> - clk_disable_unprepare(tsc->adc_clk);
> - return err;
> + if (input_dev->users) {
> + retval = clk_prepare_enable(tsc->adc_clk);
> + if (retval)
> + goto out;
> +
> + retval = clk_prepare_enable(tsc->tsc_clk);
> + if (retval) {
> + clk_disable_unprepare(tsc->adc_clk);
> + goto out;
> + }
> +
> + imx6ul_tsc_init(tsc);
> }
>
> - imx6ul_tsc_init(tsc);
> - return 0;
> +out:
> + mutex_unlock(&input_dev->mutex);
> + return retval;
> }
>
> static SIMPLE_DEV_PM_OPS(imx6ul_tsc_pm_ops,
> - imx6ul_tsc_suspend,
> - imx6ul_tsc_resume);
> + imx6ul_tsc_suspend, imx6ul_tsc_resume);
> +
> +static const struct of_device_id imx6ul_tsc_match[] = {
> + { .compatible = "fsl,imx6ul-tsc", },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, imx6ul_tsc_match);
>
> static struct platform_driver imx6ul_tsc_driver = {
> .driver = {
> .name = "imx6ul-tsc",
> - .owner = THIS_MODULE,
> .of_match_table = imx6ul_tsc_match,
> .pm = &imx6ul_tsc_pm_ops,
> },
> .probe = imx6ul_tsc_probe,
> - .remove = imx6ul_tsc_remove,
> };
> module_platform_driver(imx6ul_tsc_driver);
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists