| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAJKOXPeEm8exg_UG0tDnaEGO40ejBKZ-ok=bKbVrwYvXnDaMdg@mail.gmail.com>
Date: Mon, 24 Aug 2015 09:43:32 +0900
From: Krzysztof Kozlowski <k.kozlowski@...sung.com>
To: Rob Herring <robherring2@...il.com>,
Yakir Yang <ykk@...k-chips.com>
Cc: Heiko Stuebner <heiko@...ech.de>, Sean Paul <seanpaul@...gle.com>,
Takashi Iwai <tiwai@...e.de>,
dri-devel <dri-devel@...ts.freedesktop.org>,
Andrzej Hajda <a.hajda@...sung.com>,
Gustavo Padovan <gustavo.padovan@...labora.co.uk>,
"linux-samsung-soc@...r.kernel.org"
<linux-samsung-soc@...r.kernel.org>,
Vincent Palatin <vpalatin@...omium.org>,
Kishon Vijay Abraham I <kishon@...com>,
linux-rockchip@...ts.infradead.org,
Russell King <rmk+kernel@....linux.org.uk>,
Thierry Reding <treding@...dia.com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Pawel Moll <pawel.moll@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
David Airlie <airlied@...ux.ie>,
Doug Anderson <dianders@...gle.com>,
Inki Dae <inki.dae@...sung.com>,
Ajay kumar <ajaynumb@...il.com>,
Rob Herring <robh+dt@...nel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
Mark Yao <mark.yao@...k-chips.com>,
Fabio Estevam <fabio.estevam@...escale.com>,
Jingoo Han <jingoohan1@...il.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Kyungmin Park <kyungmin.park@...sung.com>,
Daniel Kurtz <djkurtz@...gle.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Kumar Gala <galak@...eaurora.org>,
Joe Perches <joe@...ches.com>,
Andy Yan <andy.yan@...k-chips.com>
Subject: Re: [PATCH v3 06/14] Documentation: drm/bridge: add document for analogix_dp
2015-08-24 8:23 GMT+09:00 Rob Herring <robherring2@...il.com>:
> On Wed, Aug 19, 2015 at 9:50 AM, Yakir Yang <ykk@...k-chips.com> wrote:
>> Analogix dp driver is split from exynos dp driver, so we just
>> make an copy of exynos_dp.txt, and then simplify exynos_dp.txt
>>
>> Beside update some exynos dtsi file with the latest change
>> according to the devicetree binding documents.
>
> You can't just change the exynos bindings and break compatibility. Is
> there some agreement with exynos folks to do this?
No, there is no agreement. This wasn't even sent to Exynos maintainers.
Additionally the patchset did not look interesting to me because of
misleading subject - Documentation instead of "ARM: dts:".
Yakir, please:
1. Provide backward compatibility. Mark old properties as deprecated
but still support them.
2. Separate all DTS changes to a separate patch, unless bisectability
would be hurt. Anyway you should prepare it in a such way that
separation would be possible without breaking bisectability.
3. Use proper subject for the patch changing DTS. This is not
documentation change!
4. Please use script get_maintainers to obtain list of valid
maintainers and CC-them with at least cover letter and patches
requiring their attention.
Best regards,
Krzysztof
>
>
>> Signed-off-by: Yakir Yang <ykk@...k-chips.com>
>> ---
>> Changes in v3:
>> - Take Heiko suggest, add devicetree binding documents.
>> - Take Thierry Reding suggest, remove sync pol & colorimetry properies
>> from the new analogix dp driver devicetree binding.
>> - Update the exist exynos dtsi file with the latest DP DT properies.
>>
>> Changes in v2: None
>>
>> .../devicetree/bindings/drm/bridge/analogix_dp.txt | 70 ++++++++++++++++++++++
>> .../devicetree/bindings/video/exynos_dp.txt | 50 ++++++----------
>> arch/arm/boot/dts/exynos5250-arndale.dts | 10 ++--
>> arch/arm/boot/dts/exynos5250-smdk5250.dts | 10 ++--
>> arch/arm/boot/dts/exynos5250-snow.dts | 12 ++--
>> arch/arm/boot/dts/exynos5250-spring.dts | 12 ++--
>> arch/arm/boot/dts/exynos5420-peach-pit.dts | 12 ++--
>> arch/arm/boot/dts/exynos5420-smdk5420.dts | 10 ++--
>> arch/arm/boot/dts/exynos5800-peach-pi.dts | 12 ++--
>> 9 files changed, 119 insertions(+), 79 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
>>
>> diff --git a/Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
>> new file mode 100644
>> index 0000000..6127018
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
>> @@ -0,0 +1,70 @@
>> +Analogix Display Port bridge bindings
>> +
>> +Required properties for dp-controller:
>> + -compatible:
>> + platform specific such as:
>> + * "samsung,exynos5-dp"
>> + * "rockchip,rk3288-dp"
>> + -reg:
>> + physical base address of the controller and length
>> + of memory mapped region.
>> + -interrupts:
>> + interrupt combiner values.
>> + -clocks:
>> + from common clock binding: handle to dp clock.
>> + -clock-names:
>> + from common clock binding: Shall be "dp".
>> + -interrupt-parent:
>> + phandle to Interrupt combiner node.
>> + -phys:
>> + from general PHY binding: the phandle for the PHY device.
>> + -phy-names:
>> + from general PHY binding: Should be "dp".
>> + -analogix,color-space:
>> + input video data format.
>> + COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
>> + -analogix,color-depth:
>> + number of bits per colour component.
>> + COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3
>
> This seems pretty generic. Just use 6, 8, 10, or 12 for values. And
> drop the vendor prefix.
>
>> + -analogix,link-rate:
>> + max link rate supported by the eDP controller.
>> + LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A,
>> + LINK_RATE_5_40GBPS = 0x14
>
> Same here. I'd rather see something like "link-rate-mbps" and use the
> actual rate.
>
>> + -analogix,lane-count:
>> + max number of lanes supported by the eDP contoller.
>> + LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
>
> And drop the vendor prefix here.
>
>> + -port@[X]: SoC specific port nodes with endpoint definitions as defined
>> + in Documentation/devicetree/bindings/media/video-interfaces.txt,
>> + please refer to the SoC specific binding document:
>> + * Documentation/devicetree/bindings/video/exynos_dp.txt
>> + * Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
>> +
>> +Optional properties for dp-controller:
>> + -analogix,hpd-gpio:
>> + Hotplug detect GPIO.
>> + Indicates which GPIO should be used for hotplug
>> + detection
>
> We should align with "hpd-gpios" used by HDMI connector binding. Or do
> we need a DP connector binding that this should be defined in?
> Probably so.
>
> The DRM related bindings are such a cluster f*ck with everyone picking
> their own way to do things. Just grep hpd in bindings for starters.
> That is just the tip.
>
>> + -video interfaces: Device node can contain video interface port
>> + nodes according to [1].
>
> Isn't this the same as ports above? How are they optional? 0 ports
> would be pretty useless.
>
>> +
>> +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
>> +-------------------------------------------------------------------------------
>> +
>> +Example:
>> +
>> + dp-controller {
>> + compatible = "samsung,exynos5-dp";
>> + reg = <0x145b0000 0x10000>;
>> + interrupts = <10 3>;
>> + interrupt-parent = <&combiner>;
>> + clocks = <&clock 342>;
>> + clock-names = "dp";
>> +
>> + phys = <&dp_phy>;
>> + phy-names = "dp";
>> +
>> + analogix,color-space = <0>;
>> + analogix,color-depth = <1>;
>> + analogix,link-rate = <0x0a>;
>> + analogix,lane-count = <4>;
>> + };
>> diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
>> index 7a3a9cd..177506f 100644
>> --- a/Documentation/devicetree/bindings/video/exynos_dp.txt
>> +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
>> @@ -31,28 +31,10 @@ Required properties for dp-controller:
>> from general PHY binding: the phandle for the PHY device.
>> -phy-names:
>> from general PHY binding: Should be "dp".
>> - -samsung,color-space:
>> - input video data format.
>> - COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
>> - -samsung,dynamic-range:
>> - dynamic range for input video data.
>> - VESA = 0, CEA = 1
>> - -samsung,ycbcr-coeff:
>> - YCbCr co-efficients for input video.
>> - COLOR_YCBCR601 = 0, COLOR_YCBCR709 = 1
>> - -samsung,color-depth:
>> - number of bits per colour component.
>> - COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3
>> - -samsung,link-rate:
>> - link rate supported by the panel.
>> - LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A
>> - -samsung,lane-count:
>> - number of lanes supported by the panel.
>> - LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
>> - - display-timings: timings for the connected panel as described by
>> - Documentation/devicetree/bindings/video/display-timing.txt
>>
>> Optional properties for dp-controller:
>> + - display-timings: timings for the connected panel as described by
>> + Documentation/devicetree/bindings/video/display-timing.txt
>> -interlaced:
>> interlace scan mode.
>> Progressive if defined, Interlaced if not defined
>> @@ -62,14 +44,18 @@ Optional properties for dp-controller:
>> -hsync-active-high:
>> HSYNC polarity configuration.
>> High if defined, Low if not defined
>> - -samsung,hpd-gpio:
>> - Hotplug detect GPIO.
>> - Indicates which GPIO should be used for hotplug
>> - detection
>> - -video interfaces: Device node can contain video interface port
>> - nodes according to [1].
>>
>> -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
>> +For the below properties, please refer to Analogix DP binding document:
>> + * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
>> + -phys (required)
>> + -phy-names (required)
>> + -analogix,color-space (required)
>> + -analogix,color-depth (required)
>> + -analogix,link-rate (required)
>> + -analogix,lane-count (required)
>> + -analogix,hpd-gpio (optional)
>> + -video interfaces (optional)
>> +-------------------------------------------------------------------------------
>>
>> Example:
>>
>> @@ -88,12 +74,10 @@ SOC specific portion:
>>
>> Board Specific portion:
>> dp-controller {
>> - samsung,color-space = <0>;
>> - samsung,dynamic-range = <0>;
>> - samsung,ycbcr-coeff = <0>;
>> - samsung,color-depth = <1>;
>> - samsung,link-rate = <0x0a>;
>> - samsung,lane-count = <4>;
>> + analogix,color-space = <0>;
>> + analogix,color-depth = <1>;
>> + analogix,link-rate = <0x0a>;
>> + analogix,lane-count = <4>;
>>
>> display-timings {
>> native-mode = <&lcd_timing>;
>> diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
>> index 7e728a1..e48798d 100644
>> --- a/arch/arm/boot/dts/exynos5250-arndale.dts
>> +++ b/arch/arm/boot/dts/exynos5250-arndale.dts
>> @@ -119,12 +119,10 @@
>>
>> &dp {
>> status = "okay";
>> - samsung,color-space = <0>;
>> - samsung,dynamic-range = <0>;
>> - samsung,ycbcr-coeff = <0>;
>> - samsung,color-depth = <1>;
>> - samsung,link-rate = <0x0a>;
>> - samsung,lane-count = <4>;
>> + analogix,color-space = <0>;
>> + analogix,color-depth = <1>;
>> + analogix,link-rate = <0x0a>;
>> + analogix,lane-count = <4>;
>> };
>>
>> &fimd {
>> diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
>> index 4fe186d..b8c6b8b 100644
>> --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
>> +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
>> @@ -75,12 +75,10 @@
>> };
>>
>> &dp {
>> - samsung,color-space = <0>;
>> - samsung,dynamic-range = <0>;
>> - samsung,ycbcr-coeff = <0>;
>> - samsung,color-depth = <1>;
>> - samsung,link-rate = <0x0a>;
>> - samsung,lane-count = <4>;
>> + analogix,color-space = <0>;
>> + analogix,color-depth = <1>;
>> + analogix,link-rate = <0x0a>;
>> + analogix,lane-count = <4>;
>>
>> pinctrl-names = "default";
>> pinctrl-0 = <&dp_hpd>;
>> diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
>> index b7f4122..9ce2b89 100644
>> --- a/arch/arm/boot/dts/exynos5250-snow.dts
>> +++ b/arch/arm/boot/dts/exynos5250-snow.dts
>> @@ -239,13 +239,11 @@
>> status = "okay";
>> pinctrl-names = "default";
>> pinctrl-0 = <&dp_hpd>;
>> - samsung,color-space = <0>;
>> - samsung,dynamic-range = <0>;
>> - samsung,ycbcr-coeff = <0>;
>> - samsung,color-depth = <1>;
>> - samsung,link-rate = <0x0a>;
>> - samsung,lane-count = <2>;
>> - samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
>> + analogix,color-space = <0>;
>> + analogix,color-depth = <1>;
>> + analogix,link-rate = <0x0a>;
>> + analogix,lane-count = <2>;
>> + analogix,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
>>
>> ports {
>> port@0 {
>> diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
>> index d03f9b8..9288ae6 100644
>> --- a/arch/arm/boot/dts/exynos5250-spring.dts
>> +++ b/arch/arm/boot/dts/exynos5250-spring.dts
>> @@ -69,13 +69,11 @@
>> status = "okay";
>> pinctrl-names = "default";
>> pinctrl-0 = <&dp_hpd_gpio>;
>> - samsung,color-space = <0>;
>> - samsung,dynamic-range = <0>;
>> - samsung,ycbcr-coeff = <0>;
>> - samsung,color-depth = <1>;
>> - samsung,link-rate = <0x0a>;
>> - samsung,lane-count = <1>;
>> - samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
>> + analogix,color-space = <0>;
>> + analogix,color-depth = <1>;
>> + analogix,link-rate = <0x0a>;
>> + analogix,lane-count = <1>;
>> + analogix,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
>> };
>>
>> &ehci {
>> diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
>> index 8f4d76c..695a380 100644
>> --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
>> +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
>> @@ -147,13 +147,11 @@
>> status = "okay";
>> pinctrl-names = "default";
>> pinctrl-0 = <&dp_hpd_gpio>;
>> - samsung,color-space = <0>;
>> - samsung,dynamic-range = <0>;
>> - samsung,ycbcr-coeff = <0>;
>> - samsung,color-depth = <1>;
>> - samsung,link-rate = <0x06>;
>> - samsung,lane-count = <2>;
>> - samsung,hpd-gpio = <&gpx2 6 0>;
>> + analogix,color-space = <0>;
>> + analogix,color-depth = <1>;
>> + analogix,link-rate = <0x06>;
>> + analogix,lane-count = <2>;
>> + analogix,hpd-gpio = <&gpx2 6 0>;
>>
>> ports {
>> port@0 {
>> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> index 98871f9..fd46714 100644
>> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> @@ -91,12 +91,10 @@
>> &dp {
>> pinctrl-names = "default";
>> pinctrl-0 = <&dp_hpd>;
>> - samsung,color-space = <0>;
>> - samsung,dynamic-range = <0>;
>> - samsung,ycbcr-coeff = <0>;
>> - samsung,color-depth = <1>;
>> - samsung,link-rate = <0x0a>;
>> - samsung,lane-count = <4>;
>> + analogix,color-space = <0>;
>> + analogix,color-depth = <1>;
>> + analogix,link-rate = <0x0a>;
>> + analogix,lane-count = <4>;
>> status = "okay";
>> };
>>
>> diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
>> index 7d5b386..54b4c63 100644
>> --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
>> +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
>> @@ -141,13 +141,11 @@
>> status = "okay";
>> pinctrl-names = "default";
>> pinctrl-0 = <&dp_hpd_gpio>;
>> - samsung,color-space = <0>;
>> - samsung,dynamic-range = <0>;
>> - samsung,ycbcr-coeff = <0>;
>> - samsung,color-depth = <1>;
>> - samsung,link-rate = <0x0a>;
>> - samsung,lane-count = <2>;
>> - samsung,hpd-gpio = <&gpx2 6 0>;
>> + analogix,color-space = <0>;
>> + analogix,color-depth = <1>;
>> + analogix,link-rate = <0x0a>;
>> + analogix,lane-count = <2>;
>> + analogix,hpd-gpio = <&gpx2 6 0>;
>> panel = <&panel>;
>> };
>>
>> --
>> 1.9.1
>>
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@...ts.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists