| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPDyKFqQ7heMVnXpe2pWZ=TzP1GWqJ-UzZb_nBoB_Ph7xZiCyA@mail.gmail.com>
Date: Tue, 29 Sep 2015 12:30:57 +0200
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Robert Jarzmik <robert.jarzmik@...e.fr>
Cc: linux-mmc <linux-mmc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Petr Cvek <petr.cvek@....cz>
Subject: Re: [PATCH v3] mmc: pxamci: fix card detect with slot-gpio API
On 26 September 2015 at 21:41, Robert Jarzmik <robert.jarzmik@...e.fr> wrote:
> Move pxamci to mmc slot-gpio API to fix interrupt request.
>
> It fixes the case where the card detection is on a gpio expander, on I2C
> for example on zylonite board. In this case, the card detect netsted
> interrupt is called from a threaded interrupt. The request_irq() fails,
> because a hard irq cannot be a nested interrupt from a threaded
> interrupt (set __setup_irq()).
>
> This was tested on zylonite and mioa701 boards.
>
> Signed-off-by: Robert Jarzmik <robert.jarzmik@...e.fr>
> Cc: Petr Cvek <petr.cvek@....cz>
Thanks, applied for fixes!
Kind regards
Uffe
> ---
> Since v1: trade threaded interrupt for slot-gpio API
> Since v2: remove gpio_free() calls
> ---
> drivers/mmc/host/pxamci.c | 66 ++++++++++++++++-------------------------------
> 1 file changed, 22 insertions(+), 44 deletions(-)
>
> diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
> index 1420f29628c7..8cadd74e8407 100644
> --- a/drivers/mmc/host/pxamci.c
> +++ b/drivers/mmc/host/pxamci.c
> @@ -28,6 +28,7 @@
> #include <linux/clk.h>
> #include <linux/err.h>
> #include <linux/mmc/host.h>
> +#include <linux/mmc/slot-gpio.h>
> #include <linux/io.h>
> #include <linux/regulator/consumer.h>
> #include <linux/gpio.h>
> @@ -454,12 +455,8 @@ static int pxamci_get_ro(struct mmc_host *mmc)
> {
> struct pxamci_host *host = mmc_priv(mmc);
>
> - if (host->pdata && gpio_is_valid(host->pdata->gpio_card_ro)) {
> - if (host->pdata->gpio_card_ro_invert)
> - return !gpio_get_value(host->pdata->gpio_card_ro);
> - else
> - return gpio_get_value(host->pdata->gpio_card_ro);
> - }
> + if (host->pdata && gpio_is_valid(host->pdata->gpio_card_ro))
> + return mmc_gpio_get_ro(mmc);
> if (host->pdata && host->pdata->get_ro)
> return !!host->pdata->get_ro(mmc_dev(mmc));
> /*
> @@ -551,6 +548,7 @@ static void pxamci_enable_sdio_irq(struct mmc_host *host, int enable)
>
> static const struct mmc_host_ops pxamci_ops = {
> .request = pxamci_request,
> + .get_cd = mmc_gpio_get_cd,
> .get_ro = pxamci_get_ro,
> .set_ios = pxamci_set_ios,
> .enable_sdio_irq = pxamci_enable_sdio_irq,
> @@ -790,37 +788,31 @@ static int pxamci_probe(struct platform_device *pdev)
> gpio_power = host->pdata->gpio_power;
> }
> if (gpio_is_valid(gpio_power)) {
> - ret = gpio_request(gpio_power, "mmc card power");
> + ret = devm_gpio_request(&pdev->dev, gpio_power,
> + "mmc card power");
> if (ret) {
> - dev_err(&pdev->dev, "Failed requesting gpio_power %d\n", gpio_power);
> + dev_err(&pdev->dev, "Failed requesting gpio_power %d\n",
> + gpio_power);
> goto out;
> }
> gpio_direction_output(gpio_power,
> host->pdata->gpio_power_invert);
> }
> - if (gpio_is_valid(gpio_ro)) {
> - ret = gpio_request(gpio_ro, "mmc card read only");
> - if (ret) {
> - dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_ro);
> - goto err_gpio_ro;
> - }
> - gpio_direction_input(gpio_ro);
> + if (gpio_is_valid(gpio_ro))
> + ret = mmc_gpio_request_ro(mmc, gpio_ro);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_ro);
> + goto out;
> + } else {
> + mmc->caps |= host->pdata->gpio_card_ro_invert ?
> + MMC_CAP2_RO_ACTIVE_HIGH : 0;
> }
> - if (gpio_is_valid(gpio_cd)) {
> - ret = gpio_request(gpio_cd, "mmc card detect");
> - if (ret) {
> - dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_cd);
> - goto err_gpio_cd;
> - }
> - gpio_direction_input(gpio_cd);
>
> - ret = request_irq(gpio_to_irq(gpio_cd), pxamci_detect_irq,
> - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
> - "mmc card detect", mmc);
> - if (ret) {
> - dev_err(&pdev->dev, "failed to request card detect IRQ\n");
> - goto err_request_irq;
> - }
> + if (gpio_is_valid(gpio_cd))
> + ret = mmc_gpio_request_cd(mmc, gpio_cd, 0);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_cd);
> + goto out;
> }
>
> if (host->pdata && host->pdata->init)
> @@ -835,13 +827,7 @@ static int pxamci_probe(struct platform_device *pdev)
>
> return 0;
>
> -err_request_irq:
> - gpio_free(gpio_cd);
> -err_gpio_cd:
> - gpio_free(gpio_ro);
> -err_gpio_ro:
> - gpio_free(gpio_power);
> - out:
> +out:
> if (host) {
> if (host->dma_chan_rx)
> dma_release_channel(host->dma_chan_rx);
> @@ -873,14 +859,6 @@ static int pxamci_remove(struct platform_device *pdev)
> gpio_ro = host->pdata->gpio_card_ro;
> gpio_power = host->pdata->gpio_power;
> }
> - if (gpio_is_valid(gpio_cd)) {
> - free_irq(gpio_to_irq(gpio_cd), mmc);
> - gpio_free(gpio_cd);
> - }
> - if (gpio_is_valid(gpio_ro))
> - gpio_free(gpio_ro);
> - if (gpio_is_valid(gpio_power))
> - gpio_free(gpio_power);
> if (host->vcc)
> regulator_put(host->vcc);
>
> --
> 2.1.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists