[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <2E89032DDAA8B9408CB92943514A0337D46082F3@SW-EX-MBX01.diasemi.com>
Date: Mon, 5 Oct 2015 22:24:37 +0000
From: "Opensource [Adam Thomson]" <Adam.Thomson.Opensource@...semi.com>
To: Mark Brown <broonie@...nel.org>,
"Opensource [Adam Thomson]" <Adam.Thomson.Opensource@...semi.com>
CC: Liam Girdwood <lgirdwood@...il.com>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
"alsa-devel@...a-project.org" <alsa-devel@...a-project.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"Support Opensource" <Support.Opensource@...semi.com>
Subject: RE: [PATCH 1/2] ASoC: da7213: Add DT support to codec driver
On October 05, 2015 16:56, Mark Brown wrote:
> On Mon, Oct 05, 2015 at 04:40:18PM +0100, Adam Thomson wrote:
>
> > This patch adds support for DT bindings in the codec driver.
> > As part of this support, the mclk data can now be provided and
> > used to control the mclk during codec operation.
>
> Please split out the new MCLK configuration into a separate patch which
> describes what that configuration is, it's much easier to review that
> way. Otherwise there's a couple of minor issues here but nothing too
> critical.
Ok, no problem. Will do.
>
> > case SND_SOC_BIAS_STANDBY:
> > if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) {
> > + /* MCLK */
> > + clk_prepare_enable(da7213->mclk);
> > +
>
> This doesn't check the return value.
Yep, will update.
>
> > .driver = {
> > .name = "da7213",
> > + .of_match_table = da7213_of_match,
>
> Please use of_match_ptr() here.
Ok, didn't know about that. Will update.
Powered by blists - more mailing lists