linux-kernel - Re: [PATCH 2/8] mmc: sdhci-pxav3: disable clock inversion for HS MMC cards

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <87fv1o9hul.fsf@free-electrons.com>
Date:	Tue, 06 Oct 2015 16:44:50 +0200
From:	Gregory CLEMENT <gregory.clement@...e-electrons.com>
To:	Marcin Wojtas <mw@...ihalf.com>
Cc:	linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	linux-mmc@...r.kernel.org, ulf.hansson@...aro.org,
	sebastian.hesselbarth@...il.com, andrew@...n.ch,
	jason@...edaemon.net, thomas.petazzoni@...e-electrons.com,
	nadavh@...vell.com, alior@...vell.com, tawfik@...vell.com,
	jaz@...ihalf.com, <stable@...r.kernel.org>
Subject: Re: [PATCH 2/8] mmc: sdhci-pxav3: disable clock inversion for HS MMC cards

Hi Marcin,
 
 On mar., oct. 06 2015, Marcin Wojtas <mw@...ihalf.com> wrote:

> From: Nadav Haklai <nadavh@...vell.com>
>
> According to 'FE-2946959' erratum the clock inversion option is
> needed to support slow frequencies when the card input hold time
> requirement is high. This setting is not required for high speed
> MMC and might cause timing violation.
>
> Signed-off-by: Nadav Haklai <nadavh@...vell.com>
> Cc: <stable@...r.kernel.org> # v4.2

Seems OK too.

Reviewed-by: Gregory CLEMENT <gregory.clement@...e-electrons.com>

Thanks,

Gregory
> ---
>  drivers/mmc/host/sdhci-pxav3.c | 3 +++
>  1 file changed, 3 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
> index 976cddd..89a9e49 100644
> --- a/drivers/mmc/host/sdhci-pxav3.c
> +++ b/drivers/mmc/host/sdhci-pxav3.c
> @@ -291,6 +291,9 @@ static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
>  		    uhs == MMC_TIMING_UHS_DDR50) {
>  			reg_val &= ~SDIO3_CONF_CLK_INV;
>  			reg_val |= SDIO3_CONF_SD_FB_CLK;
> +		} else if (uhs == MMC_TIMING_MMC_HS) {
> +			reg_val &= ~SDIO3_CONF_CLK_INV;
> +			reg_val &= ~SDIO3_CONF_SD_FB_CLK;
>  		} else {
>  			reg_val |= SDIO3_CONF_CLK_INV;
>  			reg_val &= ~SDIO3_CONF_SD_FB_CLK;
> -- 
> 1.8.3.1
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/