lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <561CE8CB.9010102@samsung.com>
Date:	Tue, 13 Oct 2015 16:49:39 +0530
From:	Alim Akhtar <alim.akhtar@...sung.com>
To:	Arnd Bergmann <arnd@...db.de>
Cc:	linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org,
	JBottomley@...n.com, vinholikatti@...il.com,
	amit.daniel@...sung.com, essuuj@...il.com,
	devicetree@...r.kernel.org
Subject: Re: [PATCH v3 12/13] scsi: ufs-exynos: add UFS host support for Exynos
 SoCs

Hi Arnd,

On 10/01/2015 05:42 PM, Arnd Bergmann wrote:
> On Thursday 01 October 2015 13:39:29 Alim Akhtar wrote:
>
>> +static int exynos7_ufs_drv_init(struct device *dev, struct exynos_ufs *ufs)
>> +{
>> +	int ret;
>> +	const char *const clks[] = {
>> +		"mout_sclk_combo_phy_embedded",
>> +		"top_sclk_phy_fsys1_26m",
>> +	};
>> +
>
> These clocks are neither in the binding nor in the example.
>
ok, I am cleaning this a bit, this will come from DT.
>> +struct exynos_ufs_drv_data exynos_ufs_drvs[] = {
>> +{
>> +	.compatible		= "samsung,exynos7-ufs",
>> +	.uic_attr		= &exynos7_uic_attr,
>> +	.quirks			= UFSHCI_QUIRK_BYTE_ALIGN_UTRD |
>> +				  UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR |
>> +				  UFSHCI_QUIRK_BROKEN_HCE |
>> +				  UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR,
>> +	.opts			= EXYNOS_UFS_OPT_HAS_APB_CLK_CTRL |
>> +				  EXYNOS_UFS_OPT_BROKEN_AUTO_CLK_CTRL |
>> +				  EXYNOS_UFS_OPT_BROKEN_RX_SEL_IDX,
>> +	.drv_init		= exynos7_ufs_drv_init,
>> +	.pre_link		= exynos7_ufs_pre_link,
>> +	.post_link		= exynos7_ufs_post_link,
>> +	.pre_pwr_change		= exynos7_ufs_pre_pwr_change,
>> +	.post_pwr_change	= exynos7_ufs_post_pwr_change,
>> +}, {
>> +}, };
>
> The indentation is a bit unusual  here.
>
hmm..ok will change
>> diff --git a/drivers/scsi/ufs/ufs-exynos-hw.h b/drivers/scsi/ufs/ufs-exynos-hw.h
>> new file mode 100644
>> index 0000000..8464ec8
>> --- /dev/null
>> +++ b/drivers/scsi/ufs/ufs-exynos-hw.h
>> @@ -0,0 +1,43 @@
>> +/*
>> + * UFS Host Controller driver for Exynos specific extensions
>> + *
>> + * Copyright (C) 2014-2015 Samsung Electronics Co., Ltd.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + */
>> +
>> +#ifndef _UFS_EXYNOS_HW_H_
>> +#define _UFS_EXYNOS_HW_H_
>> +
>> +#include "ufs-exynos.h"
>> +#include "unipro.h"
>> +
>> +static struct exynos_ufs_uic_attr exynos7_uic_attr = {
>
> You cannot put 'static' variables into a header file.
>
will remove
>> +
>> +/**
>> + * exynos_ufs_auto_ctrl_hcc - HCI core clock control by h/w
>> + * Control should be disabled in the below cases
>> + * - Before host controller S/W reset
>> + * - Access to UFS protector's register
>> + */
>> +static void exynos_ufs_auto_ctrl_hcc(struct exynos_ufs *ufs, bool en)
>> +{
>> +	u32 misc = hci_readl(ufs, HCI_MISC);
>> +
>> +	if (en)
>> +		hci_writel(ufs, misc | HCI_CORECLK_CTRL_EN, HCI_MISC);
>> +	else
>> +		hci_writel(ufs, misc & ~HCI_CORECLK_CTRL_EN, HCI_MISC);
>
> Does this need a spinlock to ensure the change is done atomically?
>
will check and if needed will add,
>> +}
>> +
>> +static void exynos_ufs_ctrl_clkstop(struct exynos_ufs *ufs, bool en)
>> +{
>> +	u32 ctrl = hci_readl(ufs, HCI_CLKSTOP_CTRL);
>> +	u32 misc = hci_readl(ufs, HCI_MISC);
>> +
>> +	if (en) {
>> +		hci_writel(ufs, misc | CLK_CTRL_EN_MASK, HCI_MISC);
>> +		hci_writel(ufs, ctrl | CLK_STOP_MASK, HCI_CLKSTOP_CTRL);
>> +	} else {
>> +		hci_writel(ufs, ctrl & ~CLK_STOP_MASK, HCI_CLKSTOP_CTRL);
>> +		hci_writel(ufs, misc & ~CLK_CTRL_EN_MASK, HCI_MISC);
>> +	}
>
> same here.
>
>> +
>> +static int exynos_ufs_get_clk_info(struct exynos_ufs *ufs)
>> +{
>> +	struct ufs_hba *hba = ufs->hba;
>> +	struct list_head *head = &hba->clk_list_head;
>> +	struct ufs_clk_info *clki;
>> +	u32 pclk_rate;
>> +	u32 f_min, f_max;
>> +	u8 div = 0;
>> +	int ret = 0;
>> +
>> +	if (!head || list_empty(head))
>> +		goto out;
>> +
>> +	list_for_each_entry(clki, head, list) {
>> +		if (!IS_ERR_OR_NULL(clki->clk)) {
>> +			if (!strcmp(clki->name, "aclk_ufs"))
>> +				ufs->clk_hci_core = clki->clk;
>> +			else if (!strcmp(clki->name, "sclk_unipro_apb"))
>> +				ufs->clk_apb = clki->clk;
>> +			else if (!strcmp(clki->name, "sclk_unipro_main"))
>> +				ufs->clk_unipro_main = clki->clk;
>> +		}
>> +	}
>
> Using IS_ERR_OR_NULL is normally a bug. Also the list/loop can likely be
> replaced with another way to express this.
>
ok
>> +			do {
>> +				delta = h8_time - ktime_us_delta(ktime_get(),
>> +							ufs->entry_hibern8_t);
>> +				if (delta <= 0)
>> +					break;
>> +
>> +				us = min_t(s64, delta, USEC_PER_MSEC);
>> +				if (us >= 10)
>> +					usleep_range(us, us + 10);
>> +				else
>> +					udelay(us);
>> +			} while (1);
>
> us is at least 1000 (USEC_PER_MSEC), so the else clause is never needed.
>
>> +
>> +const struct ufs_hba_variant_ops ufs_hba_exynos_ops = {
>> +	.name				= "exynos_ufs",
>> +	.init				= exynos_ufs_init,
>> +	.hce_enable_notify		= exynos_ufs_hce_enable_notify,
>> +	.link_startup_notify		= exynos_ufs_link_startup_notify,
>> +	.pwr_change_notify		= exynos_ufs_pwr_change_notify,
>> +	.specify_nexus_t_xfer_req	= exynos_ufs_specify_nexus_t_xfer_req,
>> +	.specify_nexus_t_tm_req		= exynos_ufs_specify_nexus_t_tm_req,
>> +	.hibern8_notify			= exynos_ufs_hibern8_notify,
>> +	.suspend			= exynos_ufs_suspend,
>> +	.resume				= exynos_ufs_resume,
>> +};
>> +EXPORT_SYMBOL(ufs_hba_exynos_ops);
>
> As mentioned in my reply to the build bug report, please restructure the
> driver so this is not a global exported function but gets passed by the
> probe function of the exynos driver into an exported function of the
> common driver.
>
Done,
>> diff --git a/drivers/scsi/ufs/ufs-exynos.h b/drivers/scsi/ufs/ufs-exynos.h
>> new file mode 100644
>> index 0000000..58aa714
>> --- /dev/null
>> +++ b/drivers/scsi/ufs/ufs-exynos.h
>> @@ -0,0 +1,463 @@
>> +/*
>> + * UFS Host Controller driver for Exynos specific extensions
>> + *
>> + * Copyright (C) 2014-2015 Samsung Electronics Co., Ltd.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + */
>> +
>> +#ifndef _UFS_EXYNOS_H_
>> +#define _UFS_EXYNOS_H_
>
> You have a lot of things in this header that are only used in one of the
> .c files, so just move them there and make the header as small as possible.
>
hmm..these are mostly the registers defines, will removes the one which 
are not being used as of now.
Do you think I should sill move them to .c file?

> 	Arnd
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ