[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <561D4C2A.1060704@ti.com>
Date: Tue, 13 Oct 2015 14:23:38 -0400
From: Murali Karicheri <m-karicheri2@...com>
To: WingMan Kwok <w-kwok2@...com>, <robh+dt@...nel.org>,
<pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
<kishon@...com>, <rogerq@...com>, <bhelgaas@...gle.com>,
<ssantosh@...nel.org>, <linux@....linux.org.uk>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-pci@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 3/3] ARM: keystone: dts: add PCI serdes driver bindings
On 10/13/2015 02:04 PM, WingMan Kwok wrote:
> Signed-off-by: WingMan Kwok <w-kwok2@...com>
> ---
> arch/arm/boot/dts/k2e.dtsi | 24 ++++++++++++++++++++++++
> arch/arm/boot/dts/keystone.dtsi | 25 +++++++++++++++++++++++++
> 2 files changed, 49 insertions(+)
>
> diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi
> index 675fb8e..1ba47d8 100644
> --- a/arch/arm/boot/dts/k2e.dtsi
> +++ b/arch/arm/boot/dts/k2e.dtsi
> @@ -86,6 +86,18 @@
> gpio,syscon-dev = <&devctrl 0x240>;
> };
>
> + pcie1_phy: pciephy@...6000 {
> + #phy-cells = <0>;
> + compatible = "ti,keystone-serdes-pcie";
> + reg = <0x02326000 0x4000>;
> + reg-names = "reg_serdes";
> + refclk-khz = <100000>;
> + link-rate-kbps = <5000000>;
> + phy-type = "pcie";
> + max-lanes = <2>;
> + status = "disabled";
> + };
> +
> pcie1: pcie@...20000 {
> compatible = "ti,keystone-pcie","snps,dw-pcie";
> clocks = <&clkpcie1>;
> @@ -130,6 +142,18 @@
> <GIC_SPI 375 IRQ_TYPE_EDGE_RISING>,
> <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>;
> };
> +
> + /* PCIE phy */
> + serdeses {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + serdes@0 {
> + reg = <0>;
> + phys = <&pcie1_phy>;
> + status = "disabled";
> + };
> + };
> +
> };
>
> mdio: mdio@...00f00 {
> diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
> index 72816d6..5312319 100644
> --- a/arch/arm/boot/dts/keystone.dtsi
> +++ b/arch/arm/boot/dts/keystone.dtsi
> @@ -275,6 +275,19 @@
> ti,syscon-dev = <&devctrl 0x2a0>;
> };
>
> + pcie0_phy: pciephy@...0000 {
> + #phy-cells = <0>;
> + compatible = "ti,keystone-serdes-pcie";
> + reg = <0x02320000 0x4000>;
> + reg-names = "reg_serdes";
> + refclk-khz = <100000>;
> + link-rate-kbps = <5000000>;
> + init-firmware = "k2_pcie_serdes_init.fw";
> + phy-type = "pcie";
> + max-lanes = <2>;
> + status = "disabled";
> + };
> +
> pcie0: pcie@...00000 {
> compatible = "ti,keystone-pcie", "snps,dw-pcie";
> clocks = <&clkpcie>;
> @@ -319,6 +332,18 @@
> <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>,
> <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
> };
> +
> + /* PCIE phy */
> + serdeses {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + serdes@0 {
> + reg = <0>;
> + phys = <&pcie0_phy>;
> + status = "disabled";
> + };
> + };
> +
> };
> };
> };
>
Wingman,
This should be a separate patch and remove the sane from Driver patch.
i.e. send 1/3 ane 2/3 in one series and 3/3 as a separate patch.
Thanks
Murali
--
Murali Karicheri
Linux Kernel, Keystone
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists