linux-kernel - Re: [PATCH] i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:	Sat, 17 Oct 2015 19:57:26 +0200
From:	Wolfram Sang <wsa@...-dreams.de>
To:	Mika Westerberg <mika.westerberg@...ux.intel.com>
Cc:	Christian Ruppert <christian.ruppert@...tech.com>,
	Jarkko Nikula <jarkko.nikula@...ux.intel.com>,
	Pavel Roskin <plroskin@...il.com>, linux-i2c@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH] i2c: designware: Do not use parameters from ACPI on Dell
 Inspiron 7348

On Thu, Sep 24, 2015 at 12:06:54PM +0300, Mika Westerberg wrote:
> ACPI SSCN/FMCN methods were originally added because then the platform can
> provide the most accurate HCNT/LCNT values to the driver. However, this
> seems not to be true for Dell Inspiron 7348 where using these causes the
> touchpad to fail in boot:
> 
>   i2c_hid i2c-DLL0675:00: failed to retrieve report from device.
>   i2c_designware INT3433:00: i2c_dw_handle_tx_abort: lost arbitration
>   i2c_hid i2c-DLL0675:00: failed to retrieve report from device.
>   i2c_designware INT3433:00: controller timed out
> 
> The values received from ACPI are (in fast mode):
> 
>   HCNT: 72
>   LCNT: 160
> 
> this translates to following timings (input clock is 100MHz on Broadwell):
> 
>   tHIGH: 720 ns (spec min 600 ns)
>   tLOW: 1600 ns (spec min 1300 ns)
>   Bus period: 2920 ns (assuming 300 ns tf and tr)
>   Bus speed: 342.5 kHz
> 
> Both tHIGH and tLOW are within the I2C specification.
> 
> The calculated values when ACPI parameters are not used are (in fast mode):
> 
>   HCNT: 87
>   LCNT: 159
> 
> which translates to:
> 
>   tHIGH: 870 ns (spec min 600 ns)
>   tLOW: 1590 ns (spec min 1300 ns)
>   Bus period 3060 ns (assuming 300 ns tf and tr)
>   Bus speed 326.8 kHz
> 
> These values are also within the I2C specification.
> 
> Since both ACPI and calculated values meet the I2C specification timing
> requirements it is hard to say why the touchpad does not function properly
> with the ACPI values except that the bus speed is higher in this case (but
> still well below the max 400kHz).
> 
> Solve this by adding DMI quirk to the driver that disables using ACPI
> parameters on this particulare machine.
> 
> Reported-by: Pavel Roskin <plroskin@...il.com>
> Signed-off-by: Mika Westerberg <mika.westerberg@...ux.intel.com>

Applied to for-current with Pavel's Tested-by:, thanks!


Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)