| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 26 Oct 2015 10:25:07 +0800
From: Huang Rui <ray.huang@....com>
To: Guenter Roeck <linux@...ck-us.net>
CC: Borislav Petkov <bp@...e.de>,
Peter Zijlstra <peterz@...radead.org>,
"Jean Delvare" <jdelvare@...e.de>,
Andy Lutomirski <luto@...capital.net>,
"Andreas Herrmann" <herrmann.der.user@...il.com>,
Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...nel.org>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
"Len Brown" <lenb@...nel.org>,
John Stultz <john.stultz@...aro.org>,
Fr�d�ric Weisbecker <fweisbec@...il.com>,
<lm-sensors@...sensors.org>, <linux-kernel@...r.kernel.org>,
<x86@...nel.org>,
Andreas Herrmann <herrmann.der.user@...glemail.com>,
Aravind Gopalakrishnan <Aravind.Gopalakrishnan@....com>,
Borislav Petkov <bp@...en8.de>,
Fengguang Wu <fengguang.wu@...el.com>,
Aaron Lu <aaron.lu@...el.com>, Tony Li <tony.li@....com>
Subject: Re: [PATCH v2 01/10] hwmon: (fam15h_power) Refactor attributes for
dynamically added
On Sun, Oct 25, 2015 at 07:14:27PM -0700, Guenter Roeck wrote:
> On Mon, Oct 26, 2015 at 09:58:45AM +0800, Huang Rui wrote:
> > On Fri, Oct 23, 2015 at 06:42:20AM -0700, Guenter Roeck wrote:
> > > On 10/19/2015 07:28 PM, Huang Rui wrote:
> > > >Attributes depend on the CPU model the driver gets loaded on.
> > > >Therefore, add those attributes dynamically at init time. This is more
> > > >flexible to control the different attributes on different platforms.
> > > >
> > > >Suggestedy-by: Borislav Petkov <bp@...en8.de>
> > > >Signed-off-by: Huang Rui <ray.huang@....com>
> > > >Cc: Guenter Roeck <linux@...ck-us.net>
> > > >Cc: Peter Zijlstra <peterz@...radead.org>
> > > >Cc: Ingo Molnar <mingo@...nel.org>
> > > >---
> > > > drivers/hwmon/fam15h_power.c | 70 ++++++++++++++++++++++++++++----------------
> > > > 1 file changed, 45 insertions(+), 25 deletions(-)
> > > >
> > > >diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c
> > > >index e80ee23..41d022e 100644
> > > >--- a/drivers/hwmon/fam15h_power.c
> > > >+++ b/drivers/hwmon/fam15h_power.c
> > > >@@ -41,12 +41,17 @@ MODULE_LICENSE("GPL");
> > > > #define REG_TDP_RUNNING_AVERAGE 0xe0
> > > > #define REG_TDP_LIMIT3 0xe8
> > > >
> > > >+#define FAM15H_MIN_NUM_ATTRS 2
> > > >+#define FAM15H_NUM_GROUPS 2
> > > >+
> > > > struct fam15h_power_data {
> > > > struct pci_dev *pdev;
> > > > unsigned int tdp_to_watts;
> > > > unsigned int base_tdp;
> > > > unsigned int processor_pwr_watts;
> > > > unsigned int cpu_pwr_sample_ratio;
> > > >+ const struct attribute_group *fam15h_power_groups[FAM15H_NUM_GROUPS];
> > > >+ struct attribute_group fam15h_power_group;
> > > > };
> > > >
> > > > static ssize_t show_power(struct device *dev,
> > > >@@ -105,29 +110,31 @@ static ssize_t show_power_crit(struct device *dev,
> > > > }
> > > > static DEVICE_ATTR(power1_crit, S_IRUGO, show_power_crit, NULL);
> > > >
> > > >-static umode_t fam15h_power_is_visible(struct kobject *kobj,
> > > >- struct attribute *attr,
> > > >- int index)
> > > >+static int fam15h_power_init_attrs(struct pci_dev *pdev,
> > > >+ struct fam15h_power_data *data)
> > > > {
> > > >- /* power1_input is only reported for Fam15h, Models 00h-0fh */
> > > >- if (attr == &dev_attr_power1_input.attr &&
> > > >- (boot_cpu_data.x86 != 0x15 || boot_cpu_data.x86_model > 0xf))
> > > >- return 0;
> > > >+ int n = FAM15H_MIN_NUM_ATTRS;
> > > >+ struct attribute **fam15h_power_attrs;
> > > >
> > > >- return attr->mode;
> > > >-}
> > > >+ if (boot_cpu_data.x86 == 0x15 && boot_cpu_data.x86_model <= 0xf)
> > > >+ n += 1;
> > > >
> > > >-static struct attribute *fam15h_power_attrs[] = {
> > > >- &dev_attr_power1_input.attr,
> > > >- &dev_attr_power1_crit.attr,
> > > >- NULL
> > > >-};
> > > >+ fam15h_power_attrs = devm_kcalloc(&pdev->dev, n,
> > > >+ sizeof(*fam15h_power_attrs),
> > > >+ GFP_KERNEL);
> > > >
> > > >-static const struct attribute_group fam15h_power_group = {
> > > >- .attrs = fam15h_power_attrs,
> > > >- .is_visible = fam15h_power_is_visible,
> > > >-};
> > > >-__ATTRIBUTE_GROUPS(fam15h_power);
> > > >+ if (!fam15h_power_attrs)
> > > >+ return -ENOMEM;
> > > >+
> > > >+ n = 0;
> > > >+ fam15h_power_attrs[n++] = &dev_attr_power1_crit.attr;
> > > >+ if (boot_cpu_data.x86 == 0x15 && boot_cpu_data.x86_model <= 0xf)
> > > >+ fam15h_power_attrs[n++] = &dev_attr_power1_input.attr;
> > > >+
> > > >+ data->fam15h_power_group.attrs = fam15h_power_attrs;
> > > >+
> > > >+ return 0;
> > > >+}
> > > >
> > > > static bool should_load_on_this_node(struct pci_dev *f4)
> > > > {
> > > >@@ -186,11 +193,12 @@ static int fam15h_power_resume(struct pci_dev *pdev)
> > > > #define fam15h_power_resume NULL
> > > > #endif
> > > >
> > > >-static void fam15h_power_init_data(struct pci_dev *f4,
> > > >- struct fam15h_power_data *data)
> > > >+static int fam15h_power_init_data(struct pci_dev *f4,
> > > >+ struct fam15h_power_data *data)
> > > > {
> > > > u32 val, eax, ebx, ecx, edx;
> > > > u64 tmp;
> > > >+ int ret;
> > > >
> > > > pci_read_config_dword(f4, REG_PROCESSOR_TDP, &val);
> > > > data->base_tdp = val >> 16;
> > > >@@ -211,11 +219,15 @@ static void fam15h_power_init_data(struct pci_dev *f4,
> > > > /* convert to microWatt */
> > > > data->processor_pwr_watts = (tmp * 15625) >> 10;
> > > >
> > > >+ ret = fam15h_power_init_attrs(f4, data);
> > > >+ if (ret)
> > > >+ return ret;
> > > >+
> > > > cpuid(0x80000007, &eax, &ebx, &ecx, &edx);
> > > >
> > > > /* CPUID Fn8000_0007:EDX[12] indicates to support accumulated power */
> > > > if (!(edx & BIT(12)))
> > > >- return;
> > > >+ return 0;
> > > >
> > > > /*
> > > > * determine the ratio of the compute unit power accumulator
> > > >@@ -223,14 +235,17 @@ static void fam15h_power_init_data(struct pci_dev *f4,
> > > > * Fn8000_0007:ECX
> > > > */
> > > > data->cpu_pwr_sample_ratio = ecx;
> > > >+
> > > >+ return 0;
> > > > }
> > > >
> > > > static int fam15h_power_probe(struct pci_dev *pdev,
> > > >- const struct pci_device_id *id)
> > > >+ const struct pci_device_id *id)
> > > > {
> > > > struct fam15h_power_data *data;
> > > > struct device *dev = &pdev->dev;
> > > > struct device *hwmon_dev;
> > > >+ int ret;
> > > >
> > > > /*
> > > > * though we ignore every other northbridge, we still have to
> > > >@@ -246,12 +261,17 @@ static int fam15h_power_probe(struct pci_dev *pdev,
> > > > if (!data)
> > > > return -ENOMEM;
> > > >
> > > >- fam15h_power_init_data(pdev, data);
> > > >+ ret = fam15h_power_init_data(pdev, data);
> > > >+ if (ret)
> > > >+ return ret;
> > > >+
> > > > data->pdev = pdev;
> > > >
> > > >+ data->fam15h_power_groups[0] = &data->fam15h_power_group;
> > > >+
> > > > hwmon_dev = devm_hwmon_device_register_with_groups(dev, "fam15h_power",
> > > > data,
> > > >- fam15h_power_groups);
> > > >+ (const struct attribute_group **)&data->fam15h_power_groups);
> > >
> > > Why this typecast ? It should not be needed.
> > >
> >
> > That's because there will be a warning without the typecast.
> >
> > Expected 'const struct attribute_group **', but current type is 'const
> > struct attribute_group * (*)[2]'.
> >
>
> Maybe then either use data->fam15h_power_groups (no &) or
> &data->fam15h_power_groups[0].
Looks better. :)
>
> On a side note, the "fam15h_" prefix in the variable name is really
> unnecessary unless there are some other groups in the same data structure.
> Even the "power_" prefix doesn't really add any value unless there
> are other groups.
>
OK, I will update it on V3.
Thanks,
Rui
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists