linux-kernel - Re: [PATCH v2 02/32] devicetree: bindings: scsi: HiSi SAS

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20151027143939.GG3091@leverpostej>
Date:	Tue, 27 Oct 2015 14:39:39 +0000
From:	Mark Rutland <mark.rutland@....com>
To:	John Garry <john.garry@...wei.com>
Cc:	JBottomley@...n.com, robh+dt@...nel.org, pawel.moll@....com,
	ijc+devicetree@...lion.org.uk, galak@...eaurora.org, arnd@...db.de,
	linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org,
	devicetree@...r.kernel.org, linuxarm@...wei.com,
	john.garry2@...l.dcu.ie, hare@...e.de, xuwei5@...ilicon.com,
	zhangfei.gao@...aro.org
Subject: Re: [PATCH v2 02/32] devicetree: bindings: scsi: HiSi SAS

On Tue, Oct 27, 2015 at 01:09:15PM +0000, John Garry wrote:
> On 26/10/2015 14:45, Mark Rutland wrote:
> >On Mon, Oct 26, 2015 at 10:14:33PM +0800, John Garry wrote:
> >>Add devicetree bindings for HiSilicon SAS driver.
> >>
> >>Signed-off-by: John Garry <john.garry@...wei.com>
> >>---
> >>  .../devicetree/bindings/scsi/hisilicon-sas.txt     | 70 ++++++++++++++++++++++
> >>  1 file changed, 70 insertions(+)
> >>  create mode 100644 Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
> >>
> >>diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
> >>new file mode 100644
> >>index 0000000..d1e7b2a
> >>--- /dev/null
> >>+++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
> >>@@ -0,0 +1,70 @@
> >>+* HiSilicon SAS controller
> >>+
> >>+The HiSilicon SAS controller supports SAS/SATA.
> >>+
> >>+Main node required properties:
> >>+  - compatible : value should be as follows:
> >>+	(a) "hisilicon,sas-controller-v1" for v1 of HiSilicon SAS controller IP
> >>+  - reg : Address and length of the SAS register
> >>+  - hisilicon,sas-syscon: phandle of syscon used for sas control
> >>+  - ctrl-reg : offset to the following SAS control registers (in order):
> >>+		- reset assert
> >>+		- clock disable
> >>+		- reset status
> >>+		- reset de-assert
> >>+		- clock enable
> >
> >This needs a better name, and it should probably be split up into
> >several properties.
> >
> >However, it sounds like the syscon is actually a clock+reset
> >controller, and should be modelled as such. It's not actually a part of
> >the SAS controller as such.
> 
> The syscon block is a general subsystem control block, and it is not
> specifically only for controlling reset and enabling clocks (other
> functions include serdes control, for example). It is also shared
> with other peripherals.
> 
> So we can remove the ctrl-reg property (since it is not part of the
> SAS controller), and add the relevant syscon register offsets to the
> "hisilicon,sas-syscon" property, like this:
> hisilicon,sas-syscon = <&sas_ctrl0 0xa60 0x33c 0x5a30 0xa64 0x338>;
> 
> Ok?

It would be better to have each offset in a separate property.

Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/