[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20151027145249.GE8660@localhost>
Date: Tue, 27 Oct 2015 09:52:50 -0500
From: Bjorn Helgaas <helgaas@...nel.org>
To: Suravee Suthikulpanit <Suravee.Suthikulpanit@....com>
Cc: bhelgaas@...gle.com, rjw@...ysocki.net, lenb@...nel.org,
catalin.marinas@....com, will.deacon@....com,
hanjun.guo@...aro.org, thomas.lendacky@....com,
herbert@...dor.apana.org.au, davem@...emloft.net,
linux-acpi@...r.kernel.org, linux-pci@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH V4 0/8] PCI: ACPI: Setting up DMA coherency for PCI
device from _CCA attribute
Hi Suravee,
On Wed, Oct 21, 2015 at 08:52:03AM -0700, Suravee Suthikulpanit wrote:
> This patch series adds support to setup DMA coherency for PCI device using
> the ACPI _CCA attribute. According to the ACPI spec, the _CCA attribute
> is required for ARM64. Therefore, this patch is a pre-req for ACPI PCI
> support for ARM64 which is currently in development. Also, this should
> not affect other architectures that does not define
> CONFIG_ACPI_CCA_REQUIRED, since the default value is coherent.
>
> In the process, this series also introduces enum dev_dma_attr and a set
> of APIs to query device DMA attribute. These APIs replace the obsolete
> device_dma_is_coherent(), and acpi_check_dma().
>
> I have also included a patch from Jeremy posted here:
> http://www.spinics.net/lists/linux-usb/msg128582.html
>
> This patch series has been tested on AMD Seattle RevB platform.
> The git tree containing tested code and pre-req patches are posted here:
>
> http://github.com/ssuthiku/linux.git pci-cca-v4
>
> Changes from V3: (https://lkml.org/lkml/2015/8/26/389)
> * Clean up suggested by Bjorn
> * Introduce enum dev_dma_attr
> * Replace device_dma_is_coherent() and acpi_check_dma() with
> new APIs.
>
> Changes from V2: (https://lkml.org/lkml/2015/8/25/549)
> * Return -ENOSUPP instead of -1 (per Rafael's suggestion)
> * Add WARN() when fail to setup DMA for PCI device when booting
> ACPI (per Arnd's suggestion)
> * Added Acked-by from Rob.
> * Minor clean up
>
> Changes from V1: (https://lkml.org/lkml/2015/8/13/182)
> * Include patch 1 from Jeremy to enable support for _CCA=0
> * Clean up acpi_check_dma() per Bjorn suggestions
> * Split the original V1 patch into two patches (patch 3 and 4)
>
> Jeremy Linton (1):
> Honor ACPI _CCA attribute setting
>
> Suravee Suthikulpanit (7):
> device property: Introducing enum dev_dma_attr
> acpi: Adding DMA Attribute APIs for ACPI Device
> device property: Adding DMA Attribute APIs for Generic Devices
> device property: acpi: Make use of the new DMA Attribute APIs
> device property: acpi: Remove unused DMA APIs
> PCI: OF: Move of_pci_dma_configure() to pci_dma_configure()
> PCI: ACPI: Add support for PCI device DMA coherency
>
> drivers/acpi/acpi_platform.c | 7 +++++-
> drivers/acpi/glue.c | 8 +++---
> drivers/acpi/scan.c | 42 +++++++++++++++++++++++++++++++
> drivers/base/property.c | 32 +++++++++++++++++------
> drivers/crypto/ccp/ccp-platform.c | 9 ++++++-
> drivers/net/ethernet/amd/xgbe/xgbe-main.c | 9 ++++++-
> drivers/of/of_pci.c | 20 ---------------
> drivers/pci/probe.c | 36 ++++++++++++++++++++++++--
> include/acpi/acpi_bus.h | 36 +++-----------------------
> include/linux/acpi.h | 7 +++++-
> include/linux/of_pci.h | 3 ---
> include/linux/property.h | 10 +++++++-
> 12 files changed, 145 insertions(+), 74 deletions(-)
I had a couple minor comments. It's sort of a toss-up, but this feels
more ACPI-flavored than PCI, so I assume Rafael will take this whole
series unless I hear otherwise.
Acked-by: Bjorn Helgaas <bhelgaas@...gle.com>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists