linux-kernel - Re: [PATCH V8] mm: memory hot-add: hot-added memory can not be added to movable zone by default

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Wed, 04 Nov 2015 08:12:59 -0800 (PST)
From:	Yasuaki Ishimatsu <yasu.isimatu@...il.com>
To:	Xishi Qiu <qiuxishi@...wei.com>
Cc:	liuchangsheng <liuchangsheng@...pur.com>,
	<akpm@...ux-foundation.org>, <isimatu.yasuaki@...fujitsu.com>,
	<vbabka@...e.cz>, <linux-mm@...ck.org>,
	<linux-kernel@...r.kernel.org>, <wunan@...pur.com>,
	<yanxiaofeng@...pur.com>, <fandd@...pur.com>,
	Wang Nan <wangnan0@...wei.com>,
	Dave Hansen <dave.hansen@...el.com>,
	Yinghai Lu <yinghai@...nel.org>,
	Tang Chen <tangchen@...fujitsu.com>,
	Toshi Kani <toshi.kani@...com>
Subject: Re: [PATCH V8] mm: memory hot-add: hot-added memory can not be
 added to movable zone by default


On Wed, 4 Nov 2015 18:20:14 +0800
Xishi Qiu <qiuxishi@...wei.com> wrote:

> On 2015/11/4 16:23, liuchangsheng wrote:
> 
> > After the user config CONFIG_MOVABLE_NODE,
> > When the memory is hot added, should_add_memory_movable() return 0
> > because all zones including ZONE_MOVABLE are empty,
> > so the memory that was hot added will be assigned to ZONE_NORMAL,
> > and we need using the udev rules to online the memory automatically:
> > SUBSYSTEM=="memory", ACTION=="add", ATTR{state}=="offline",
> > ATTR{state}="online_movable"
> > The memory block onlined by udev must be adjacent to ZONE_MOVABLE.
> > The events of memory section are notified to udev asynchronously,
> 
> Hi Yasuaki,
> 

> If udev onlines memory in descending order, like 3->2->1->0, it will
> success, but we notifiy to udev in ascending order, like 0->1->2->3,
> so the udev rules cannot online memory as movable, right?

right.

> 
> > so it can not ensure that the memory block onlined by udev is
> > adjacent to ZONE_MOVABLE.So it can't ensure memory online always success.
> > But we want the whole node to be added to ZONE_MOVABLE by default.
> > 
> > So we change should_add_memory_movable(): if the user config
> > CONFIG_MOVABLE_NODE and movable_node kernel option
> > and the ZONE_NORMAL is empty or the pfn of the hot-added memory
> > is after the end of the ZONE_NORMAL it will always return 1
> > and then the whole node will be added to ZONE_MOVABLE by default.
> > If we want the node to be assigned to ZONE_NORMAL,
> > we can do it as follows:
> > "echo online_kernel > /sys/devices/system/memory/memoryXXX/state"
> > 
> 

> The order should like 0->1->2->3, right? 3->2->1->0 will be failed.

right.

Thanks,
Yasuaki Ishimatsu

> 
> > Signed-off-by: liuchangsheng <liuchangsheng@...pur.com>
> > Signed-off-by: Xiaofeng Yan <yanxiaofeng@...pur.com>
> > Tested-by: Dongdong Fan <fandd@...pur.com>
> > Reviewed-by: <yasu.isimatu@...il.com>
> > Cc: Wang Nan <wangnan0@...wei.com>
> > Cc: Dave Hansen <dave.hansen@...el.com>
> > Cc: Yinghai Lu <yinghai@...nel.org>
> > Cc: Tang Chen <tangchen@...fujitsu.com>
> > Cc: Yasuaki Ishimatsu <isimatu.yasuaki@...fujitsu.com>
> > Cc: Toshi Kani <toshi.kani@...com>
> > Cc: Xishi Qiu <qiuxishi@...wei.com>
> > ---
> >  mm/memory_hotplug.c | 7 +++++++
> >  1 file changed, 7 insertions(+)
> > 
> > diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> > index aa992e2..8617b9f 100644
> > --- a/mm/memory_hotplug.c
> > +++ b/mm/memory_hotplug.c
> > @@ -1201,6 +1201,9 @@ static int check_hotplug_memory_range(u64 start, u64 size)
> >  /*
> >   * If movable zone has already been setup, newly added memory should be check.
> >   * If its address is higher than movable zone, it should be added as movable.
> > + * And if system boots up with movable_node and config CONFIG_MOVABLE_NOD and
> > + * added memory does not overlap the zone before MOVABLE_ZONE,
> > + * the memory is added as movable.
> >   * Without this check, movable zone may overlap with other zone.
> >   */
> >  static int should_add_memory_movable(int nid, u64 start, u64 size)
> > @@ -1208,6 +1211,10 @@ static int should_add_memory_movable(int nid, u64 start, u64 size)
> >  	unsigned long start_pfn = start >> PAGE_SHIFT;
> >  	pg_data_t *pgdat = NODE_DATA(nid);
> >  	struct zone *movable_zone = pgdat->node_zones + ZONE_MOVABLE;
> > +	struct zone *pre_zone = pgdat->node_zones + (ZONE_MOVABLE - 1);
> > +
> > +	if (movable_node_is_enabled() && (zone_end_pfn(pre_zone) <= start_pfn))
> > +		return 1;
> >  
> 
> Looks good to me.
> 
> How about add some comment in mm/Kconfig?
> 
> Thanks,
> Xishi Qiu
> 
> >  	if (zone_is_empty(movable_zone))
> >  		return 0;
> 
> 
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/