lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1447054721-7390-1-git-send-email-baolu.lu@linux.intel.com>
Date:	Mon,  9 Nov 2015 15:38:29 +0800
From:	Lu Baolu <baolu.lu@...ux.intel.com>
To:	Mathias Nyman <mathias.nyman@...el.com>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Alan Stern <stern@...land.harvard.edu>
Cc:	linux-usb@...r.kernel.org, x86@...nel.org,
	linux-kernel@...r.kernel.org, Lu Baolu <baolu.lu@...ux.intel.com>
Subject: [PATCH v3 00/12] usb: early: add support for early printk through USB3 debug port

This patch series adds support for early printk through USB3 debug port.
USB3 debug port is described in xHCI specification as an optional extended
capability.

The first patch adds a file in sysfs, through which users can check
whether the debug capability is supported by a specific host controller,
and the hardware state.

Patch 2 to 10 add the driver for xHCI debug capability. It interfaces with
the register set and provides the required ops (read/write/control) to upper
layers. Early printk is one consumer of these ops. The hooks for early printk
are introduced in patch 9. This design is similar to what we have done in
drivers/usb/early/ehci-dbgp.c.

Patch 11 is a minor change to usb_debug module. This change is required to
bind usb_debug with the USB3 debug device.

Patch 12 is the design document and user guide.

Change log:
v1->v2:
(1) Patch 1 re-implemented. "debugfs" has been replaced with sysfs.
    The scope reduced from all extended capabilities to debug port
    specific.
(2) Patch 11 changed. Removed unnecessary .bulk_out_size setting.

v2->v3:
(1) Patch 11 got acked by Johan Hovold.

Lu Baolu (12):
  usb: xhci: add sysfs file for xHCI debug port
  x86: fixmap: add permanent fixmap for xhci debug port
  usb: xhci: dbc: probe and setup xhci debug capability
  usb: xhci: dbc: add support for Intel xHCI dbc quirk
  usb: xhci: dbc: add debug buffer
  usb: xhci: dbc: add bulk out and bulk in interfaces
  usb: xhci: dbc: handle dbc-configured exit
  usb: xhci: dbc: handle endpoint stall
  x86: early_printk: add USB3 debug port earlyprintk support
  usb: xhci: dbc: add handshake between debug target and host
  usb: serial: usb_debug: add support for dbc debug device
  usb: doc: add document for xHCI DbC driver

 .../ABI/testing/sysfs-bus-pci-drivers-xhci_hcd     |   23 +
 Documentation/kernel-parameters.txt                |    1 +
 Documentation/usb/xhci-dbc.txt                     |  325 +++++
 MAINTAINERS                                        |    8 +
 arch/x86/Kconfig.debug                             |   12 +
 arch/x86/include/asm/fixmap.h                      |    4 +
 arch/x86/kernel/early_printk.c                     |    5 +
 drivers/usb/early/Makefile                         |    1 +
 drivers/usb/early/xhci-dbc.c                       | 1407 ++++++++++++++++++++
 drivers/usb/host/Makefile                          |    2 +-
 drivers/usb/host/xhci-ext-caps.h                   |   14 +-
 drivers/usb/host/xhci-sysfs.c                      |  100 ++
 drivers/usb/host/xhci.c                            |    4 +
 drivers/usb/host/xhci.h                            |    4 +
 drivers/usb/serial/usb_debug.c                     |   28 +-
 include/linux/usb/xhci-dbc.h                       |  224 ++++
 16 files changed, 2157 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd
 create mode 100644 Documentation/usb/xhci-dbc.txt
 create mode 100644 drivers/usb/early/xhci-dbc.c
 create mode 100644 drivers/usb/host/xhci-sysfs.c
 create mode 100644 include/linux/usb/xhci-dbc.h

-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ