| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <564E851A.2070205@roeck-us.net>
Date: Thu, 19 Nov 2015 18:27:38 -0800
From: Guenter Roeck <linux@...ck-us.net>
To: Mans Rullgard <mans@...sr.com>, Wim Van Sebroeck <wim@...ana.be>,
linux-kernel@...r.kernel.org, linux-watchdog@...r.kernel.org
Subject: Re: [PATCH v4] watchdog: add support for Sigma Designs
SMP86xx/SMP87xx
On 11/19/2015 02:09 PM, Mans Rullgard wrote:
> This adds support for the Sigma Designs SMP86xx/SMP87xx family built-in
> watchdog.
>
> Signed-off-by: Mans Rullgard <mans@...sr.com>
Reviewed-by: Guenter Roeck <linux@...ck-us.net>
Did you send the bindings document to some other mailing list (only) ?
I see "PATCH 2/2" in some of your submissions, but I seem to be missing
patch 1/2.
Thanks,
Guenter
> ---
> Changes:
> - #include bitops.h
> - clk_disable_unprepare() on failure
> ---
> drivers/watchdog/Kconfig | 10 ++
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/tangox_wdt.c | 225 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 236 insertions(+)
> create mode 100644 drivers/watchdog/tangox_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 7a8a6c6..f43ff7a 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -135,6 +135,16 @@ config MENF21BMC_WATCHDOG
> This driver can also be built as a module. If so the module
> will be called menf21bmc_wdt.
>
> +config TANGOX_WATCHDOG
> + tristate "Sigma Designs SMP86xx/SMP87xx watchdog"
> + select WATCHDOG_CORE
> + depends on ARCH_TANGOX || COMPILE_TEST
> + help
> + Support for the watchdog in Sigma Designs SMP86xx (tango3)
> + and SMP87xx (tango4) family chips.
> +
> + This driver can be built as a module. The module name is tangox_wdt.
> +
> config WM831X_WATCHDOG
> tristate "WM831x watchdog"
> depends on MFD_WM831X
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 53d4827..46cb387 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -187,6 +187,7 @@ obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
> obj-$(CONFIG_DA9062_WATCHDOG) += da9062_wdt.o
> obj-$(CONFIG_DA9063_WATCHDOG) += da9063_wdt.o
> obj-$(CONFIG_GPIO_WATCHDOG) += gpio_wdt.o
> +obj-$(CONFIG_TANGOX_WATCHDOG) += tangox_wdt.o
> obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
> obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
> obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
> diff --git a/drivers/watchdog/tangox_wdt.c b/drivers/watchdog/tangox_wdt.c
> new file mode 100644
> index 0000000..b9ee624
> --- /dev/null
> +++ b/drivers/watchdog/tangox_wdt.c
> @@ -0,0 +1,225 @@
> +/*
> + * Copyright (C) 2015 Mans Rullgard <mans@...sr.com>
> + * SMP86xx/SMP87xx Watchdog driver
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +#include <linux/notifier.h>
> +#include <linux/platform_device.h>
> +#include <linux/reboot.h>
> +#include <linux/watchdog.h>
> +
> +#define DEFAULT_TIMEOUT 30
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, bool, 0);
> +MODULE_PARM_DESC(nowayout,
> + "Watchdog cannot be stopped once started (default="
> + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +
> +static unsigned int timeout;
> +module_param(timeout, int, 0);
> +MODULE_PARM_DESC(timeout, "Watchdog timeout");
> +
> +/*
> + * Counter counts down from programmed value. Reset asserts when
> + * the counter reaches 1.
> + */
> +#define WD_COUNTER 0
> +
> +#define WD_CONFIG 4
> +#define WD_CONFIG_XTAL_IN BIT(0)
> +#define WD_CONFIG_DISABLE BIT(31)
> +
> +struct tangox_wdt_device {
> + struct watchdog_device wdt;
> + void __iomem *base;
> + unsigned long clk_rate;
> + struct clk *clk;
> + struct notifier_block restart;
> +};
> +
> +static int tangox_wdt_set_timeout(struct watchdog_device *wdt,
> + unsigned int new_timeout)
> +{
> + wdt->timeout = new_timeout;
> +
> + return 0;
> +}
> +
> +static int tangox_wdt_start(struct watchdog_device *wdt)
> +{
> + struct tangox_wdt_device *dev = watchdog_get_drvdata(wdt);
> + u32 ticks;
> +
> + ticks = 1 + wdt->timeout * dev->clk_rate;
> + writel(ticks, dev->base + WD_COUNTER);
> +
> + return 0;
> +}
> +
> +static int tangox_wdt_stop(struct watchdog_device *wdt)
> +{
> + struct tangox_wdt_device *dev = watchdog_get_drvdata(wdt);
> +
> + writel(0, dev->base + WD_COUNTER);
> +
> + return 0;
> +}
> +
> +static unsigned int tangox_wdt_get_timeleft(struct watchdog_device *wdt)
> +{
> + struct tangox_wdt_device *dev = watchdog_get_drvdata(wdt);
> + u32 count;
> +
> + count = readl(dev->base + WD_COUNTER);
> +
> + if (!count)
> + return 0;
> +
> + return (count - 1) / dev->clk_rate;
> +}
> +
> +static const struct watchdog_info tangox_wdt_info = {
> + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
> + .identity = "tangox watchdog",
> +};
> +
> +static const struct watchdog_ops tangox_wdt_ops = {
> + .start = tangox_wdt_start,
> + .stop = tangox_wdt_stop,
> + .set_timeout = tangox_wdt_set_timeout,
> + .get_timeleft = tangox_wdt_get_timeleft,
> +};
> +
> +static int tangox_wdt_restart(struct notifier_block *nb, unsigned long action,
> + void *data)
> +{
> + struct tangox_wdt_device *dev =
> + container_of(nb, struct tangox_wdt_device, restart);
> +
> + writel(1, dev->base + WD_COUNTER);
> +
> + return NOTIFY_DONE;
> +}
> +
> +static int tangox_wdt_probe(struct platform_device *pdev)
> +{
> + struct tangox_wdt_device *dev;
> + struct resource *res;
> + u32 config;
> + int err;
> +
> + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
> + if (!dev)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + dev->base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(dev->base))
> + return PTR_ERR(dev->base);
> +
> + dev->clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(dev->clk))
> + return PTR_ERR(dev->clk);
> +
> + err = clk_prepare_enable(dev->clk);
> + if (err)
> + return err;
> +
> + dev->clk_rate = clk_get_rate(dev->clk);
> +
> + dev->wdt.parent = &pdev->dev;
> + dev->wdt.info = &tangox_wdt_info;
> + dev->wdt.ops = &tangox_wdt_ops;
> + dev->wdt.timeout = DEFAULT_TIMEOUT;
> + dev->wdt.min_timeout = 1;
> + dev->wdt.max_timeout = (U32_MAX - 1) / dev->clk_rate;
> +
> + watchdog_init_timeout(&dev->wdt, timeout, &pdev->dev);
> + watchdog_set_nowayout(&dev->wdt, nowayout);
> + watchdog_set_drvdata(&dev->wdt, dev);
> +
> + /*
> + * Deactivate counter if disable bit is set to avoid
> + * accidental reset.
> + */
> + config = readl(dev->base + WD_CONFIG);
> + if (config & WD_CONFIG_DISABLE)
> + writel(0, dev->base + WD_COUNTER);
> +
> + writel(WD_CONFIG_XTAL_IN, dev->base + WD_CONFIG);
> +
> + /*
> + * Mark as active and restart with configured timeout if
> + * already running.
> + */
> + if (readl(dev->base + WD_COUNTER)) {
> + set_bit(WDOG_ACTIVE, &dev->wdt.status);
> + tangox_wdt_start(&dev->wdt);
> + }
> +
> + err = watchdog_register_device(&dev->wdt);
> + if (err) {
> + clk_disable_unprepare(dev->clk);
> + return err;
> + }
> +
> + platform_set_drvdata(pdev, dev);
> +
> + dev->restart.notifier_call = tangox_wdt_restart;
> + dev->restart.priority = 128;
> + err = register_restart_handler(&dev->restart);
> + if (err)
> + dev_warn(&pdev->dev, "failed to register restart handler\n");
> +
> + dev_info(dev->wdt.dev, "SMP86xx/SMP87xx watchdog registered\n");
> +
> + return 0;
> +}
> +
> +static int tangox_wdt_remove(struct platform_device *pdev)
> +{
> + struct tangox_wdt_device *dev = platform_get_drvdata(pdev);
> +
> + tangox_wdt_stop(&dev->wdt);
> + clk_disable_unprepare(dev->clk);
> +
> + unregister_restart_handler(&dev->restart);
> + watchdog_unregister_device(&dev->wdt);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id tangox_wdt_dt_ids[] = {
> + { .compatible = "sigma,smp8642-wdt" },
> + { .compatible = "sigma,smp8759-wdt" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, tangox_wdt_dt_ids);
> +
> +static struct platform_driver tangox_wdt_driver = {
> + .probe = tangox_wdt_probe,
> + .remove = tangox_wdt_remove,
> + .driver = {
> + .name = "tangox-wdt",
> + .of_match_table = tangox_wdt_dt_ids,
> + },
> +};
> +
> +module_platform_driver(tangox_wdt_driver);
> +
> +MODULE_AUTHOR("Mans Rullgard <mans@...sr.com>");
> +MODULE_DESCRIPTION("SMP86xx/SMP87xx Watchdog driver");
> +MODULE_LICENSE("GPL");
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists