lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Sat, 21 Nov 2015 17:08:47 -0800
From:	Bjorn Andersson <bjorn@...o.se>
To:	Thierry Reding <thierry.reding@...il.com>,
	David Airlie <airlied@...ux.ie>
Cc:	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>
Subject: Re: [PATCH 3/3] drm/panel: Add Panasonic VVX10F034N00 MIPI DSI panel

On Fri, Oct 30, 2015 at 5:38 PM,  <bjorn@...o.se> wrote:

Ping?

> From: Werner Johansson <werner.johansson@...ymobile.com>
>
> This adds support for the Panasonic panel found in some Xperia Z2
> tablets.
>
> Signed-off-by: Werner Johansson <werner.johansson@...ymobile.com>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@...ymobile.com>
> ---
>  drivers/gpu/drm/panel/Kconfig                      |  10 +
>  drivers/gpu/drm/panel/Makefile                     |   1 +
>  .../gpu/drm/panel/panel-panasonic-vvx10f034n00.c   | 334 +++++++++++++++++++++
>  3 files changed, 345 insertions(+)
>  create mode 100644 drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 7d4704b..77a20d6 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -51,4 +51,14 @@ config DRM_PANEL_SHARP_LQ101R1SX01
>           To compile this driver as a module, choose M here: the module
>           will be called panel-sharp-lq101r1sx01.
>
> +config DRM_PANEL_PANASONIC_VVX10F034N00
> +       tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
> +       depends on OF
> +       depends on DRM_MIPI_DSI
> +       depends on BACKLIGHT_CLASS_DEVICE
> +       help
> +         Say Y here if you want to enable support for Panasonic VVX10F034N00
> +         WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
> +         Xperia Z2 tablets
> +
>  endmenu
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index d0f016d..a2ca8ff 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -3,3 +3,4 @@ obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
>  obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
>  obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o
>  obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
> +obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o
> diff --git a/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c b/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c
> new file mode 100644
> index 0000000..7f915f7
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c
> @@ -0,0 +1,334 @@
> +/*
> + * Copyright (C) 2015 Red Hat
> + * Copyright (C) 2015 Sony Mobile Communications Inc.
> + * Author: Werner Johansson <werner.johansson@...ymobile.com>
> + *
> + * Based on AUO panel driver by Rob Clark <robdclark@...il.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_panel.h>
> +
> +#include <video/mipi_display.h>
> +
> +/*
> + * When power is turned off to this panel a minimum off time of 500ms has to be
> + * observed before powering back on as there's no external reset pin. Keep
> + * track of earliest wakeup time and delay subsequent prepare call accordingly
> + */
> +#define MIN_POFF_MS (500)
> +
> +struct wuxga_nt_panel {
> +       struct drm_panel base;
> +       struct mipi_dsi_device *dsi;
> +
> +       struct backlight_device *backlight;
> +       struct regulator *supply;
> +
> +       bool prepared;
> +       bool enabled;
> +
> +       ktime_t earliest_wake;
> +
> +       const struct drm_display_mode *mode;
> +};
> +
> +static inline struct wuxga_nt_panel *to_wuxga_nt_panel(struct drm_panel *panel)
> +{
> +       return container_of(panel, struct wuxga_nt_panel, base);
> +}
> +
> +static int wuxga_nt_panel_on(struct wuxga_nt_panel *wuxga_nt)
> +{
> +       struct mipi_dsi_device *dsi = wuxga_nt->dsi;
> +       int ret;
> +
> +       ret = mipi_dsi_turn_on_peripheral(dsi);
> +       if (ret < 0)
> +               return ret;
> +
> +       return 0;
> +}
> +
> +static int wuxga_nt_panel_disable(struct drm_panel *panel)
> +{
> +       struct wuxga_nt_panel *wuxga_nt = to_wuxga_nt_panel(panel);
> +
> +       if (!wuxga_nt->enabled)
> +               return 0;
> +
> +       mipi_dsi_shutdown_peripheral(wuxga_nt->dsi);
> +
> +       if (wuxga_nt->backlight) {
> +               wuxga_nt->backlight->props.power = FB_BLANK_POWERDOWN;
> +               wuxga_nt->backlight->props.state |= BL_CORE_FBBLANK;
> +               backlight_update_status(wuxga_nt->backlight);
> +       }
> +
> +       wuxga_nt->enabled = false;
> +
> +       return 0;
> +}
> +
> +static int wuxga_nt_panel_unprepare(struct drm_panel *panel)
> +{
> +       struct wuxga_nt_panel *wuxga_nt = to_wuxga_nt_panel(panel);
> +
> +       if (!wuxga_nt->prepared)
> +               return 0;
> +
> +       regulator_disable(wuxga_nt->supply);
> +       wuxga_nt->earliest_wake = ktime_add_ms(ktime_get_real(), MIN_POFF_MS);
> +       wuxga_nt->prepared = false;
> +
> +       return 0;
> +}
> +
> +static int wuxga_nt_panel_prepare(struct drm_panel *panel)
> +{
> +       struct wuxga_nt_panel *wuxga_nt = to_wuxga_nt_panel(panel);
> +       int ret;
> +       s64 enablewait;
> +
> +       if (wuxga_nt->prepared)
> +               return 0;
> +
> +       /*
> +        * If the user re-enabled the panel before the required off-time then
> +        * we need to wait the remaining period before re-enabling regulator
> +        */
> +       enablewait = ktime_ms_delta(wuxga_nt->earliest_wake, ktime_get_real());
> +
> +       /* Sanity check, this should never happen */
> +       if (enablewait > MIN_POFF_MS)
> +               enablewait = MIN_POFF_MS;
> +
> +       if (enablewait > 0)
> +               msleep(enablewait);
> +
> +       ret = regulator_enable(wuxga_nt->supply);
> +       if (ret < 0)
> +               return ret;
> +
> +       /*
> +        * A minimum delay of 250ms is required after power-up until commands
> +        * can be sent
> +        */
> +       msleep(250);
> +
> +       ret = wuxga_nt_panel_on(wuxga_nt);
> +       if (ret < 0) {
> +               dev_err(panel->dev, "failed to set panel on: %d\n", ret);
> +               goto poweroff;
> +       }
> +
> +       wuxga_nt->prepared = true;
> +
> +       return 0;
> +
> +poweroff:
> +       regulator_disable(wuxga_nt->supply);
> +
> +       return ret;
> +}
> +
> +static int wuxga_nt_panel_enable(struct drm_panel *panel)
> +{
> +       struct wuxga_nt_panel *wuxga_nt = to_wuxga_nt_panel(panel);
> +
> +       if (wuxga_nt->enabled)
> +               return 0;
> +
> +       if (wuxga_nt->backlight) {
> +               wuxga_nt->backlight->props.power = FB_BLANK_UNBLANK;
> +               wuxga_nt->backlight->props.state &= ~BL_CORE_FBBLANK;
> +               backlight_update_status(wuxga_nt->backlight);
> +       }
> +
> +       wuxga_nt->enabled = true;
> +
> +       return 0;
> +}
> +
> +static const struct drm_display_mode default_mode = {
> +       .clock = 164402,
> +       .hdisplay = 1920,
> +       .hsync_start = 1920 + 152,
> +       .hsync_end = 1920 + 152 + 52,
> +       .htotal = 1920 + 152 + 52 + 20,
> +       .vdisplay = 1200,
> +       .vsync_start = 1200 + 24,
> +       .vsync_end = 1200 + 24 + 6,
> +       .vtotal = 1200 + 24 + 6 + 48,
> +       .vrefresh = 60,
> +};
> +
> +static int wuxga_nt_panel_get_modes(struct drm_panel *panel)
> +{
> +       struct drm_display_mode *mode;
> +
> +       mode = drm_mode_duplicate(panel->drm, &default_mode);
> +       if (!mode) {
> +               dev_err(panel->drm->dev, "failed to add mode %ux%ux@%u\n",
> +                               default_mode.hdisplay, default_mode.vdisplay,
> +                               default_mode.vrefresh);
> +               return -ENOMEM;
> +       }
> +
> +       drm_mode_set_name(mode);
> +
> +       drm_mode_probed_add(panel->connector, mode);
> +
> +       panel->connector->display_info.width_mm = 217;
> +       panel->connector->display_info.height_mm = 136;
> +
> +       return 1;
> +}
> +
> +static const struct drm_panel_funcs wuxga_nt_panel_funcs = {
> +       .disable = wuxga_nt_panel_disable,
> +       .unprepare = wuxga_nt_panel_unprepare,
> +       .prepare = wuxga_nt_panel_prepare,
> +       .enable = wuxga_nt_panel_enable,
> +       .get_modes = wuxga_nt_panel_get_modes,
> +};
> +
> +static const struct of_device_id wuxga_nt_of_match[] = {
> +       { .compatible = "panasonic,vvx10f034n00", },
> +       { }
> +};
> +MODULE_DEVICE_TABLE(of, wuxga_nt_of_match);
> +
> +static int wuxga_nt_panel_add(struct wuxga_nt_panel *wuxga_nt)
> +{
> +       struct device *dev = &wuxga_nt->dsi->dev;
> +       struct device_node *np;
> +       int ret;
> +
> +       wuxga_nt->mode = &default_mode;
> +
> +       wuxga_nt->supply = devm_regulator_get(dev, "power");
> +       if (IS_ERR(wuxga_nt->supply))
> +               return PTR_ERR(wuxga_nt->supply);
> +
> +       np = of_parse_phandle(dev->of_node, "backlight", 0);
> +       if (np) {
> +               wuxga_nt->backlight = of_find_backlight_by_node(np);
> +               of_node_put(np);
> +
> +               if (!wuxga_nt->backlight)
> +                       return -EPROBE_DEFER;
> +       }
> +
> +       drm_panel_init(&wuxga_nt->base);
> +       wuxga_nt->base.funcs = &wuxga_nt_panel_funcs;
> +       wuxga_nt->base.dev = &wuxga_nt->dsi->dev;
> +
> +       ret = drm_panel_add(&wuxga_nt->base);
> +       if (ret < 0)
> +               goto put_backlight;
> +
> +       return 0;
> +
> +put_backlight:
> +       if (wuxga_nt->backlight)
> +               put_device(&wuxga_nt->backlight->dev);
> +
> +       return ret;
> +}
> +
> +static void wuxga_nt_panel_del(struct wuxga_nt_panel *wuxga_nt)
> +{
> +       if (wuxga_nt->base.dev)
> +               drm_panel_remove(&wuxga_nt->base);
> +
> +       if (wuxga_nt->backlight)
> +               put_device(&wuxga_nt->backlight->dev);
> +}
> +
> +static int wuxga_nt_panel_probe(struct mipi_dsi_device *dsi)
> +{
> +       struct wuxga_nt_panel *wuxga_nt;
> +       int ret;
> +
> +       dsi->lanes = 4;
> +       dsi->format = MIPI_DSI_FMT_RGB888;
> +       dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
> +                       MIPI_DSI_MODE_VIDEO_HSE |
> +                       MIPI_DSI_CLOCK_NON_CONTINUOUS |
> +                       MIPI_DSI_MODE_LPM;
> +
> +       wuxga_nt = devm_kzalloc(&dsi->dev, sizeof(*wuxga_nt), GFP_KERNEL);
> +       if (!wuxga_nt)
> +               return -ENOMEM;
> +
> +       mipi_dsi_set_drvdata(dsi, wuxga_nt);
> +
> +       wuxga_nt->dsi = dsi;
> +
> +       ret = wuxga_nt_panel_add(wuxga_nt);
> +       if (ret < 0)
> +               return ret;
> +
> +       return mipi_dsi_attach(dsi);
> +}
> +
> +static int wuxga_nt_panel_remove(struct mipi_dsi_device *dsi)
> +{
> +       struct wuxga_nt_panel *wuxga_nt = mipi_dsi_get_drvdata(dsi);
> +       int ret;
> +
> +       ret = wuxga_nt_panel_disable(&wuxga_nt->base);
> +       if (ret < 0)
> +               dev_err(&dsi->dev, "failed to disable panel: %d\n", ret);
> +
> +       ret = mipi_dsi_detach(dsi);
> +       if (ret < 0)
> +               dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret);
> +
> +       drm_panel_detach(&wuxga_nt->base);
> +       wuxga_nt_panel_del(wuxga_nt);
> +
> +       return 0;
> +}
> +
> +static void wuxga_nt_panel_shutdown(struct mipi_dsi_device *dsi)
> +{
> +       struct wuxga_nt_panel *wuxga_nt = mipi_dsi_get_drvdata(dsi);
> +
> +       wuxga_nt_panel_disable(&wuxga_nt->base);
> +}
> +
> +static struct mipi_dsi_driver wuxga_nt_panel_driver = {
> +       .driver = {
> +               .name = "panel-panasonic-vvx10f034n00",
> +               .of_match_table = wuxga_nt_of_match,
> +       },
> +       .probe = wuxga_nt_panel_probe,
> +       .remove = wuxga_nt_panel_remove,
> +       .shutdown = wuxga_nt_panel_shutdown,
> +};
> +module_mipi_dsi_driver(wuxga_nt_panel_driver);
> +
> +MODULE_AUTHOR("Werner Johansson <werner.johansson@...ymobile.com>");
> +MODULE_DESCRIPTION("Panasonic VVX10F034N00 Novatek NT1397-based WUXGA (1920x1200) video mode panel driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.3.2 (Apple Git-55)
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists