lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Thu, 3 Dec 2015 11:19:22 -0200
From:	Mauro Carvalho Chehab <mchehab@....samsung.com>
To:	Benoit Parrot <bparrot@...com>
Cc:	Hans Verkuil <hverkuil@...all.nl>, <linux-media@...r.kernel.org>,
	<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	Hans Verkuil <hans.verkuil@...co.com>
Subject: Re: [Patch v5 1/2] media: v4l: ti-vpe: Add CAL v4l2 camera capture
 driver

Em Wed, 18 Nov 2015 14:47:11 -0600
Benoit Parrot <bparrot@...com> escreveu:

> The Camera Adaptation Layer (CAL) is a block which consists of a dual
> port CSI2/MIPI camera capture engine.
> Port #0 can handle CSI2 camera connected to up to 4 data lanes.
> Port #1 can handle CSI2 camera connected to up to 2 data lanes.
> The driver implements the required API/ioctls to be V4L2 compliant.
> Driver supports the following:
>     - V4L2 API using DMABUF/MMAP buffer access based on videobuf2 api
>     - Asynchronous sensor sub device registration

Please see the comments I did for the git pull request. Additionally,
see below.

> 
> Signed-off-by: Benoit Parrot <bparrot@...com>
> Signed-off-by: Hans Verkuil <hans.verkuil@...co.com>
> ---
>  drivers/media/platform/Kconfig           |   12 +
>  drivers/media/platform/Makefile          |    2 +
>  drivers/media/platform/ti-vpe/Makefile   |    4 +
>  drivers/media/platform/ti-vpe/cal.c      | 2143 ++++++++++++++++++++++++++++++
>  drivers/media/platform/ti-vpe/cal_regs.h |  779 +++++++++++
>  5 files changed, 2940 insertions(+)
>  create mode 100644 drivers/media/platform/ti-vpe/cal.c
>  create mode 100644 drivers/media/platform/ti-vpe/cal_regs.h
> 
> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> index 0c53805dff0e..db052f5a627a 100644
> --- a/drivers/media/platform/Kconfig
> +++ b/drivers/media/platform/Kconfig
> @@ -120,6 +120,18 @@ source "drivers/media/platform/s5p-tv/Kconfig"
>  source "drivers/media/platform/am437x/Kconfig"
>  source "drivers/media/platform/xilinx/Kconfig"
>  
> +config VIDEO_TI_CAL
> +	tristate "TI CAL (Camera Adaptation Layer) driver"
> +	depends on VIDEO_DEV && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> +	depends on SOC_DRA7XX || COMPILE_TEST
> +	select VIDEOBUF2_DMA_CONTIG
> +	default n
> +	---help---
> +	  Support for the TI CAL (Camera Adaptation Layer) block
> +	  found on DRA72X SoC.
> +	  In TI Technical Reference Manual this module is referred as
> +	  Camera Interface Subsystem (CAMSS).
> +
>  endif # V4L_PLATFORM_DRIVERS
>  
>  menuconfig V4L_MEM2MEM_DRIVERS
> diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
> index efa0295af87b..028a7233096b 100644
> --- a/drivers/media/platform/Makefile
> +++ b/drivers/media/platform/Makefile
> @@ -18,6 +18,8 @@ obj-$(CONFIG_VIDEO_VIM2M)		+= vim2m.o
>  
>  obj-$(CONFIG_VIDEO_TI_VPE)		+= ti-vpe/
>  
> +obj-$(CONFIG_VIDEO_TI_CAL)		+= ti-vpe/
> +
>  obj-$(CONFIG_VIDEO_MX2_EMMAPRP)		+= mx2_emmaprp.o
>  obj-$(CONFIG_VIDEO_CODA) 		+= coda/
>  
> diff --git a/drivers/media/platform/ti-vpe/Makefile b/drivers/media/platform/ti-vpe/Makefile
> index be680f839e77..e236059a60ad 100644
> --- a/drivers/media/platform/ti-vpe/Makefile
> +++ b/drivers/media/platform/ti-vpe/Makefile
> @@ -3,3 +3,7 @@ obj-$(CONFIG_VIDEO_TI_VPE) += ti-vpe.o
>  ti-vpe-y := vpe.o sc.o csc.o vpdma.o
>  
>  ccflags-$(CONFIG_VIDEO_TI_VPE_DEBUG) += -DDEBUG
> +
> +obj-$(CONFIG_VIDEO_TI_CAL) += ti-cal.o
> +
> +ti-cal-y := cal.o
> diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
> new file mode 100644
> index 000000000000..61cd5b9bd8f6
> --- /dev/null
> +++ b/drivers/media/platform/ti-vpe/cal.c
> @@ -0,0 +1,2143 @@
> +/*
> + * TI CAL camera interface driver
> + *
> + * Copyright (c) 2015 Texas Instruments Inc.
> + * Benoit Parrot, <bparrot@...com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/ioctl.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/delay.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/slab.h>
> +#include <linux/videodev2.h>
> +#include <linux/of_device.h>
> +#include <linux/of_graph.h>
> +
> +#include <media/v4l2-of.h>
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-common.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-ioctl.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-fh.h>
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-common.h>
> +#include <media/videobuf2-core.h>
> +#include <media/videobuf2-dma-contig.h>
> +#include "cal_regs.h"
> +
> +#define CAL_MODULE_NAME "cal"
> +
> +#define MAX_WIDTH 1920
> +#define MAX_HEIGHT 1200
> +
> +#define CAL_VERSION "0.1.0"
> +
> +MODULE_DESCRIPTION("TI CAL driver");
> +MODULE_AUTHOR("Benoit Parrot, <bparrot@...com>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_VERSION(CAL_VERSION);
> +
> +static unsigned video_nr = -1;
> +module_param(video_nr, uint, 0644);
> +MODULE_PARM_DESC(video_nr, "videoX start number, -1 is autodetect");
> +
> +static unsigned debug;
> +module_param(debug, uint, 0644);
> +MODULE_PARM_DESC(debug, "activates debug info");
> +
> +/* timeperframe: min/max and default */
> +static const struct v4l2_fract
> +	tpf_default = {.numerator = 1001,	.denominator = 30000};
> +
> +#define cal_dbg(level, caldev, fmt, arg...)	\
> +		v4l2_dbg(level, debug, &caldev->v4l2_dev, fmt, ##arg)
> +#define cal_info(caldev, fmt, arg...)	\
> +		v4l2_info(&caldev->v4l2_dev, fmt, ##arg)
> +#define cal_err(caldev, fmt, arg...)	\
> +		v4l2_err(&caldev->v4l2_dev, fmt, ##arg)
> +
> +#define ctx_dbg(level, ctx, fmt, arg...)	\
> +		v4l2_dbg(level, debug, &ctx->v4l2_dev, fmt, ##arg)
> +#define ctx_info(ctx, fmt, arg...)	\
> +		v4l2_info(&ctx->v4l2_dev, fmt, ##arg)
> +#define ctx_err(ctx, fmt, arg...)	\
> +		v4l2_err(&ctx->v4l2_dev, fmt, ##arg)
> +
> +#define CAL_NUM_INPUT 1
> +#define CAL_NUM_CONTEXT 2
> +
> +/* ------------------------------------------------------------------
> + *	Basic structures
> + * ------------------------------------------------------------------
> + */
> +
> +struct cal_fmt {
> +	u32	fourcc;
> +	u32	code;
> +	u8	depth;
> +};
> +
> +static struct cal_fmt cal_formats[] = {
> +	{
> +		.fourcc		= V4L2_PIX_FMT_YUYV,
> +		.code		= MEDIA_BUS_FMT_YUYV8_2X8,
> +		.depth		= 16,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_UYVY,
> +		.code		= MEDIA_BUS_FMT_UYVY8_2X8,
> +		.depth		= 16,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_YVYU,
> +		.code		= MEDIA_BUS_FMT_YVYU8_2X8,
> +		.depth		= 16,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_VYUY,
> +		.code		= MEDIA_BUS_FMT_VYUY8_2X8,
> +		.depth		= 16,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_RGB565, /* gggbbbbb rrrrrggg */
> +		.code		= MEDIA_BUS_FMT_RGB565_2X8_LE,
> +		.depth		= 16,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_RGB565X, /* rrrrrggg gggbbbbb */
> +		.code		= MEDIA_BUS_FMT_RGB565_2X8_BE,
> +		.depth		= 16,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_RGB555, /* gggbbbbb arrrrrgg */
> +		.code		= MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE,
> +		.depth		= 16,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_RGB555X, /* arrrrrgg gggbbbbb */
> +		.code		= MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE,
> +		.depth		= 16,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_RGB24, /* rgb */
> +		.code		= MEDIA_BUS_FMT_RGB888_2X12_LE,
> +		.depth		= 24,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_BGR24, /* bgr */
> +		.code		= MEDIA_BUS_FMT_RGB888_2X12_BE,
> +		.depth		= 24,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_RGB32, /* argb */
> +		.code		= MEDIA_BUS_FMT_ARGB8888_1X32,
> +		.depth		= 32,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_SBGGR8,
> +		.code		= MEDIA_BUS_FMT_SBGGR8_1X8,
> +		.depth		= 8,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_SGBRG8,
> +		.code		= MEDIA_BUS_FMT_SGBRG8_1X8,
> +		.depth		= 8,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_SGRBG8,
> +		.code		= MEDIA_BUS_FMT_SGRBG8_1X8,
> +		.depth		= 8,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_SRGGB8,
> +		.code		= MEDIA_BUS_FMT_SRGGB8_1X8,
> +		.depth		= 8,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_SBGGR10,
> +		.code		= MEDIA_BUS_FMT_SBGGR10_1X10,
> +		.depth		= 16,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_SGBRG10,
> +		.code		= MEDIA_BUS_FMT_SGBRG10_1X10,
> +		.depth		= 16,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_SGRBG10,
> +		.code		= MEDIA_BUS_FMT_SGRBG10_1X10,
> +		.depth		= 16,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_SRGGB10,
> +		.code		= MEDIA_BUS_FMT_SRGGB10_1X10,
> +		.depth		= 16,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_SBGGR12,
> +		.code		= MEDIA_BUS_FMT_SBGGR12_1X12,
> +		.depth		= 16,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_SGBRG12,
> +		.code		= MEDIA_BUS_FMT_SGBRG12_1X12,
> +		.depth		= 16,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_SGRBG12,
> +		.code		= MEDIA_BUS_FMT_SGRBG12_1X12,
> +		.depth		= 16,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_SRGGB12,
> +		.code		= MEDIA_BUS_FMT_SRGGB12_1X12,
> +		.depth		= 16,
> +	},
> +};
> +
> +/*  Print Four-character-code (FOURCC) */
> +static char *fourcc_to_str(u32 fmt)
> +{
> +	static char code[5];
> +
> +	code[0] = (unsigned char)(fmt & 0xff);
> +	code[1] = (unsigned char)((fmt >> 8) & 0xff);
> +	code[2] = (unsigned char)((fmt >> 16) & 0xff);
> +	code[3] = (unsigned char)((fmt >> 24) & 0xff);
> +	code[4] = '\0';
> +
> +	return code;
> +}
> +
> +/* buffer for one video frame */
> +struct cal_buffer {
> +	/* common v4l buffer stuff -- must be first */
> +	struct vb2_v4l2_buffer	vb;
> +	struct list_head	list;
> +	const struct cal_fmt	*fmt;
> +};
> +
> +struct cal_dmaqueue {
> +	struct list_head	active;
> +
> +	/* Counters to control fps rate */
> +	int			frame;
> +	int			ini_jiffies;
> +};
> +
> +struct cm_data {
> +	void __iomem		*base;
> +	struct resource		*res;
> +
> +	unsigned int		camerrx_control;
> +
> +	struct platform_device *pdev;
> +};
> +
> +struct cc_data {
> +	void __iomem		*base;
> +	struct resource		*res;
> +
> +	struct platform_device *pdev;
> +};
> +
> +/*
> + * there is one cal_dev structure in the driver, it is shared by
> + * all instances.
> + */
> +struct cal_dev {
> +	int			irq;
> +	void __iomem		*base;
> +	struct resource		*res;
> +	struct platform_device	*pdev;
> +	struct v4l2_device	v4l2_dev;
> +
> +	struct cm_data		*cm;		/* Control Module handle */
> +
> +	struct cal_ctx		*ctx[CAL_NUM_CONTEXT];
> +};
> +
> +/*
> + * There is one cal_ctx structure for each camera core context.
> + */
> +struct cal_ctx {
> +	struct v4l2_device	v4l2_dev;
> +	struct v4l2_ctrl_handler ctrl_handler;
> +	struct video_device	vdev;
> +	struct v4l2_async_notifier notifier;
> +	struct v4l2_subdev	*sensor;
> +	struct v4l2_of_endpoint	endpoint;
> +
> +	struct v4l2_async_subdev asd;
> +	struct v4l2_async_subdev *asd_list[1];
> +
> +	struct v4l2_fh		fh;
> +	struct cal_dev		*dev;
> +	struct cc_data		*cc;
> +
> +	/* v4l2_ioctl mutex */
> +	struct mutex		mutex;
> +	/* v4l2 buffers lock */
> +	spinlock_t		slock;
> +
> +	/* Several counters */
> +	unsigned long		jiffies;
> +
> +	struct vb2_alloc_ctx	*alloc_ctx;
> +	struct cal_dmaqueue	vidq;
> +
> +	/* Input Number */
> +	int			input;
> +
> +	/* video capture */
> +	const struct cal_fmt	*fmt;
> +	/* Used to store current pixel format */
> +	struct v4l2_format		v_fmt;
> +	/* Used to store current mbus frame format */
> +	struct v4l2_mbus_framefmt	m_fmt;
> +
> +	/* Current subdev enumerated format */
> +	struct cal_fmt		*active_fmt[ARRAY_SIZE(cal_formats)];
> +	int			num_active_fmt;
> +
> +	struct v4l2_fract	timeperframe;
> +	unsigned int		sequence;
> +	unsigned int		external_rate;
> +	struct vb2_queue	vb_vidq;
> +	unsigned int		seq_count;
> +	unsigned int		csi2_port;
> +	unsigned int		virtual_channel;
> +
> +	/* Pointer pointing to current v4l2_buffer */
> +	struct cal_buffer	*cur_frm;
> +	/* Pointer pointing to next v4l2_buffer */
> +	struct cal_buffer	*next_frm;
> +};
> +
> +static const struct cal_fmt *find_format_by_pix(struct cal_ctx *ctx,
> +						u32 pixelformat)
> +{
> +	const struct cal_fmt *fmt;
> +	unsigned int k;
> +
> +	for (k = 0; k < ctx->num_active_fmt; k++) {
> +		fmt = ctx->active_fmt[k];
> +		if (fmt->fourcc == pixelformat)
> +			return fmt;
> +	}
> +
> +	return NULL;
> +}
> +
> +static const struct cal_fmt *find_format_by_code(struct cal_ctx *ctx,
> +						 u32 code)
> +{
> +	const struct cal_fmt *fmt;
> +	unsigned int k;
> +
> +	for (k = 0; k < ctx->num_active_fmt; k++) {
> +		fmt = ctx->active_fmt[k];
> +		if (fmt->code == code)
> +			return fmt;
> +	}
> +
> +	return NULL;
> +}
> +
> +static inline struct cal_ctx *notifier_to_ctx(struct v4l2_async_notifier *n)
> +{
> +	return container_of(n, struct cal_ctx, notifier);
> +}
> +
> +/* register field read/write helpers */
> +static inline int get_field(u32 value, u32 mask, int shift)
> +{
> +	return (value & (mask << shift)) >> shift;
> +}

Please use the macros defined at bitmap.h instead of writing your own
version of it.


> +
> +static inline void write_field(u32 *valp, u32 field, u32 mask, int shift)
> +{
> +	u32 val = *valp;
> +
> +	val &= ~(mask << shift);
> +	val |= (field & mask) << shift;
> +	*valp = val;
> +}
> +
> +static inline u32 cal_read(struct cal_dev *dev, int offset)
> +{
> +	return ioread32(dev->base + offset);
> +}
> +
> +static inline void cal_write(struct cal_dev *dev, int offset, u32 value)
> +{
> +	iowrite32(value, dev->base + offset);
> +}
> +
> +static inline int
> +cal_read_field(struct cal_dev *dev, int offset, u32 mask, int shift)
> +{
> +	return get_field(cal_read(dev, offset), mask, shift);
> +}
> +
> +static inline void cal_write_field(struct cal_dev *dev, int offset, u32 field,
> +				   u32 mask, int shift)
> +{
> +	u32 val = cal_read(dev, offset);
> +
> +	write_field(&val, field, mask, shift);
> +
> +	cal_write(dev, offset, val);
> +}
> +
> +/*
> + * Control Module block access
> + */
> +static struct cm_data *cm_create(struct cal_dev *dev)
> +{
> +	struct platform_device *pdev = dev->pdev;
> +	struct cm_data *cm;
> +
> +	cal_dbg(3, dev, "cm_create\n");
> +
> +	cm = devm_kzalloc(&pdev->dev, sizeof(*cm), GFP_KERNEL);
> +	if (!cm)
> +		return ERR_PTR(-ENOMEM);
> +
> +	cm->res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> +						"camerrx_control");
> +	cm->base = devm_ioremap_resource(&pdev->dev, cm->res);
> +	if (IS_ERR(cm->base)) {
> +		cal_err(dev, "failed to ioremap\n");
> +		return cm->base;
> +	}
> +
> +	cal_dbg(1, dev, "ioresource %s at %pa - %pa\n",
> +		cm->res->name, &cm->res->start, &cm->res->end);
> +
> +	return cm;
> +}
> +
> +static inline u32 cm_read(struct cm_data *dev, int offset)
> +{
> +	return ioread32(dev->base + offset);
> +}
> +
> +static inline void cm_write(struct cm_data *dev, int offset, u32 value)
> +{
> +	iowrite32(value, dev->base + offset);
> +}
> +
> +static inline void cm_write_field(struct cm_data *dev, int offset, u32 field,
> +				  u32 mask, int shift)
> +{
> +	u32 val = cm_read(dev, offset);
> +
> +	write_field(&val, field, mask, shift);
> +
> +	cm_write(dev, offset, val);
> +}
> +
> +static void camerarx_phy_enable(struct cal_ctx *ctx)
> +{
> +	u32 val;
> +
> +	ctx_dbg(3, ctx, "%s\n", __func__);
> +
> +	if (!ctx->dev->cm->base) {
> +		ctx_err(ctx, "cm not mapped\n");
> +		return;
> +	}
> +
> +	val = cm_read(ctx->dev->cm, CM_CTRL_CORE_CAMERRX_CONTROL);
> +	if (ctx->csi2_port == 1) {
> +		write_field(&val, 1, CM_CAMERRX_CTRL_CSI0_CTRLCLKEN_MASK,
> +			    CM_CAMERRX_CTRL_CSI0_CTRLCLKEN_SHIFT);
> +		write_field(&val, 0, CM_CAMERRX_CTRL_CSI0_CAMMODE_MASK,
> +			    CM_CAMERRX_CTRL_CSI0_CAMMODE_SHIFT);
> +		/* enable all lanes by default */
> +		write_field(&val, 0xf, CM_CAMERRX_CTRL_CSI0_LANEENABLE_MASK,
> +			    CM_CAMERRX_CTRL_CSI0_LANEENABLE_SHIFT);
> +		write_field(&val, 1, CM_CAMERRX_CTRL_CSI0_MODE_MASK,
> +			    CM_CAMERRX_CTRL_CSI0_MODE_SHIFT);
> +	} else if (ctx->csi2_port == 2) {
> +		write_field(&val, 1, CM_CAMERRX_CTRL_CSI1_CTRLCLKEN_MASK,
> +			    CM_CAMERRX_CTRL_CSI0_CTRLCLKEN_SHIFT);
> +		write_field(&val, 0, CM_CAMERRX_CTRL_CSI1_CAMMODE_MASK,
> +			    CM_CAMERRX_CTRL_CSI0_CAMMODE_SHIFT);
> +		/* enable all lanes by default */
> +		write_field(&val, 0x3, CM_CAMERRX_CTRL_CSI1_LANEENABLE_MASK,
> +			    CM_CAMERRX_CTRL_CSI0_LANEENABLE_SHIFT);
> +		write_field(&val, 1, CM_CAMERRX_CTRL_CSI1_MODE_MASK,
> +			    CM_CAMERRX_CTRL_CSI0_MODE_SHIFT);
> +	}
> +	cm_write(ctx->dev->cm, CM_CTRL_CORE_CAMERRX_CONTROL, val);
> +}
> +
> +static void camerarx_phy_disable(struct cal_ctx *ctx)
> +{
> +	ctx_dbg(3, ctx, "%s\n", __func__);
> +
> +	if (!ctx->dev->cm->base) {
> +		ctx_err(ctx, "cm not mapped\n");
> +		return;
> +	}
> +
> +	if (ctx->csi2_port == 1)
> +		cm_write_field(ctx->dev->cm,
> +			       CM_CTRL_CORE_CAMERRX_CONTROL,
> +			       0x0,
> +			       CM_CAMERRX_CTRL_CSI0_CTRLCLKEN_MASK,
> +			       CM_CAMERRX_CTRL_CSI0_CTRLCLKEN_SHIFT);
> +	else if (ctx->csi2_port == 2)
> +		cm_write_field(ctx->dev->cm,
> +			       CM_CTRL_CORE_CAMERRX_CONTROL,
> +			       0x0,
> +			       CM_CAMERRX_CTRL_CSI1_CTRLCLKEN_MASK,
> +			       CM_CAMERRX_CTRL_CSI1_CTRLCLKEN_SHIFT);
> +}
> +
> +/*
> + * Camera Instance access block
> + */
> +static struct cc_data *cc_create(struct cal_dev *dev, unsigned int core)
> +{
> +	struct platform_device *pdev = dev->pdev;
> +	struct cc_data *cc;
> +
> +	cal_dbg(3, dev, "cc_create\n");
> +
> +	cc = devm_kzalloc(&pdev->dev, sizeof(*cc), GFP_KERNEL);
> +	if (!cc)
> +		return ERR_PTR(-ENOMEM);
> +
> +	cc->res = platform_get_resource_byname(pdev,
> +					       IORESOURCE_MEM,
> +					       (core == 0) ?
> +						"cal_rx_core0" :
> +						"cal_rx_core1");
> +	cc->base = devm_ioremap_resource(&pdev->dev, cc->res);
> +	if (IS_ERR(cc->base)) {
> +		cal_err(dev, "failed to ioremap\n");
> +		return cc->base;
> +	}
> +
> +	cal_dbg(1, dev, "ioresource %s at %pa - %pa\n",
> +		cc->res->name, &cc->res->start, &cc->res->end);
> +
> +	return cc;
> +}
> +
> +static inline u32 cc_read(struct cc_data *dev, int offset)
> +{
> +	return ioread32(dev->base + offset);
> +}
> +
> +static inline void cc_write(struct cc_data *dev, int offset, u32 value)
> +{
> +	iowrite32(value, dev->base + offset);
> +}
> +
> +/*
> + * Get Revision and HW info
> + */
> +static void cal_get_hwinfo(struct cal_dev *dev)
> +{
> +	u32 revision = 0;
> +	u32 hwinfo = 0;
> +
> +	revision = cal_read(dev, CAL_HL_REVISION);
> +	cal_dbg(3, dev, "CAL_HL_REVISION = 0x%08x (expecting 0x40000200)\n",
> +		revision);
> +
> +	hwinfo = cal_read(dev, CAL_HL_HWINFO);
> +	cal_dbg(3, dev, "CAL_HL_HWINFO = 0x%08x (expecting 0xA3C90469)\n",
> +		hwinfo);
> +}
> +
> +static void cal_quickdump_regs(struct cal_dev *dev)
> +{
> +	cal_info(dev, "CAL Registers @ 0x%pa:\n", &dev->res->start);
> +	print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 4,
> +		       dev->base, resource_size(dev->res), false);
> +
> +	if (!dev->ctx[0]) {
> +		cal_info(dev, "CSI2 Core 0 Registers @ %pa:\n",
> +			 &dev->ctx[0]->cc->res->start);
> +		print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 4,
> +			       dev->ctx[0]->cc->base,
> +			       resource_size(dev->ctx[0]->cc->res),
> +			       false);
> +	}
> +
> +	if (!dev->ctx[1]) {
> +		cal_info(dev, "CSI2 Core 1 Registers @ %pa:\n",
> +			 &dev->ctx[1]->cc->res->start);
> +		print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 4,
> +			       dev->ctx[1]->cc->base,
> +			       resource_size(dev->ctx[1]->cc->res),
> +			       false);
> +	}
> +
> +	cal_info(dev, "CAMERRX_Control Registers @ %pa:\n",
> +		 &dev->cm->res->start);
> +	print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 4,
> +		       dev->cm->base,
> +		       resource_size(dev->cm->res), false);
> +}
> +
> +/*
> + * Enable the expected IRQ sources
> + */
> +static void enable_irqs(struct cal_ctx *ctx)
> +{
> +	/* Enable IRQ_WDMA_END 0/1 */
> +	cal_write_field(ctx->dev,
> +			CAL_HL_IRQENABLE_SET(2),
> +			CAL_HL_IRQ_ENABLE,
> +			CAL_HL_IRQ_MASK(ctx->csi2_port),
> +			CAL_HL_IRQ_SHIFT(ctx->csi2_port));
> +	/* Enable IRQ_WDMA_START 0/1 */
> +	cal_write_field(ctx->dev,
> +			CAL_HL_IRQENABLE_SET(3),
> +			CAL_HL_IRQ_ENABLE,
> +			CAL_HL_IRQ_MASK(ctx->csi2_port),
> +			CAL_HL_IRQ_SHIFT(ctx->csi2_port));
> +	/* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */
> +	cal_write(ctx->dev, CAL_CSI2_VC_IRQENABLE(1), 0xFF000000);
> +}
> +
> +static void disable_irqs(struct cal_ctx *ctx)
> +{
> +	/* Disable IRQ_WDMA_END 0/1 */
> +	cal_write_field(ctx->dev,
> +			CAL_HL_IRQENABLE_CLR(2),
> +			CAL_HL_IRQ_CLEAR,
> +			CAL_HL_IRQ_MASK(ctx->csi2_port),
> +			CAL_HL_IRQ_SHIFT(ctx->csi2_port));
> +	/* Disable IRQ_WDMA_START 0/1 */
> +	cal_write_field(ctx->dev,
> +			CAL_HL_IRQENABLE_CLR(3),
> +			CAL_HL_IRQ_ENABLE,
> +			CAL_HL_IRQ_MASK(ctx->csi2_port),
> +			CAL_HL_IRQ_SHIFT(ctx->csi2_port));
> +	/* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */
> +	cal_write(ctx->dev, CAL_CSI2_VC_IRQENABLE(1), 0);
> +}
> +
> +static void csi2_init(struct cal_ctx *ctx)
> +{
> +	u32 val;
> +
> +	ctx_dbg(3, ctx, "%s\n", __func__);
> +
> +	val = cal_read(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port));
> +	write_field(&val, CAL_GEN_ENABLE,
> +		    CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK,
> +		    CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_SHIFT);
> +	write_field(&val, CAL_GEN_ENABLE,
> +		    CAL_CSI2_TIMING_STOP_STATE_X16_IO1_MASK,
> +		    CAL_CSI2_TIMING_STOP_STATE_X16_IO1_SHIFT);
> +	write_field(&val, CAL_GEN_DISABLE,
> +		    CAL_CSI2_TIMING_STOP_STATE_X4_IO1_MASK,
> +		    CAL_CSI2_TIMING_STOP_STATE_X4_IO1_SHIFT);
> +	write_field(&val, 407, CAL_CSI2_TIMING_STOP_STATE_COUNTER_IO1_MASK,
> +		    CAL_CSI2_TIMING_STOP_STATE_COUNTER_IO1_SHIFT);
> +	cal_write(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port), val);
> +	ctx_dbg(3, ctx, "CAL_CSI2_TIMING(%d) = 0x%08x\n", ctx->csi2_port,
> +		cal_read(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port)));
> +
> +	val = cal_read(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port));
> +	write_field(&val, CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_OPERATIONAL,
> +		    CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_MASK,
> +		    CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_SHIFT);
> +	write_field(&val, CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_ON,
> +		    CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_MASK,
> +		    CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_SHIFT);
> +	cal_write(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port), val);

> +	while (cal_read_field(ctx->dev,
> +			      CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port),
> +			      CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_MASK,
> +			      CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_SHIFT) !=
> +	       CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_STATE_ON)
> +		;

The above code seems risky, as it could be doing an endless loop
that would starve the CPU.

You should, instead, use a wait queue or some other logic that would
not keep the CPU on some endless loop if something bad happens.

> +	ctx_dbg(3, ctx, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x\n", ctx->csi2_port,
> +		cal_read(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port)));
> +
> +	val = cal_read(ctx->dev, CAL_CTRL);
> +	write_field(&val, CAL_CTRL_BURSTSIZE_BURST128,
> +		    CAL_CTRL_BURSTSIZE_MASK, CAL_CTRL_BURSTSIZE_SHIFT);
> +	write_field(&val, 0xF,
> +		    CAL_CTRL_TAGCNT_MASK, CAL_CTRL_TAGCNT_SHIFT);
> +	write_field(&val, CAL_CTRL_POSTED_WRITES_NONPOSTED,
> +		    CAL_CTRL_POSTED_WRITES_MASK, CAL_CTRL_POSTED_WRITES_SHIFT);
> +	write_field(&val, 0xFF,
> +		    CAL_CTRL_MFLAGL_MASK, CAL_CTRL_MFLAGL_SHIFT);
> +	write_field(&val, 0xFF,
> +		    CAL_CTRL_MFLAGH_MASK, CAL_CTRL_MFLAGH_SHIFT);
> +	cal_write(ctx->dev, CAL_CTRL, val);
> +	ctx_dbg(3, ctx, "CAL_CTRL = 0x%08x\n", cal_read(ctx->dev, CAL_CTRL));
> +}
> +
> +static void csi2_lane_config(struct cal_ctx *ctx)
> +{
> +	u32 val = cal_read(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port));
> +	u32 lane_shift = CAL_CSI2_COMPLEXIO_CFG_CLOCK_POSITION_SHIFT;
> +	u32 lane_mask = CAL_CSI2_COMPLEXIO_CFG_CLOCK_POSITION_MASK;
> +	u32 polarity_mask = CAL_CSI2_COMPLEXIO_CFG_CLOCK_POL_MASK;
> +	struct v4l2_of_bus_mipi_csi2 *mipi_csi2 = &ctx->endpoint.bus.mipi_csi2;
> +	int lane;
> +
> +	ctx_dbg(3, ctx, "%s\n", __func__);
> +
> +	write_field(&val, mipi_csi2->clock_lane + 1,
> +		    lane_mask, lane_shift);
> +	write_field(&val, mipi_csi2->lane_polarities[0],
> +		    polarity_mask, lane_shift + 3);
> +	for (lane = 0; lane < mipi_csi2->num_data_lanes; lane++) {
> +		/*
> +		 * Every lane are one nibble apart starting with the
> +		 * clock followed by the data lanes so shift incements by 4.
> +		 */
> +		lane_shift += 4;
> +		write_field(&val, mipi_csi2->data_lanes[lane] + 1,
> +			    lane_mask, lane_shift);
> +		write_field(&val, mipi_csi2->lane_polarities[lane + 1],
> +			    polarity_mask, lane_shift + 3);
> +	}
> +	cal_write(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port), val);
> +	ctx_dbg(3, ctx, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x\n",
> +		ctx->csi2_port, val);
> +}
> +
> +static void csi2_ppi_enable(struct cal_ctx *ctx)
> +{
> +	ctx_dbg(3, ctx, "%s\n", __func__);
> +
> +	cal_write_field(ctx->dev,
> +			CAL_CSI2_PPI_CTRL(ctx->csi2_port),
> +			CAL_GEN_ENABLE,
> +			CAL_CSI2_PPI_CTRL_IF_EN_MASK,
> +			CAL_CSI2_PPI_CTRL_IF_EN_SHIFT);
> +}
> +
> +static void csi2_ppi_disable(struct cal_ctx *ctx)
> +{
> +	ctx_dbg(3, ctx, "%s\n", __func__);
> +
> +	cal_write_field(ctx->dev,
> +			CAL_CSI2_PPI_CTRL(ctx->csi2_port),
> +			CAL_GEN_DISABLE,
> +			CAL_CSI2_PPI_CTRL_IF_EN_MASK,
> +			CAL_CSI2_PPI_CTRL_IF_EN_SHIFT);
> +}
> +
> +static void csi2_ctx_config(struct cal_ctx *ctx)
> +{
> +	u32 val;
> +
> +	ctx_dbg(3, ctx, "%s\n", __func__);
> +
> +	val = cal_read(ctx->dev, CAL_CSI2_CTX0(ctx->csi2_port));
> +	write_field(&val, ctx->csi2_port, CAL_CSI2_CTX_CPORT_MASK,
> +		    CAL_CSI2_CTX_CPORT_SHIFT);
> +	/* DT type: MIPI CSI-2 Specs
> +	 *     1: All DT filter is disabled
> +	 *  0x24: RGB888 1 pixel  = 3 bytes
> +	 *  0x2B: RAW10  4 pixels = 5 bytes
> +	 *  0x2A: RAW8   1 pixel  = 1 byte
> +	 *  0x1E: YUV422 2 pixels = 4 bytes
> +	 */

The comment is violating the Linux CodingStyle for multi-line
comments.

> +	write_field(&val, 0x1, CAL_CSI2_CTX_DT_MASK,
> +		    CAL_CSI2_CTX_DT_SHIFT);
> +	/* Virtual Channel from the CSI2 sensor usually 0! */
> +	write_field(&val, ctx->virtual_channel, CAL_CSI2_CTX_VC_MASK,
> +		    CAL_CSI2_CTX_VC_SHIFT);
> +	/* NUM_LINES_PER_FRAME => 0 means we don't know */
> +	write_field(&val, 0, CAL_CSI2_CTX_LINES_MASK,
> +		    CAL_CSI2_CTX_LINES_SHIFT);
> +	write_field(&val, CAL_CSI2_CTX_ATT_PIX, CAL_CSI2_CTX_ATT_MASK,
> +		    CAL_CSI2_CTX_ATT_SHIFT);
> +	cal_write_field(ctx->dev,
> +			CAL_CSI2_CTX0(ctx->csi2_port),
> +			CAL_CSI2_CTX_PACK_MODE_LINE,
> +			CAL_CSI2_CTX_PACK_MODE_MASK,
> +			CAL_CSI2_CTX_PACK_MODE_SHIFT);
> +	write_field(&val, CAL_CSI2_CTX_PACK_MODE_LINE,
> +		    CAL_CSI2_CTX_PACK_MODE_MASK, CAL_CSI2_CTX_PACK_MODE_SHIFT);
> +	cal_write(ctx->dev, CAL_CSI2_CTX0(ctx->csi2_port), val);
> +	ctx_dbg(3, ctx, "CAL_CSI2_CTX0(%d) = 0x%08x\n", ctx->csi2_port,
> +		cal_read(ctx->dev, CAL_CSI2_CTX0(ctx->csi2_port)));
> +}
> +
> +static void pix_proc_config(struct cal_ctx *ctx)
> +{
> +	u32 val;
> +
> +	ctx_dbg(3, ctx, "%s\n", __func__);
> +
> +	val = cal_read(ctx->dev, CAL_PIX_PROC(ctx->csi2_port));
> +	write_field(&val, CAL_PIX_PROC_EXTRACT_B8, CAL_PIX_PROC_EXTRACT_MASK,
> +		    CAL_PIX_PROC_EXTRACT_SHIFT);
> +	write_field(&val, CAL_PIX_PROC_DPCMD_BYPASS, CAL_PIX_PROC_DPCMD_MASK,
> +		    CAL_PIX_PROC_DPCMD_SHIFT);
> +	write_field(&val, CAL_PIX_PROC_DPCME_BYPASS, CAL_PIX_PROC_DPCME_MASK,
> +		    CAL_PIX_PROC_DPCME_SHIFT);
> +	write_field(&val, CAL_PIX_PROC_PACK_B8, CAL_PIX_PROC_PACK_MASK,
> +		    CAL_PIX_PROC_PACK_SHIFT);
> +	write_field(&val, ctx->csi2_port, CAL_PIX_PROC_CPORT_MASK,
> +		    CAL_PIX_PROC_CPORT_SHIFT);
> +	cal_write_field(ctx->dev,
> +			CAL_PIX_PROC(ctx->csi2_port),
> +			CAL_GEN_ENABLE,
> +			CAL_PIX_PROC_EN_MASK,
> +			CAL_PIX_PROC_EN_SHIFT);
> +	write_field(&val, CAL_GEN_ENABLE, CAL_PIX_PROC_EN_MASK,
> +		    CAL_PIX_PROC_EN_SHIFT);
> +	cal_write(ctx->dev, CAL_PIX_PROC(ctx->csi2_port), val);
> +	ctx_dbg(3, ctx, "CAL_PIX_PROC(%d) = 0x%08x\n", ctx->csi2_port,
> +		cal_read(ctx->dev, CAL_PIX_PROC(ctx->csi2_port)));
> +}
> +
> +#define bytes_per_line(pixel, bpp) (ALIGN(pixel * bpp, 16))

Better to move the macro to the beginning of the file,

> +
> +static void cal_wr_dma_config(struct cal_ctx *ctx,
> +			      unsigned int width)
> +{
> +	u32 val;
> +
> +	ctx_dbg(3, ctx, "%s\n", __func__);
> +
> +	val = cal_read(ctx->dev, CAL_WR_DMA_CTRL(ctx->csi2_port));
> +	write_field(&val, ctx->csi2_port, CAL_WR_DMA_CTRL_CPORT_MASK,
> +		    CAL_WR_DMA_CTRL_CPORT_SHIFT);
> +	write_field(&val, CAL_WR_DMA_CTRL_DTAG_PIX_DAT,
> +		    CAL_WR_DMA_CTRL_DTAG_MASK, CAL_WR_DMA_CTRL_DTAG_SHIFT);
> +	write_field(&val, CAL_WR_DMA_CTRL_MODE_CONST,
> +		    CAL_WR_DMA_CTRL_MODE_MASK, CAL_WR_DMA_CTRL_MODE_SHIFT);
> +	write_field(&val, CAL_WR_DMA_CTRL_PATTERN_LINEAR,
> +		    CAL_WR_DMA_CTRL_PATTERN_MASK,
> +		    CAL_WR_DMA_CTRL_PATTERN_SHIFT);
> +	write_field(&val, CAL_GEN_ENABLE,
> +		    CAL_WR_DMA_CTRL_STALL_RD_MASK,
> +		    CAL_WR_DMA_CTRL_STALL_RD_SHIFT);
> +	cal_write(ctx->dev, CAL_WR_DMA_CTRL(ctx->csi2_port), val);
> +	ctx_dbg(3, ctx, "CAL_WR_DMA_CTRL(%d) = 0x%08x\n", ctx->csi2_port,
> +		cal_read(ctx->dev, CAL_WR_DMA_CTRL(ctx->csi2_port)));
> +
> +	/*
> +	 * width/16 not sure but giving it a whirl.
> +	 * zero does not work right
> +	 */
> +	cal_write_field(ctx->dev,
> +			CAL_WR_DMA_OFST(ctx->csi2_port),
> +			(width / 16),
> +			CAL_WR_DMA_OFST_MASK,
> +			CAL_WR_DMA_OFST_SHIFT);
> +	ctx_dbg(3, ctx, "CAL_WR_DMA_OFST(%d) = 0x%08x\n", ctx->csi2_port,
> +		cal_read(ctx->dev, CAL_WR_DMA_OFST(ctx->csi2_port)));
> +
> +	val = cal_read(ctx->dev, CAL_WR_DMA_XSIZE(ctx->csi2_port));
> +	/* 64 bit word means no skipping */
> +	write_field(&val, 0, CAL_WR_DMA_XSIZE_XSKIP_MASK,
> +		    CAL_WR_DMA_XSIZE_XSKIP_SHIFT);
> +	/*
> +	 * (width*8)/64 this should be size of an entire line
> +	 * in 64bit word but 0 means all data until the end
> +	 * is detected automagically
> +	 */
> +	write_field(&val, (width / 8), CAL_WR_DMA_XSIZE_MASK,
> +		    CAL_WR_DMA_XSIZE_SHIFT);
> +	cal_write(ctx->dev, CAL_WR_DMA_XSIZE(ctx->csi2_port), val);
> +	ctx_dbg(3, ctx, "CAL_WR_DMA_XSIZE(%d) = 0x%08x\n", ctx->csi2_port,
> +		cal_read(ctx->dev, CAL_WR_DMA_XSIZE(ctx->csi2_port)));
> +}
> +
> +static void cal_wr_dma_addr(struct cal_ctx *ctx, unsigned int dmaaddr)
> +{
> +	cal_write(ctx->dev, CAL_WR_DMA_ADDR(ctx->csi2_port), dmaaddr);
> +}
> +
> +/*
> + * TCLK values are OK at their reset values
> + */
> +#define TCLK_TERM	0
> +#define TCLK_MISS	1
> +#define TCLK_SETTLE	14
> +#define THS_SETTLE	15
> +
> +static void csi2_phy_config(struct cal_ctx *ctx)
> +{
> +	unsigned int reg0, reg1;
> +	unsigned int ths_term, ths_settle;
> +
> +	ctx_dbg(3, ctx, "%s\n", __func__);
> +
> +#ifdef LEGACY_CSI2PHY_FORMULA

Why do you need a define here? Where such symbol is defined?

If there's a good reason for the ifdef, then you would likely need to
add it at Kconfig.

Also, if such option is really required, IMO, the best would be to
split the part of the code inside the ifdefs into two separate 
inline implementation at the header file and put the #ifdef there,
as having ifdefs inside the code makes it harder to review.

> +	{
> +	int csi2_ddrclk_khz;

Argh! it sucks to open a block here just to avoid a gcc warning
for an otherwise crap coding.

> +
> +	csi2_ddrclk_khz = ctx->external_rate / 1000
> +		/ (2 * ctx->endpoint.bus.mipi_csi2.num_data_lanes)
> +		* ctx->fmt->depth;
> +
> +	/*
> +	 * THS_TERM: Programmed value = ceil(12.5 ns/DDRClk period) - 1.
> +	 * THS_SETTLE: Programmed value = ceil(90 ns/DDRClk period) + 3.
> +	 */
> +	ths_term = DIV_ROUND_UP(25 * csi2_ddrclk_khz, 2000000) - 1;
> +	ths_settle = DIV_ROUND_UP(90 * csi2_ddrclk_khz, 1000000) + 3;
> +	}
> +#else
> +	{
> +	unsigned int ddrclkperiod_us;

Same here.

> +
> +	/*
> +	 * THS_TERM: Programmed value = floor(20 ns/DDRClk period) - 2.
> +	 */
> +	ddrclkperiod_us = ctx->external_rate / 2000000;
> +	ddrclkperiod_us = 1000000 / ddrclkperiod_us;
> +	ctx_dbg(1, ctx, "ddrclkperiod_us: %d\n", ddrclkperiod_us);
> +
> +	ths_term = 20000 / ddrclkperiod_us;
> +	ths_term = (ths_term >= 2) ? ths_term - 2 : ths_term;
> +	ctx_dbg(1, ctx, "ths_term: %d (0x%02x)\n", ths_term, ths_term);
> +
> +	/*
> +	 * THS_SETTLE: Programmed value = floor(176.3 ns/CtrlClk period) - 1.
> +	 *	Since CtrlClk is fixed at 96Mhz then we get
> +	 *	ths_settle = floor(176.3 / 10.416) - 1 = 15
> +	 * If we ever switch to a dynamic clock then this code might be useful
> +	 *
> +	 * unsigned int ctrlclkperiod_us;
> +	 * ctrlclkperiod_us = 96000000 / 1000000;
> +	 * ctrlclkperiod_us = 1000000 / ctrlclkperiod_us;
> +	 * ctx_dbg(1, ctx, "ctrlclkperiod_us: %d\n", ctrlclkperiod_us);
> +
> +	 * ths_settle = 176300  / ctrlclkperiod_us;
> +	 * ths_settle = (ths_settle > 1) ? ths_settle - 1 : ths_settle;
> +	 */
> +
> +	ths_settle = THS_SETTLE;
> +	ctx_dbg(1, ctx, "ths_settle: %d (0x%02x)\n", ths_settle, ths_settle);
> +	}
> +#endif
> +	reg0 = cc_read(ctx->cc, CAL_CSI2_PHY_REG0);
> +	write_field(&reg0, CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_DISABLE,
> +		    CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_MASK,
> +		    CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_SHIFT);
> +	write_field(&reg0, ths_term,
> +		    CAL_CSI2_PHY_REG0_THS_TERM_MASK,
> +		    CAL_CSI2_PHY_REG0_THS_TERM_SHIFT);
> +	write_field(&reg0, ths_settle,
> +		    CAL_CSI2_PHY_REG0_THS_SETTLE_MASK,
> +		    CAL_CSI2_PHY_REG0_THS_SETTLE_SHIFT);
> +
> +	ctx_dbg(1, ctx, "CSI2_%d_REG0 = 0x%08x\n", (ctx->csi2_port - 1), reg0);
> +	cc_write(ctx->cc, CAL_CSI2_PHY_REG0, reg0);
> +
> +	reg1 = cc_read(ctx->cc, CAL_CSI2_PHY_REG1);
> +	write_field(&reg1, TCLK_TERM,
> +		    CAL_CSI2_PHY_REG1_TCLK_TERM_MASK,
> +		    CAL_CSI2_PHY_REG1_TCLK_TERM_SHIFT);
> +	write_field(&reg1, 0xb8,
> +		    CAL_CSI2_PHY_REG1_DPHY_HS_SYNC_PATTERN_MASK,
> +		    CAL_CSI2_PHY_REG1_DPHY_HS_SYNC_PATTERN_SHIFT);
> +	write_field(&reg1, TCLK_MISS,
> +		    CAL_CSI2_PHY_REG1_CTRLCLK_DIV_FACTOR_MASK,
> +		    CAL_CSI2_PHY_REG1_CTRLCLK_DIV_FACTOR_SHIFT);
> +	write_field(&reg1, TCLK_SETTLE,
> +		    CAL_CSI2_PHY_REG1_TCLK_SETTLE_MASK,
> +		    CAL_CSI2_PHY_REG1_TCLK_SETTLE_SHIFT);
> +
> +	ctx_dbg(1, ctx, "CSI2_%d_REG1 = 0x%08x\n", (ctx->csi2_port - 1), reg1);
> +	cc_write(ctx->cc, CAL_CSI2_PHY_REG1, reg1);
> +}
> +
> +static int cal_get_external_info(struct cal_ctx *ctx)
> +{
> +	struct v4l2_ctrl *ctrl;
> +
> +	ctx_dbg(3, ctx, "%s\n", __func__);
> +
> +	ctrl = v4l2_ctrl_find(ctx->sensor->ctrl_handler, V4L2_CID_PIXEL_RATE);
> +	if (!ctrl) {
> +		ctx_err(ctx, "no pixel rate control in subdev: %s\n",
> +			ctx->sensor->name);
> +		return -EPIPE;
> +	}
> +
> +	ctx->external_rate = v4l2_ctrl_g_ctrl_int64(ctrl);
> +	ctx_dbg(3, ctx, "sensor Pixel Rate: %d\n", ctx->external_rate);
> +
> +	return 0;
> +}
> +
> +static inline void cal_schedule_next_buffer(struct cal_ctx *ctx)
> +{
> +	struct cal_dmaqueue *dma_q = &ctx->vidq;
> +	struct cal_buffer *buf;
> +	unsigned long addr;
> +
> +	buf = list_entry(dma_q->active.next, struct cal_buffer, list);
> +	ctx->next_frm = buf;
> +	list_del(&buf->list);
> +
> +	addr = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0);
> +	cal_wr_dma_addr(ctx, addr);
> +}
> +
> +static inline void cal_process_buffer_complete(struct cal_ctx *ctx)
> +{
> +	v4l2_get_timestamp(&ctx->cur_frm->vb.timestamp);
> +	ctx->cur_frm->vb.field = ctx->m_fmt.field;
> +	ctx->cur_frm->vb.sequence = ctx->sequence++;
> +
> +	vb2_buffer_done(&ctx->cur_frm->vb.vb2_buf, VB2_BUF_STATE_DONE);
> +	ctx->cur_frm = ctx->next_frm;
> +}
> +
> +#define isvcirqset(irq, vc, ff) (irq & \
> +	(CAL_CSI2_VC_IRQENABLE_ ##ff ##_IRQ_##vc ##_MASK << \
> +	 CAL_CSI2_VC_IRQENABLE_ ##ff ##_IRQ_##vc ##_SHIFT))
> +
> +#define isportirqset(irq, port) (irq & \
> +	(CAL_HL_IRQ_MASK(port) << CAL_HL_IRQ_SHIFT(port)))
> +
> +static irqreturn_t cal_irq(int irq_cal, void *data)
> +{
> +	struct cal_dev *dev = (struct cal_dev *)data;
> +	struct cal_ctx *ctx;
> +	struct cal_dmaqueue *dma_q;
> +	u32 irqst2, irqst3;
> +
> +	/* Check which DMA just finished */
> +	irqst2 = cal_read(dev, CAL_HL_IRQSTATUS(2));
> +	if (irqst2) {
> +		/* Clear Interrupt status */
> +		cal_write(dev, CAL_HL_IRQSTATUS(2), irqst2);
> +
> +		/* Need to check both port */
> +		if (isportirqset(irqst2, 1)) {
> +			ctx = dev->ctx[0];
> +
> +			if (ctx->cur_frm != ctx->next_frm)
> +				cal_process_buffer_complete(ctx);
> +		}
> +
> +		if (isportirqset(irqst2, 2)) {
> +			ctx = dev->ctx[1];
> +
> +			if (ctx->cur_frm != ctx->next_frm)
> +				cal_process_buffer_complete(ctx);
> +		}
> +	}
> +
> +	/* Check which DMA just started */
> +	irqst3 = cal_read(dev, CAL_HL_IRQSTATUS(3));
> +	if (irqst3) {
> +		/* Clear Interrupt status */
> +		cal_write(dev, CAL_HL_IRQSTATUS(3), irqst3);
> +
> +		/* Need to check both port */
> +		if (isportirqset(irqst3, 1)) {
> +			ctx = dev->ctx[0];
> +			dma_q = &ctx->vidq;
> +
> +			spin_lock(&ctx->slock);
> +			if (!list_empty(&dma_q->active) &&
> +			    ctx->cur_frm == ctx->next_frm)
> +				cal_schedule_next_buffer(ctx);
> +			spin_unlock(&ctx->slock);
> +		}
> +
> +		if (isportirqset(irqst3, 2)) {
> +			ctx = dev->ctx[1];
> +			dma_q = &ctx->vidq;
> +
> +			spin_lock(&ctx->slock);
> +			if (!list_empty(&dma_q->active) &&
> +			    ctx->cur_frm == ctx->next_frm)
> +				cal_schedule_next_buffer(ctx);
> +			spin_unlock(&ctx->slock);
> +		}
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
> +/*
> + * video ioctls
> + */
> +static int cal_querycap(struct file *file, void *priv,
> +			struct v4l2_capability *cap)
> +{
> +	struct cal_ctx *ctx = video_drvdata(file);
> +
> +	strcpy(cap->driver, CAL_MODULE_NAME);
> +	strcpy(cap->card, CAL_MODULE_NAME);
> +	snprintf(cap->bus_info, sizeof(cap->bus_info),
> +		 "platform:%s", ctx->v4l2_dev.name);
> +	cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
> +			    V4L2_CAP_READWRITE;
> +	cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
> +	return 0;
> +}
> +
> +static int cal_enum_fmt_vid_cap(struct file *file, void  *priv,
> +				struct v4l2_fmtdesc *f)
> +{
> +	struct cal_ctx *ctx = video_drvdata(file);
> +	const struct cal_fmt *fmt = NULL;
> +
> +	if (f->index >= ctx->num_active_fmt)
> +		return -EINVAL;
> +
> +	fmt = ctx->active_fmt[f->index];
> +
> +	f->pixelformat = fmt->fourcc;
> +	f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> +	return 0;
> +}
> +
> +static int __subdev_get_format(struct cal_ctx *ctx,
> +			       struct v4l2_mbus_framefmt *fmt)
> +{
> +	struct v4l2_subdev_format sd_fmt;
> +	struct v4l2_mbus_framefmt *mbus_fmt = &sd_fmt.format;
> +	int ret;
> +
> +	ctx_dbg(2, ctx, "%s\n", __func__);
> +
> +	if (!ctx->sensor)
> +		return -EINVAL;
> +
> +	sd_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> +	sd_fmt.pad = 0;
> +
> +	ret = v4l2_subdev_call(ctx->sensor, pad, get_fmt, NULL, &sd_fmt);
> +	if (ret)
> +		return ret;
> +
> +	*fmt = *mbus_fmt;
> +
> +	ctx_dbg(1, ctx, "%s %dx%d code:%04X\n", __func__,
> +		fmt->width, fmt->height, fmt->code);
> +
> +	return 0;
> +}
> +
> +static int __subdev_set_format(struct cal_ctx *ctx,
> +			       struct v4l2_mbus_framefmt *fmt)
> +{
> +	struct v4l2_subdev_format sd_fmt;
> +	struct v4l2_mbus_framefmt *mbus_fmt = &sd_fmt.format;
> +	int ret;
> +
> +	ctx_dbg(2, ctx, "%s\n", __func__);
> +
> +	if (!ctx->sensor)
> +		return -EINVAL;
> +
> +	sd_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> +	sd_fmt.pad = 0;
> +	*mbus_fmt = *fmt;
> +
> +	ret = v4l2_subdev_call(ctx->sensor, pad, set_fmt, NULL, &sd_fmt);
> +	if (ret)
> +		return ret;
> +
> +	ctx_dbg(1, ctx, "%s %dx%d code:%04X\n", __func__,
> +		fmt->width, fmt->height, fmt->code);
> +
> +	return 0;
> +}
> +
> +static int cal_calc_format_size(struct cal_ctx *ctx,
> +				const struct cal_fmt *fmt,
> +				struct v4l2_format *f)
> +{
> +	ctx_dbg(2, ctx, "%s\n", __func__);
> +
> +	if (!fmt) {
> +		ctx_dbg(3, ctx, "No cal_fmt provided!\n");
> +		return -EINVAL;
> +	}
> +
> +	v4l_bound_align_image(&f->fmt.pix.width, 48, MAX_WIDTH, 2,
> +			      &f->fmt.pix.height, 32, MAX_HEIGHT, 0, 0);
> +	f->fmt.pix.bytesperline = bytes_per_line(f->fmt.pix.width,
> +						 fmt->depth >> 3);
> +	f->fmt.pix.sizeimage = f->fmt.pix.height *
> +			       f->fmt.pix.bytesperline;
> +
> +	ctx_dbg(3, ctx, "%s: fourcc: %s size: %dx%d bpl:%d img_size:%d\n",
> +		__func__, fourcc_to_str(f->fmt.pix.pixelformat),
> +		f->fmt.pix.width, f->fmt.pix.height,
> +		f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
> +
> +	return 0;
> +}
> +
> +static int cal_g_fmt_vid_cap(struct file *file, void *priv,
> +			     struct v4l2_format *f)
> +{
> +	struct cal_ctx *ctx = video_drvdata(file);
> +
> +	ctx_dbg(2, ctx, "%s\n", __func__);
> +
> +	*f = ctx->v_fmt;
> +
> +	return 0;
> +}
> +
> +static int cal_try_fmt_vid_cap(struct file *file, void *priv,
> +			       struct v4l2_format *f)
> +{
> +	struct cal_ctx *ctx = video_drvdata(file);
> +	const struct cal_fmt *fmt;
> +	struct v4l2_subdev_frame_size_enum fse;
> +	int ret, found;
> +
> +	ctx_dbg(2, ctx, "%s\n", __func__);
> +
> +	fmt = find_format_by_pix(ctx, f->fmt.pix.pixelformat);
> +	if (!fmt) {
> +		ctx_dbg(3, ctx, "Fourcc format (0x%08x) not found.\n",
> +			f->fmt.pix.pixelformat);
> +
> +		/* Just get the first one enumerated */
> +		fmt = ctx->active_fmt[0];
> +		f->fmt.pix.pixelformat = fmt->fourcc;
> +	}
> +
> +	f->fmt.pix.field = ctx->v_fmt.fmt.pix.field;
> +
> +	/* check for/find a valid width/height */
> +	ret = 0;
> +	found = false;
> +	fse.pad = 0;
> +	fse.code = fmt->code;
> +	fse.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> +	for (fse.index = 0; ; fse.index++) {
> +		ret = v4l2_subdev_call(ctx->sensor, pad, enum_frame_size,
> +				       NULL, &fse);
> +		if (ret)
> +			break;
> +
> +		if ((f->fmt.pix.width == fse.max_width) &&
> +		    (f->fmt.pix.height == fse.max_height)) {
> +			found = true;
> +			break;
> +		} else if ((f->fmt.pix.width >= fse.min_width) &&
> +			 (f->fmt.pix.width <= fse.max_width) &&
> +			 (f->fmt.pix.height >= fse.min_height) &&
> +			 (f->fmt.pix.height <= fse.max_height)) {
> +			found = true;
> +			break;
> +		}
> +	}
> +
> +	if (!found) {
> +		/* use existing values as default */
> +		f->fmt.pix.width = ctx->v_fmt.fmt.pix.width;
> +		f->fmt.pix.height =  ctx->v_fmt.fmt.pix.height;
> +	}
> +
> +	/*
> +	 * Use current colorspace for now, it will get
> +	 * updated properly during s_fmt
> +	 */
> +	f->fmt.pix.colorspace = ctx->v_fmt.fmt.pix.colorspace;
> +	return cal_calc_format_size(ctx, fmt, f);
> +}
> +
> +static int cal_s_fmt_vid_cap(struct file *file, void *priv,
> +			     struct v4l2_format *f)
> +{
> +	struct cal_ctx *ctx = video_drvdata(file);
> +	struct vb2_queue *q = &ctx->vb_vidq;
> +	const struct cal_fmt *fmt;
> +	struct v4l2_mbus_framefmt mbus_fmt;
> +	int ret;
> +
> +	ctx_dbg(2, ctx, "%s\n", __func__);
> +
> +	if (vb2_is_busy(q)) {
> +		ctx_dbg(3, ctx, "%s device busy\n", __func__);
> +		return -EBUSY;
> +	}
> +
> +	ret = cal_try_fmt_vid_cap(file, priv, f);
> +	if (ret < 0)
> +		return ret;
> +
> +	fmt = find_format_by_pix(ctx, f->fmt.pix.pixelformat);
> +
> +	v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, fmt->code);
> +
> +	ret = __subdev_set_format(ctx, &mbus_fmt);
> +	if (ret)
> +		return ret;
> +
> +	/* Just double check nothing has gone wrong */
> +	if (mbus_fmt.code != fmt->code) {
> +		ctx_dbg(3, ctx,
> +			"%s subdev changed format on us, this should not happen\n",
> +			__func__);
> +		return -EINVAL;
> +	}
> +
> +	v4l2_fill_pix_format(&ctx->v_fmt.fmt.pix, &mbus_fmt);
> +	ctx->v_fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> +	ctx->v_fmt.fmt.pix.pixelformat  = fmt->fourcc;
> +	cal_calc_format_size(ctx, fmt, &ctx->v_fmt);
> +	ctx->fmt = fmt;
> +	ctx->m_fmt = mbus_fmt;
> +	*f = ctx->v_fmt;
> +
> +	return 0;
> +}
> +
> +static int cal_enum_framesizes(struct file *file, void *fh,
> +			       struct v4l2_frmsizeenum *fsize)
> +{
> +	struct cal_ctx *ctx = video_drvdata(file);
> +	const struct cal_fmt *fmt;
> +	struct v4l2_subdev_frame_size_enum fse;
> +	int ret;
> +
> +	ctx_dbg(2, ctx, "%s\n", __func__);

This s a general note: do you really need tracing-like debug macros
all around the code?

You could easily check if the functions are called via trace.

> +
> +	/* check for valid format */
> +	fmt = find_format_by_pix(ctx, fsize->pixel_format);
> +	if (!fmt) {
> +		ctx_dbg(3, ctx, "Invalid pixel code: %x\n",
> +			fsize->pixel_format);
> +		return -EINVAL;
> +	}
> +
> +	fse.index = fsize->index;
> +	fse.pad = 0;
> +	fse.code = fmt->code;
> +
> +	ret = v4l2_subdev_call(ctx->sensor, pad, enum_frame_size, NULL, &fse);
> +	if (ret)
> +		return -EINVAL;
> +
> +	ctx_dbg(1, ctx, "%s: index: %d code: %x W:[%d,%d] H:[%d,%d]\n",
> +		__func__, fse.index, fse.code, fse.min_width, fse.max_width,
> +		fse.min_height, fse.max_height);
> +
> +	fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
> +	fsize->discrete.width = fse.max_width;
> +	fsize->discrete.height = fse.max_height;
> +
> +	return 0;
> +}
> +
> +static int cal_enum_input(struct file *file, void *priv,
> +			  struct v4l2_input *inp)
> +{
> +	if (inp->index >= CAL_NUM_INPUT)
> +		return -EINVAL;
> +
> +	inp->type = V4L2_INPUT_TYPE_CAMERA;
> +	sprintf(inp->name, "Camera %u", inp->index);
> +	return 0;
> +}
> +
> +static int cal_g_input(struct file *file, void *priv, unsigned int *i)
> +{
> +	struct cal_ctx *ctx = video_drvdata(file);
> +
> +	*i = ctx->input;
> +	return 0;
> +}
> +
> +static int cal_s_input(struct file *file, void *priv, unsigned int i)
> +{
> +	struct cal_ctx *ctx = video_drvdata(file);
> +
> +	if (i >= CAL_NUM_INPUT)
> +		return -EINVAL;
> +
> +	ctx->input = i;
> +	return 0;
> +}
> +
> +/* timeperframe is arbitrary and continuous */
> +static int cal_enum_frameintervals(struct file *file, void *priv,
> +				   struct v4l2_frmivalenum *fival)
> +{
> +	struct cal_ctx *ctx = video_drvdata(file);
> +	const struct cal_fmt *fmt;
> +	struct v4l2_subdev_frame_size_enum fse;
> +	int ret;
> +
> +	if (fival->index)
> +		return -EINVAL;
> +
> +	fmt = find_format_by_pix(ctx, fival->pixel_format);
> +	if (!fmt)
> +		return -EINVAL;
> +
> +	/* check for valid width/height */
> +	ret = 0;
> +	fse.pad = 0;
> +	fse.code = fmt->code;
> +	fse.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> +	for (fse.index = 0; ; fse.index++) {
> +		ret = v4l2_subdev_call(ctx->sensor, pad, enum_frame_size,
> +				       NULL, &fse);
> +		if (ret)
> +			return -EINVAL;
> +
> +		if ((fival->width == fse.max_width) &&
> +		    (fival->height == fse.max_height))
> +			break;
> +		else if ((fival->width >= fse.min_width) &&
> +			 (fival->width <= fse.max_width) &&
> +			 (fival->height >= fse.min_height) &&
> +			 (fival->height <= fse.max_height))
> +			break;
> +
> +		return -EINVAL;
> +	}
> +
> +	fival->type = V4L2_FRMIVAL_TYPE_DISCRETE;
> +	fival->discrete.numerator = 1;
> +	fival->discrete.denominator = 30;
> +
> +	return 0;
> +}
> +
> +/*
> + * Videobuf operations
> + */
> +static int cal_queue_setup(struct vb2_queue *vq, const void *parg,
> +			   unsigned int *nbuffers, unsigned int *nplanes,
> +			   unsigned int sizes[], void *alloc_ctxs[])
> +{
> +	const struct v4l2_format *fmt = parg;
> +	struct cal_ctx *ctx = vb2_get_drv_priv(vq);
> +
> +	if (fmt && fmt->fmt.pix.sizeimage < ctx->v_fmt.fmt.pix.sizeimage)
> +		return -EINVAL;
> +
> +	if (vq->num_buffers + *nbuffers < 3)
> +		*nbuffers = 3 - vq->num_buffers;
> +
> +	*nplanes = 1;
> +	sizes[0] = fmt ? fmt->fmt.pix.sizeimage : ctx->v_fmt.fmt.pix.sizeimage;
> +	alloc_ctxs[0] = ctx->alloc_ctx;
> +
> +	ctx_dbg(3, ctx, "nbuffers=%d, size=%d\n", *nbuffers, sizes[0]);
> +
> +	return 0;
> +}
> +
> +static int cal_buffer_prepare(struct vb2_buffer *vb)
> +{
> +	struct cal_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
> +	struct cal_buffer *buf = container_of(vb, struct cal_buffer,
> +					      vb.vb2_buf);
> +	unsigned long size;
> +
> +	if (WARN_ON(!ctx->fmt))
> +		return -EINVAL;
> +
> +	size = ctx->v_fmt.fmt.pix.sizeimage;
> +	if (vb2_plane_size(vb, 0) < size) {
> +		ctx_err(ctx,
> +			"data will not fit into plane (%lu < %lu)\n",
> +			vb2_plane_size(vb, 0), size);
> +		return -EINVAL;
> +	}
> +
> +	vb2_set_plane_payload(&buf->vb.vb2_buf, 0, size);
> +	return 0;
> +}
> +
> +static void cal_buffer_queue(struct vb2_buffer *vb)
> +{
> +	struct cal_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
> +	struct cal_buffer *buf = container_of(vb, struct cal_buffer,
> +					      vb.vb2_buf);
> +	struct cal_dmaqueue *vidq = &ctx->vidq;
> +	unsigned long flags = 0;
> +
> +	/* recheck locking */
> +	spin_lock_irqsave(&ctx->slock, flags);
> +	list_add_tail(&buf->list, &vidq->active);
> +	spin_unlock_irqrestore(&ctx->slock, flags);
> +}
> +
> +static int cal_start_streaming(struct vb2_queue *vq, unsigned int count)
> +{
> +	struct cal_ctx *ctx = vb2_get_drv_priv(vq);
> +	struct cal_dmaqueue *dma_q = &ctx->vidq;
> +	struct cal_buffer *buf, *tmp;
> +	unsigned long addr = 0;
> +	unsigned long flags;
> +	int ret;
> +
> +	ctx_dbg(3, ctx, "%s\n", __func__);
> +
> +	spin_lock_irqsave(&ctx->slock, flags);
> +	if (list_empty(&dma_q->active)) {
> +		spin_unlock_irqrestore(&ctx->slock, flags);
> +		ctx_dbg(3, ctx, "buffer queue is empty\n");
> +		return -EIO;
> +	}
> +
> +	buf = list_entry(dma_q->active.next, struct cal_buffer, list);
> +	ctx->cur_frm = buf;
> +	ctx->next_frm = buf;
> +	list_del(&buf->list);
> +	spin_unlock_irqrestore(&ctx->slock, flags);
> +
> +	addr = vb2_dma_contig_plane_dma_addr(&ctx->cur_frm->vb.vb2_buf, 0);
> +	ctx->sequence = 0;
> +
> +	ctx_dbg(3, ctx, "enable_irqs\n");
> +
> +	ret = cal_get_external_info(ctx);
> +	if (ret < 0)
> +		goto err;
> +
> +	enable_irqs(ctx);
> +	camerarx_phy_enable(ctx);
> +	csi2_init(ctx);
> +	csi2_phy_config(ctx);
> +	csi2_lane_config(ctx);
> +	csi2_ctx_config(ctx);
> +	pix_proc_config(ctx);
> +	cal_wr_dma_config(ctx, ctx->v_fmt.fmt.pix.bytesperline);
> +	cal_wr_dma_addr(ctx, addr);
> +	csi2_ppi_enable(ctx);
> +
> +	if (ctx->sensor) {
> +		if (v4l2_subdev_call(ctx->sensor, video, s_stream, 1)) {
> +			ctx_err(ctx, "stream on failed in subdev\n");
> +			ret = -EINVAL;
> +			goto err;
> +		}
> +	}
> +
> +	if (debug >= 4)
> +		cal_quickdump_regs(ctx->dev);
> +
> +	ctx_dbg(3, ctx, "returning from %s\n", __func__);
> +	return 0;
> +
> +err:
> +	list_for_each_entry_safe(buf, tmp, &dma_q->active, list) {
> +		list_del(&buf->list);
> +		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED);
> +	}
> +	return ret;
> +}
> +
> +static void cal_stop_streaming(struct vb2_queue *vq)
> +{
> +	struct cal_ctx *ctx = vb2_get_drv_priv(vq);
> +	struct cal_dmaqueue *dma_q = &ctx->vidq;
> +	struct cal_buffer *buf, *tmp;
> +	unsigned long flags;
> +
> +	ctx_dbg(3, ctx, "%s\n", __func__);
> +
> +	if (ctx->sensor) {
> +		if (v4l2_subdev_call(ctx->sensor, video, s_stream, 0))
> +			ctx_err(ctx, "stream off failed in subdev\n");
> +	}
> +
> +	ctx_dbg(3, ctx, "csi2_ppi_disable\n");
> +	csi2_ppi_disable(ctx);
> +
> +	ctx_dbg(3, ctx, "disable_irqs\n");
> +	disable_irqs(ctx);

The two above prints seem to be to detect some special error while
you wrote the driver, and probably aren't need anymore. The same
applies to the function tracing prints.

> +
> +	/* Release all active buffers */
> +	spin_lock_irqsave(&ctx->slock, flags);
> +	list_for_each_entry_safe(buf, tmp, &dma_q->active, list) {
> +		list_del(&buf->list);
> +		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
> +	}
> +
> +	if (ctx->cur_frm == ctx->next_frm) {
> +		vb2_buffer_done(&ctx->cur_frm->vb.vb2_buf, VB2_BUF_STATE_ERROR);
> +	} else {
> +		vb2_buffer_done(&ctx->cur_frm->vb.vb2_buf, VB2_BUF_STATE_ERROR);
> +		vb2_buffer_done(&ctx->next_frm->vb.vb2_buf,
> +				VB2_BUF_STATE_ERROR);
> +	}
> +	ctx->cur_frm = NULL;
> +	ctx->next_frm = NULL;
> +	spin_unlock_irqrestore(&ctx->slock, flags);
> +
> +	ctx_dbg(3, ctx, "returning from %s\n", __func__);
> +}
> +
> +static struct vb2_ops cal_video_qops = {
> +	.queue_setup		= cal_queue_setup,
> +	.buf_prepare		= cal_buffer_prepare,
> +	.buf_queue		= cal_buffer_queue,
> +	.start_streaming	= cal_start_streaming,
> +	.stop_streaming		= cal_stop_streaming,
> +	.wait_prepare		= vb2_ops_wait_prepare,
> +	.wait_finish		= vb2_ops_wait_finish,
> +};
> +
> +static const struct v4l2_file_operations cal_fops = {
> +	.owner		= THIS_MODULE,
> +	.open           = v4l2_fh_open,
> +	.release        = vb2_fop_release,
> +	.read           = vb2_fop_read,
> +	.poll		= vb2_fop_poll,
> +	.unlocked_ioctl = video_ioctl2, /* V4L2 ioctl handler */
> +	.mmap           = vb2_fop_mmap,
> +};
> +
> +static const struct v4l2_ioctl_ops cal_ioctl_ops = {
> +	.vidioc_querycap      = cal_querycap,
> +	.vidioc_enum_fmt_vid_cap  = cal_enum_fmt_vid_cap,
> +	.vidioc_g_fmt_vid_cap     = cal_g_fmt_vid_cap,
> +	.vidioc_try_fmt_vid_cap   = cal_try_fmt_vid_cap,
> +	.vidioc_s_fmt_vid_cap     = cal_s_fmt_vid_cap,
> +	.vidioc_enum_framesizes   = cal_enum_framesizes,
> +	.vidioc_reqbufs       = vb2_ioctl_reqbufs,
> +	.vidioc_create_bufs   = vb2_ioctl_create_bufs,
> +	.vidioc_prepare_buf   = vb2_ioctl_prepare_buf,
> +	.vidioc_querybuf      = vb2_ioctl_querybuf,
> +	.vidioc_qbuf          = vb2_ioctl_qbuf,
> +	.vidioc_dqbuf         = vb2_ioctl_dqbuf,
> +	.vidioc_enum_input    = cal_enum_input,
> +	.vidioc_g_input       = cal_g_input,
> +	.vidioc_s_input       = cal_s_input,
> +	.vidioc_enum_frameintervals = cal_enum_frameintervals,
> +	.vidioc_streamon      = vb2_ioctl_streamon,
> +	.vidioc_streamoff     = vb2_ioctl_streamoff,
> +	.vidioc_log_status    = v4l2_ctrl_log_status,
> +	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
> +	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
> +};
> +
> +static struct video_device cal_videodev = {
> +	.name		= CAL_MODULE_NAME,
> +	.fops		= &cal_fops,
> +	.ioctl_ops	= &cal_ioctl_ops,
> +	.minor		= -1,
> +	.release	= video_device_release_empty,
> +};
> +
> +/* -----------------------------------------------------------------
> + *	Initialization and module stuff
> + * ------------------------------------------------------------------
> + */
> +static int cal_complete_ctx(struct cal_ctx *ctx);
> +
> +static int cal_async_bound(struct v4l2_async_notifier *notifier,
> +			   struct v4l2_subdev *subdev,
> +			   struct v4l2_async_subdev *asd)
> +{
> +	struct cal_ctx *ctx = notifier_to_ctx(notifier);
> +	struct v4l2_subdev_mbus_code_enum mbus_code;
> +	int ret = 0;
> +	int i, j, k;
> +
> +	ctx_dbg(3, ctx, "%s\n", __func__);
> +
> +	if (ctx->sensor) {
> +		ctx_info(ctx, "Rejecting subdev %s (Already set!!)",
> +			 subdev->name);
> +		return 0;
> +	}
> +
> +	ctx->sensor = subdev;
> +	ctx_info(ctx, "Using sensor %s for capture\n",
> +		 subdev->name);
> +
> +	/* Enumerate sub device formats and enable all matching local formats */
> +	ctx->num_active_fmt = 0;
> +	for (j = 0, i = 0; ret != -EINVAL; ++j) {
> +		struct cal_fmt *fmt;
> +
> +		memset(&mbus_code, 0, sizeof(mbus_code));
> +		mbus_code.index = j;
> +		ret = v4l2_subdev_call(subdev, pad, enum_mbus_code,
> +				       NULL, &mbus_code);
> +		if (ret)
> +			continue;
> +
> +		ctx_dbg(2, ctx,
> +			"subdev %s: code: %04x idx: %d\n",
> +			subdev->name, mbus_code.code, j);
> +
> +		for (k = 0; k < ARRAY_SIZE(cal_formats); k++) {
> +			fmt = &cal_formats[k];
> +
> +			if (mbus_code.code == fmt->code) {
> +				ctx->active_fmt[i] = fmt;
> +				ctx_dbg(2, ctx,
> +					"matched fourcc: %s: code: %04x idx: %d\n",
> +					fourcc_to_str(fmt->fourcc),
> +					fmt->code, i);
> +				ctx->num_active_fmt = ++i;
> +			}
> +		}
> +	}
> +
> +	if (i == 0) {
> +		ctx_err(ctx, "No suitable format reported by subdev %s\n",
> +			subdev->name);
> +		return -EINVAL;
> +	}
> +
> +	cal_complete_ctx(ctx);
> +
> +	return 0;
> +}
> +
> +static int cal_async_complete(struct v4l2_async_notifier *notifier)
> +{
> +	struct cal_ctx *ctx = notifier_to_ctx(notifier);
> +	const struct cal_fmt *fmt;
> +	struct v4l2_mbus_framefmt mbus_fmt;
> +	int ret;
> +
> +	ctx_dbg(3, ctx, "%s\n", __func__);
> +
> +	ret = __subdev_get_format(ctx, &mbus_fmt);
> +	if (ret)
> +		return ret;
> +
> +	fmt = find_format_by_code(ctx, mbus_fmt.code);
> +	if (!fmt) {
> +		ctx_dbg(3, ctx, "mbus code format (0x%08x) not found.\n",
> +			mbus_fmt.code);
> +		return -EINVAL;
> +	}
> +
> +	/* Save current subdev format */
> +	v4l2_fill_pix_format(&ctx->v_fmt.fmt.pix, &mbus_fmt);
> +	ctx->v_fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> +	ctx->v_fmt.fmt.pix.pixelformat  = fmt->fourcc;
> +	cal_calc_format_size(ctx, fmt, &ctx->v_fmt);
> +	ctx->fmt = fmt;
> +	ctx->m_fmt = mbus_fmt;
> +
> +	return 0;
> +}
> +
> +static int cal_complete_ctx(struct cal_ctx *ctx)
> +{
> +	struct video_device *vfd;
> +	struct vb2_queue *q;
> +	int ret;
> +
> +	ctx->timeperframe = tpf_default;
> +	ctx->external_rate = 192000000;
> +
> +	/* initialize locks */
> +	spin_lock_init(&ctx->slock);
> +	mutex_init(&ctx->mutex);
> +
> +	/* initialize queue */
> +	q = &ctx->vb_vidq;
> +	q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> +	q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ;
> +	q->drv_priv = ctx;
> +	q->buf_struct_size = sizeof(struct cal_buffer);
> +	q->ops = &cal_video_qops;
> +	q->mem_ops = &vb2_dma_contig_memops;
> +	q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
> +	q->lock = &ctx->mutex;
> +	q->min_buffers_needed = 3;
> +
> +	ret = vb2_queue_init(q);
> +	if (ret)
> +		return ret;
> +
> +	/* init video dma queues */
> +	INIT_LIST_HEAD(&ctx->vidq.active);
> +
> +	vfd = &ctx->vdev;
> +	*vfd = cal_videodev;
> +	vfd->v4l2_dev = &ctx->v4l2_dev;
> +	vfd->queue = q;
> +
> +	/*
> +	 * Provide a mutex to v4l2 core. It will be used to protect
> +	 * all fops and v4l2 ioctls.
> +	 */
> +	vfd->lock = &ctx->mutex;
> +	video_set_drvdata(vfd, ctx);
> +
> +	ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr);
> +	if (ret < 0)
> +		return ret;
> +
> +	v4l2_info(&ctx->v4l2_dev, "V4L2 device registered as %s\n",
> +		  video_device_node_name(vfd));
> +
> +	ctx->alloc_ctx = vb2_dma_contig_init_ctx(vfd->v4l2_dev->dev);
> +	if (IS_ERR(ctx->alloc_ctx)) {
> +		ctx_err(ctx, "Failed to alloc vb2 context\n");
> +		ret = PTR_ERR(ctx->alloc_ctx);
> +		goto vdev_unreg;
> +	}
> +
> +	return 0;
> +
> +vdev_unreg:
> +	video_unregister_device(vfd);
> +	return ret;
> +}
> +
> +static struct device_node *
> +of_get_next_port(const struct device_node *parent,
> +		 struct device_node *prev)
> +{
> +	struct device_node *port = NULL;
> +
> +	if (!parent)
> +		return NULL;
> +
> +	if (!prev) {
> +		struct device_node *ports;
> +		/*
> +		 * It's the first call, we have to find a port subnode
> +		 * within this node or within an optional 'ports' node.
> +		 */
> +		ports = of_get_child_by_name(parent, "ports");
> +		if (ports)
> +			parent = ports;
> +
> +		port = of_get_child_by_name(parent, "port");
> +
> +		/* release the 'ports' node */
> +		of_node_put(ports);
> +	} else {
> +		struct device_node *ports;
> +
> +		ports = of_get_parent(prev);
> +		if (!ports)
> +			return NULL;
> +
> +		do {
> +			port = of_get_next_child(ports, prev);
> +			if (!port) {
> +				of_node_put(ports);
> +				return NULL;
> +			}
> +			prev = port;
> +		} while (of_node_cmp(port->name, "port") != 0);
> +	}
> +
> +	return port;
> +}
> +
> +static struct device_node *
> +of_get_next_endpoint(const struct device_node *parent,
> +		     struct device_node *prev)
> +{
> +	struct device_node *ep = NULL;
> +
> +	if (!parent)
> +		return NULL;
> +
> +	do {
> +		ep = of_get_next_child(parent, prev);
> +		if (!ep)
> +			return NULL;
> +		prev = ep;
> +	} while (of_node_cmp(ep->name, "endpoint") != 0);
> +
> +	return ep;
> +}
> +
> +static int of_cal_create_instance(struct cal_ctx *ctx, int inst)
> +{
> +	struct platform_device *pdev = ctx->dev->pdev;
> +	struct device_node *ep_node, *port, *remote_ep,
> +			*sensor_node, *parent;
> +	struct v4l2_of_endpoint *endpoint;
> +	struct v4l2_async_subdev *asd;
> +	u32 regval = 0;
> +	int ret, index, found_port = 0, lane;
> +
> +	parent = pdev->dev.of_node;
> +
> +	asd = &ctx->asd;
> +	endpoint = &ctx->endpoint;
> +
> +	ep_node = NULL;
> +	port = NULL;
> +	remote_ep = NULL;
> +	sensor_node = NULL;
> +	ret = -EINVAL;
> +
> +	ctx_dbg(3, ctx, "Scanning Port node for csi2 port: %d\n", inst);
> +	for (index = 0; index < CAL_NUM_CSI2_PORTS; index++) {
> +		port = of_get_next_port(parent, port);
> +		if (!port) {
> +			ctx_dbg(1, ctx, "No port node found for csi2 port:%d\n",
> +				index);
> +			goto cleanup_exit;
> +		}
> +
> +		/* Match the slice number with <REG> */
> +		of_property_read_u32(port, "reg", &regval);
> +		ctx_dbg(3, ctx, "port:%d inst:%d <reg>:%d\n",
> +			index, inst, regval);
> +		if ((regval == inst) && (index == inst)) {
> +			found_port = 1;
> +			break;
> +		}
> +	}
> +
> +	if (!found_port) {
> +		ctx_dbg(1, ctx, "No port node matches csi2 port:%d\n",
> +			inst);
> +		goto cleanup_exit;
> +	}
> +
> +	ctx_dbg(3, ctx, "Scanning sub-device for csi2 port: %d\n",
> +		inst);
> +
> +	ep_node = of_get_next_endpoint(port, ep_node);
> +	if (!ep_node) {
> +		ctx_dbg(3, ctx, "can't get next endpoint\n");
> +		goto cleanup_exit;
> +	}
> +
> +	sensor_node = of_graph_get_remote_port_parent(ep_node);
> +	if (!sensor_node) {
> +		ctx_dbg(3, ctx, "can't get remote parent\n");
> +		goto cleanup_exit;
> +	}
> +	asd->match_type = V4L2_ASYNC_MATCH_OF;
> +	asd->match.of.node = sensor_node;
> +
> +	remote_ep = of_parse_phandle(ep_node, "remote-endpoint", 0);
> +	if (!remote_ep) {
> +		ctx_dbg(3, ctx, "can't get remote-endpoint\n");
> +		goto cleanup_exit;
> +	}
> +	v4l2_of_parse_endpoint(remote_ep, endpoint);
> +
> +	if (endpoint->bus_type != V4L2_MBUS_CSI2) {
> +		ctx_err(ctx, "Port:%d sub-device %s is not a CSI2 device\n",
> +			inst, sensor_node->name);
> +		goto cleanup_exit;
> +	}
> +
> +	/* Store Virtual Channel number */
> +	ctx->virtual_channel = endpoint->base.id;
> +
> +	ctx_dbg(3, ctx, "Port:%d v4l2-endpoint: CSI2\n", inst);
> +	ctx_dbg(3, ctx, "Virtual Channel=%d\n", ctx->virtual_channel);
> +	ctx_dbg(3, ctx, "flags=0x%08x\n", endpoint->bus.mipi_csi2.flags);
> +	ctx_dbg(3, ctx, "clock_lane=%d\n", endpoint->bus.mipi_csi2.clock_lane);
> +	ctx_dbg(3, ctx, "num_data_lanes=%d\n",
> +		endpoint->bus.mipi_csi2.num_data_lanes);
> +	ctx_dbg(3, ctx, "data_lanes= <\n");
> +	for (lane = 0; lane < endpoint->bus.mipi_csi2.num_data_lanes; lane++)
> +		ctx_dbg(3, ctx, "\t%d\n",
> +			endpoint->bus.mipi_csi2.data_lanes[lane]);
> +	ctx_dbg(3, ctx, "\t>\n");
> +
> +	ctx_dbg(1, ctx, "Port: %d found sub-device %s\n",
> +		inst, sensor_node->name);
> +
> +	ctx_dbg(1, ctx, "Asynchronous subdevice registration\n");
> +	ctx->asd_list[0] = asd;
> +	ctx->notifier.subdevs = ctx->asd_list;
> +	ctx->notifier.num_subdevs = 1;
> +	ctx->notifier.bound = cal_async_bound;
> +	ctx->notifier.complete = cal_async_complete;
> +	ret = v4l2_async_notifier_register(&ctx->v4l2_dev,
> +					   &ctx->notifier);
> +	if (ret) {
> +		ctx_err(ctx, "Error registering async notifier\n");
> +		ret = -EINVAL;
> +	}
> +
> +cleanup_exit:
> +	if (!remote_ep)
> +		of_node_put(remote_ep);
> +	if (!sensor_node)
> +		of_node_put(sensor_node);
> +	if (!ep_node)
> +		of_node_put(ep_node);
> +	if (!port)
> +		of_node_put(port);
> +
> +	return ret;
> +}
> +
> +static struct cal_ctx *cal_create_instance(struct cal_dev *dev, int inst)
> +{
> +	struct cal_ctx *ctx;
> +	struct v4l2_ctrl_handler *hdl;
> +	int ret;
> +
> +	ctx = devm_kzalloc(&dev->pdev->dev, sizeof(*ctx), GFP_KERNEL);
> +	if (!ctx)
> +		return 0;
> +
> +	/* save the cal_dev * for future ref */
> +	ctx->dev = dev;
> +
> +	snprintf(ctx->v4l2_dev.name, sizeof(ctx->v4l2_dev.name),
> +		 "%s-%03d", CAL_MODULE_NAME, inst);
> +	ret = v4l2_device_register(&dev->pdev->dev, &ctx->v4l2_dev);
> +	if (ret)
> +		goto err_exit;
> +
> +	hdl = &ctx->ctrl_handler;
> +	ret = v4l2_ctrl_handler_init(hdl, 11);
> +	if (ret) {
> +		ctx_err(ctx, "Failed to init ctrl handler\n");
> +		goto unreg_dev;
> +	}
> +	ctx->v4l2_dev.ctrl_handler = hdl;
> +
> +	/* Make sure Camera Core H/W register area is available */
> +	ctx->cc = cc_create(dev, inst);
> +	if (IS_ERR(ctx->cc)) {
> +		ret = PTR_ERR(ctx->cc);
> +		goto free_hdl;
> +	}
> +
> +	/* Store the instance id */
> +	ctx->csi2_port = inst + 1;
> +
> +	ret = of_cal_create_instance(ctx, inst);
> +	if (ret) {
> +		ctx_dbg(1, ctx, "Error scanning cal instance: %d\n", inst);
> +		ret = -EINVAL;
> +		goto free_hdl;
> +	}
> +	return ctx;
> +
> +free_hdl:
> +	v4l2_ctrl_handler_free(hdl);
> +unreg_dev:
> +	v4l2_device_unregister(&ctx->v4l2_dev);
> +err_exit:
> +	return 0;
> +}
> +
> +static int cal_probe(struct platform_device *pdev)
> +{
> +	struct cal_dev *dev;
> +	int ret;
> +	int irq, func;
> +
> +	dev_info(&pdev->dev, "Probing %s\n",
> +		 CAL_MODULE_NAME);

You could put it into just one line.

Yet,  I don't see a reason to inform that the module is being
probed. Instead, it would make sense to inform that the module
was successfully probed, or if it failed for some reason
different than -ENOMEM (as this specific error is already
reported by the core).

> +
> +	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
> +	if (!dev)
> +		return -ENOMEM;
> +
> +	/* set pseudo v4l2 device name so we can use v4l2_printk */
> +	strcpy(dev->v4l2_dev.name, CAL_MODULE_NAME);

Better to use strlcpy().

> +
> +	/* save pdev pointer */
> +	dev->pdev = pdev;
> +
> +	dev->res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> +			"cal_top");
> +	dev->base = devm_ioremap_resource(&pdev->dev, dev->res);
> +	if (IS_ERR(dev->base))
> +		return PTR_ERR(dev->base);
> +
> +	cal_dbg(1, dev, "ioresource %s at %pa - %pa\n",
> +		dev->res->name, &dev->res->start, &dev->res->end);
> +
> +	irq = platform_get_irq(pdev, 0);
> +	cal_dbg(1, dev, "got irq# %d\n", irq);
> +	ret = devm_request_irq(&pdev->dev, irq, cal_irq, 0, CAL_MODULE_NAME,
> +			       dev);
> +	if (ret)
> +		return ret;
> +
> +	platform_set_drvdata(pdev, dev);
> +
> +	pm_runtime_enable(&pdev->dev);
> +
> +	ret = pm_runtime_get_sync(&pdev->dev);
> +	if (ret)
> +		return ret;
> +
> +	/* Just check we can actually access the module */
> +	cal_get_hwinfo(dev);
> +
> +	func = cal_read_field(dev, CAL_HL_REVISION, CAL_HL_REVISION_FUNC_MASK,
> +			      CAL_HL_REVISION_FUNC_SHIFT);
> +	cal_dbg(1, dev, "CAL HL_REVISION function %x\n", func);
> +
> +	dev->cm = cm_create(dev);
> +	if (IS_ERR(dev->cm)) {
> +		ret = PTR_ERR(dev->cm);
> +		goto runtime_put;
> +	}
> +	dev->ctx[0] = NULL;
> +	dev->ctx[1] = NULL;
> +
> +	dev->ctx[0] = cal_create_instance(dev, 0);
> +	dev->ctx[1] = cal_create_instance(dev, 1);
> +	if (!dev->ctx[0] && !dev->ctx[1]) {
> +		ret = -ENODEV;
> +		cal_err(dev, "Neither port is configured, no point in staying up\n");
> +		goto runtime_put;
> +	}
> +
> +	return 0;
> +
> +runtime_put:
> +	pm_runtime_put_sync(&pdev->dev);
> +	pm_runtime_disable(&pdev->dev);
> +	return ret;
> +}
> +
> +static int cal_remove(struct platform_device *pdev)
> +{
> +	struct cal_dev *dev =
> +		(struct cal_dev *)platform_get_drvdata(pdev);
> +	struct cal_ctx *ctx;
> +	int i;
> +
> +	cal_dbg(1, dev, "Removing %s\n", CAL_MODULE_NAME);
> +
> +	for (i = 0; i < CAL_NUM_CONTEXT; i++) {
> +		ctx = dev->ctx[i];
> +		if (ctx) {
> +			ctx_dbg(1, ctx, "unregistering %s\n",
> +				video_device_node_name(&ctx->vdev));
> +			camerarx_phy_disable(ctx);
> +			v4l2_async_notifier_unregister(&ctx->notifier);
> +			vb2_dma_contig_cleanup_ctx(ctx->alloc_ctx);
> +			v4l2_ctrl_handler_free(&ctx->ctrl_handler);
> +			v4l2_device_unregister(&ctx->v4l2_dev);
> +			video_unregister_device(&ctx->vdev);
> +		}
> +	}
> +
> +	pm_runtime_put_sync(&pdev->dev);
> +	pm_runtime_disable(&pdev->dev);
> +
> +	return 0;
> +}
> +
> +#if defined(CONFIG_OF)
> +static const struct of_device_id cal_of_match[] = {
> +	{ .compatible = "ti,dra72-cal", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, cal_of_match);
> +#endif
> +
> +static struct platform_driver cal_pdrv = {
> +	.probe		= cal_probe,
> +	.remove		= cal_remove,
> +	.driver		= {
> +		.name	= CAL_MODULE_NAME,
> +		.of_match_table = of_match_ptr(cal_of_match),
> +	},
> +};
> +
> +module_platform_driver(cal_pdrv);
> diff --git a/drivers/media/platform/ti-vpe/cal_regs.h b/drivers/media/platform/ti-vpe/cal_regs.h
> new file mode 100644
> index 000000000000..096f1c1a53e3
> --- /dev/null
> +++ b/drivers/media/platform/ti-vpe/cal_regs.h
> @@ -0,0 +1,779 @@
> +/*
> + * TI CAL camera interface driver
> + *
> + * Copyright (c) 2015 Texas Instruments Inc.
> + *
> + * Benoit Parrot, <bparrot@...com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + */
> +
> +#ifndef __TI_CAL_REGS_H
> +#define __TI_CAL_REGS_H
> +
> +#define CAL_NUM_CSI2_PORTS		2
> +
> +/* CAL register offsets */
> +
> +#define CAL_HL_REVISION			0x0000
> +#define CAL_HL_HWINFO			0x0004
> +#define CAL_HL_SYSCONFIG		0x0010
> +#define CAL_HL_IRQ_EOI			0x001c
> +#define CAL_HL_IRQSTATUS_RAW(m)		(0x20U + ((m-1) * 0x10U))
> +#define CAL_HL_IRQSTATUS(m)		(0x24U + ((m-1) * 0x10U))
> +#define CAL_HL_IRQENABLE_SET(m)		(0x28U + ((m-1) * 0x10U))
> +#define CAL_HL_IRQENABLE_CLR(m)		(0x2cU + ((m-1) * 0x10U))
> +#define CAL_PIX_PROC(m)			(0xc0U + ((m-1) * 0x4U))
> +#define CAL_CTRL			0x100
> +#define CAL_CTRL1			0x104
> +#define CAL_LINE_NUMBER_EVT		0x108
> +#define CAL_VPORT_CTRL1			0x120
> +#define CAL_VPORT_CTRL2			0x124
> +#define CAL_BYS_CTRL1			0x130
> +#define CAL_BYS_CTRL2			0x134
> +#define CAL_RD_DMA_CTRL			0x140
> +#define CAL_RD_DMA_PIX_ADDR		0x144
> +#define CAL_RD_DMA_PIX_OFST		0x148
> +#define CAL_RD_DMA_XSIZE		0x14c
> +#define CAL_RD_DMA_YSIZE		0x150
> +#define CAL_RD_DMA_INIT_ADDR		0x154
> +#define CAL_RD_DMA_INIT_OFST		0x168
> +#define CAL_RD_DMA_CTRL2		0x16c
> +#define CAL_WR_DMA_CTRL(m)		(0x200U + ((m-1) * 0x10U))
> +#define CAL_WR_DMA_ADDR(m)		(0x204U + ((m-1) * 0x10U))
> +#define CAL_WR_DMA_OFST(m)		(0x208U + ((m-1) * 0x10U))
> +#define CAL_WR_DMA_XSIZE(m)		(0x20cU + ((m-1) * 0x10U))
> +#define CAL_CSI2_PPI_CTRL(m)		(0x300U + ((m-1) * 0x80U))
> +#define CAL_CSI2_COMPLEXIO_CFG(m)	(0x304U + ((m-1) * 0x80U))
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS(m)	(0x308U + ((m-1) * 0x80U))
> +#define CAL_CSI2_SHORT_PACKET(m)	(0x30cU + ((m-1) * 0x80U))
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE(m)	(0x310U + ((m-1) * 0x80U))
> +#define CAL_CSI2_TIMING(m)		(0x314U + ((m-1) * 0x80U))
> +#define CAL_CSI2_VC_IRQENABLE(m)	(0x318U + ((m-1) * 0x80U))
> +#define CAL_CSI2_VC_IRQSTATUS(m)	(0x328U + ((m-1) * 0x80U))
> +#define CAL_CSI2_CTX0(m)		(0x330U + ((m-1) * 0x80U))
> +#define CAL_CSI2_CTX1(m)		(0x334U + ((m-1) * 0x80U))
> +#define CAL_CSI2_CTX2(m)		(0x338U + ((m-1) * 0x80U))
> +#define CAL_CSI2_CTX3(m)		(0x33cU + ((m-1) * 0x80U))
> +#define CAL_CSI2_CTX4(m)		(0x340U + ((m-1) * 0x80U))
> +#define CAL_CSI2_CTX5(m)		(0x344U + ((m-1) * 0x80U))
> +#define CAL_CSI2_CTX6(m)		(0x348U + ((m-1) * 0x80U))
> +#define CAL_CSI2_CTX7(m)		(0x34cU + ((m-1) * 0x80U))
> +#define CAL_CSI2_STATUS0(m)		(0x350U + ((m-1) * 0x80U))
> +#define CAL_CSI2_STATUS1(m)		(0x354U + ((m-1) * 0x80U))
> +#define CAL_CSI2_STATUS2(m)		(0x358U + ((m-1) * 0x80U))
> +#define CAL_CSI2_STATUS3(m)		(0x35cU + ((m-1) * 0x80U))
> +#define CAL_CSI2_STATUS4(m)		(0x360U + ((m-1) * 0x80U))
> +#define CAL_CSI2_STATUS5(m)		(0x364U + ((m-1) * 0x80U))
> +#define CAL_CSI2_STATUS6(m)		(0x368U + ((m-1) * 0x80U))
> +#define CAL_CSI2_STATUS7(m)		(0x36cU + ((m-1) * 0x80U))
> +
> +/* CAL CSI2 PHY register offsets */
> +#define CAL_CSI2_PHY_REG0		0x000
> +#define CAL_CSI2_PHY_REG1		0x004
> +#define CAL_CSI2_PHY_REG2		0x008
> +
> +/* CAL Control Module Core Camerrx Control register offsets */
> +#define CM_CTRL_CORE_CAMERRX_CONTROL	0x000
> +
> +/*********************************************************************
> +* Generic value used in various field below
> +*********************************************************************/
> +
> +#define CAL_GEN_DISABLE			0
> +#define CAL_GEN_ENABLE			1
> +#define CAL_GEN_FALSE			0
> +#define CAL_GEN_TRUE			1
> +
> +/*********************************************************************
> +* Field Definition Macros
> +*********************************************************************/
> +
> +#define CAL_HL_REVISION_MINOR_MASK		0x3f
> +#define CAL_HL_REVISION_MINOR_SHIFT		0
> +#define CAL_HL_REVISION_CUSTOM_MASK		0x03
> +#define CAL_HL_REVISION_CUSTOM_SHIFT		6
> +#define CAL_HL_REVISION_MAJOR_MASK		0x07
> +#define CAL_HL_REVISION_MAJOR_SHIFT		8
> +#define CAL_HL_REVISION_RTL_MASK		0x1f
> +#define CAL_HL_REVISION_RTL_SHIFT		11
> +#define CAL_HL_REVISION_FUNC_MASK		0xfff
> +#define CAL_HL_REVISION_FUNC_SHIFT		16
> +#define CAL_HL_REVISION_SCHEME_MASK		0x03
> +#define CAL_HL_REVISION_SCHEME_SHIFT		30
> +#define CAL_HL_REVISION_SCHEME_H08			1
> +#define CAL_HL_REVISION_SCHEME_LEGACY			0
> +
> +#define CAL_HL_HWINFO_WFIFO_MASK		0xf
> +#define CAL_HL_HWINFO_WFIFO_SHIFT		0
> +#define CAL_HL_HWINFO_RFIFO_MASK		0xf
> +#define CAL_HL_HWINFO_RFIFO_SHIFT		4
> +#define CAL_HL_HWINFO_PCTX_MASK			0x1f
> +#define CAL_HL_HWINFO_PCTX_SHIFT		8
> +#define CAL_HL_HWINFO_WCTX_MASK			0x3f
> +#define CAL_HL_HWINFO_WCTX_SHIFT		13
> +#define CAL_HL_HWINFO_VFIFO_MASK		0xf
> +#define CAL_HL_HWINFO_VFIFO_SHIFT		19
> +#define CAL_HL_HWINFO_NCPORT_MASK		0x1f
> +#define CAL_HL_HWINFO_NCPORT_SHIFT		23
> +#define CAL_HL_HWINFO_NPPI_CTXS0_MASK		0x3
> +#define CAL_HL_HWINFO_NPPI_CTXS0_SHIFT		28
> +#define CAL_HL_HWINFO_NPPI_CTXS1_MASK		0x3
> +#define CAL_HL_HWINFO_NPPI_CTXS1_SHIFT		30
> +#define CAL_HL_HWINFO_NPPI_CONTEXTS_ZERO		0
> +#define CAL_HL_HWINFO_NPPI_CONTEXTS_FOUR		1
> +#define CAL_HL_HWINFO_NPPI_CONTEXTS_EIGHT		2
> +#define CAL_HL_HWINFO_NPPI_CONTEXTS_RESERVED		3
> +
> +#define CAL_HL_SYSCONFIG_SOFTRESET_MASK		0x01
> +#define CAL_HL_SYSCONFIG_SOFTRESET_SHIFT	0
> +#define CAL_HL_SYSCONFIG_SOFTRESET_DONE			0x0
> +#define CAL_HL_SYSCONFIG_SOFTRESET_PENDING		0x1
> +#define CAL_HL_SYSCONFIG_SOFTRESET_NOACTION		0x0
> +#define CAL_HL_SYSCONFIG_SOFTRESET_RESET		0x1
> +#define CAL_HL_SYSCONFIG_IDLE_MASK		0x03
> +#define CAL_HL_SYSCONFIG_IDLE_SHIFT		2
> +#define CAL_HL_SYSCONFIG_IDLEMODE_FORCE			0
> +#define CAL_HL_SYSCONFIG_IDLEMODE_NO			1
> +#define CAL_HL_SYSCONFIG_IDLEMODE_SMART1		2
> +#define CAL_HL_SYSCONFIG_IDLEMODE_SMART2		3
> +
> +#define CAL_HL_IRQ_EOI_LINE_NUMBER_MASK		0x0001
> +#define CAL_HL_IRQ_EOI_LINE_NUMBER_SHIFT	0
> +#define CAL_HL_IRQ_EOI_LINE_NUMBER_READ0		0
> +#define CAL_HL_IRQ_EOI_LINE_NUMBER_EOI0			0
> +
> +#define CAL_HL_IRQ_SHIFT(m)			(m-1)
> +/*#define CAL_HL_IRQ_MASK(m)			(0x1 << (m-1)) */
> +#define CAL_HL_IRQ_MASK(m)			0x1
> +#define CAL_HL_IRQ_NOACTION				0x0
> +#define CAL_HL_IRQ_ENABLE				0x1
> +#define CAL_HL_IRQ_CLEAR				0x1
> +#define CAL_HL_IRQ_DISABLED				0x0
> +#define CAL_HL_IRQ_ENABLED				0x1
> +#define CAL_HL_IRQ_PENDING				0x1
> +
> +#define CAL_PIX_PROC_EN_MASK			0x1
> +#define CAL_PIX_PROC_EN_SHIFT			0
> +#define CAL_PIX_PROC_EXTRACT_MASK		0xf
> +#define CAL_PIX_PROC_EXTRACT_SHIFT		1
> +#define CAL_PIX_PROC_EXTRACT_B6				0x0
> +#define CAL_PIX_PROC_EXTRACT_B7				0x1
> +#define CAL_PIX_PROC_EXTRACT_B8				0x2
> +#define CAL_PIX_PROC_EXTRACT_B10			0x3
> +#define CAL_PIX_PROC_EXTRACT_B10_MIPI			0x4
> +#define CAL_PIX_PROC_EXTRACT_B12			0x5
> +#define CAL_PIX_PROC_EXTRACT_B12_MIPI			0x6
> +#define CAL_PIX_PROC_EXTRACT_B14			0x7
> +#define CAL_PIX_PROC_EXTRACT_B14_MIPI			0x8
> +#define CAL_PIX_PROC_EXTRACT_B16_BE			0x9
> +#define CAL_PIX_PROC_EXTRACT_B16_LE			0xa
> +#define CAL_PIX_PROC_DPCMD_MASK			0x1f
> +#define CAL_PIX_PROC_DPCMD_SHIFT		5
> +#define CAL_PIX_PROC_DPCMD_BYPASS			0x0
> +#define CAL_PIX_PROC_DPCMD_DPCM_10_8_1			0x2
> +#define CAL_PIX_PROC_DPCMD_DPCM_12_8_1			0x8
> +#define CAL_PIX_PROC_DPCMD_DPCM_10_7_1			0x4
> +#define CAL_PIX_PROC_DPCMD_DPCM_10_7_2			0x5
> +#define CAL_PIX_PROC_DPCMD_DPCM_10_6_1			0x6
> +#define CAL_PIX_PROC_DPCMD_DPCM_10_6_2			0x7
> +#define CAL_PIX_PROC_DPCMD_DPCM_12_7_1			0xa
> +#define CAL_PIX_PROC_DPCMD_DPCM_12_6_1			0xc
> +#define CAL_PIX_PROC_DPCMD_DPCM_14_10			0xe
> +#define CAL_PIX_PROC_DPCMD_DPCM_14_8_1			0x10
> +#define CAL_PIX_PROC_DPCMD_DPCM_16_12_1			0x12
> +#define CAL_PIX_PROC_DPCMD_DPCM_16_10_1			0x14
> +#define CAL_PIX_PROC_DPCMD_DPCM_16_8_1			0x16
> +#define CAL_PIX_PROC_DPCME_MASK			0x1f
> +#define CAL_PIX_PROC_DPCME_SHIFT		11
> +#define CAL_PIX_PROC_DPCME_BYPASS			0x0
> +#define CAL_PIX_PROC_DPCME_DPCM_10_8_1			0x2
> +#define CAL_PIX_PROC_DPCME_DPCM_12_8_1			0x8
> +#define CAL_PIX_PROC_DPCME_DPCM_14_10			0xe
> +#define CAL_PIX_PROC_DPCME_DPCM_14_8_1			0x10
> +#define CAL_PIX_PROC_DPCME_DPCM_16_12_1			0x12
> +#define CAL_PIX_PROC_DPCME_DPCM_16_10_1			0x14
> +#define CAL_PIX_PROC_DPCME_DPCM_16_8_1			0x16
> +#define CAL_PIX_PROC_PACK_MASK			0x7
> +#define CAL_PIX_PROC_PACK_SHIFT			16
> +#define CAL_PIX_PROC_PACK_B8				0x0
> +#define CAL_PIX_PROC_PACK_B10_MIPI			0x2
> +#define CAL_PIX_PROC_PACK_B12				0x3
> +#define CAL_PIX_PROC_PACK_B12_MIPI			0x4
> +#define CAL_PIX_PROC_PACK_B16				0x5
> +#define CAL_PIX_PROC_PACK_ARGB				0x6
> +#define CAL_PIX_PROC_CPORT_MASK			0x1f
> +#define CAL_PIX_PROC_CPORT_SHIFT		19
> +
> +#define CAL_CTRL_POSTED_WRITES_MASK		0x1
> +#define CAL_CTRL_POSTED_WRITES_SHIFT		0
> +#define CAL_CTRL_POSTED_WRITES_NONPOSTED		0
> +#define CAL_CTRL_POSTED_WRITES				1
> +#define CAL_CTRL_TAGCNT_MASK			0xf
> +#define CAL_CTRL_TAGCNT_SHIFT			1
> +#define CAL_CTRL_BURSTSIZE_MASK			0x3
> +#define CAL_CTRL_BURSTSIZE_SHIFT		5
> +#define CAL_CTRL_BURSTSIZE_BURST16			0x0
> +#define CAL_CTRL_BURSTSIZE_BURST32			0x1
> +#define CAL_CTRL_BURSTSIZE_BURST64			0x2
> +#define CAL_CTRL_BURSTSIZE_BURST128			0x3
> +#define CAL_CTRL_LL_FORCE_STATE_MASK		0x3f
> +#define CAL_CTRL_LL_FORCE_STATE_SHIFT		7
> +#define CAL_CTRL_MFLAGL_MASK			0xff
> +#define CAL_CTRL_MFLAGL_SHIFT			13
> +#define CAL_CTRL_PWRSCPCLK_MASK			0x1
> +#define CAL_CTRL_PWRSCPCLK_SHIFT		21
> +#define CAL_CTRL_PWRSCPCLK_AUTO				0
> +#define CAL_CTRL_PWRSCPCLK_FORCE			1
> +#define CAL_CTRL_RD_DMA_STALL_MASK		0x1
> +#define CAL_CTRL_RD_DMA_STALL_SHIFT		22
> +#define CAL_CTRL_MFLAGH_MASK			0xff
> +#define CAL_CTRL_MFLAGH_SHIFT			24
> +
> +#define CAL_CTRL1_PPI_GROUPING_MASK		0x3
> +#define CAL_CTRL1_PPI_GROUPING_SHIFT		0
> +#define CAL_CTRL1_PPI_GROUPING_DISABLED			0
> +#define CAL_CTRL1_PPI_GROUPING_RESERVED			1
> +#define CAL_CTRL1_PPI_GROUPING_0			2
> +#define CAL_CTRL1_PPI_GROUPING_1			3
> +#define CAL_CTRL1_INTERLEAVE01_MASK		0x3
> +#define CAL_CTRL1_INTERLEAVE01_SHIFT		2
> +#define CAL_CTRL1_INTERLEAVE01_DISABLED			0
> +#define CAL_CTRL1_INTERLEAVE01_PIX1			1
> +#define CAL_CTRL1_INTERLEAVE01_PIX4			2
> +#define CAL_CTRL1_INTERLEAVE01_RESERVED			3
> +#define CAL_CTRL1_INTERLEAVE23_MASK		0x3
> +#define CAL_CTRL1_INTERLEAVE23_SHIFT		4
> +#define CAL_CTRL1_INTERLEAVE23_DISABLED			0
> +#define CAL_CTRL1_INTERLEAVE23_PIX1			1
> +#define CAL_CTRL1_INTERLEAVE23_PIX4			2
> +#define CAL_CTRL1_INTERLEAVE23_RESERVED			3
> +
> +#define CAL_LINE_NUMBER_EVT_CPORT_MASK		0x1f
> +#define CAL_LINE_NUMBER_EVT_CPORT_SHIFT		0
> +#define CAL_LINE_NUMBER_EVT_MASK		0x3fff
> +#define CAL_LINE_NUMBER_EVT_SHIFT		16
> +
> +#define CAL_VPORT_CTRL1_PCLK_SHIFT		0
> +#define CAL_VPORT_CTRL1_PCLK_MASK		0x1ffff
> +#define CAL_VPORT_CTRL1_XBLK_SHIFT		17
> +#define CAL_VPORT_CTRL1_XBLK_MASK		0xff
> +#define CAL_VPORT_CTRL1_YBLK_SHIFT		25
> +#define CAL_VPORT_CTRL1_YBLK_MASK		0x3f
> +#define CAL_VPORT_CTRL1_WIDTH_SHIFT		31
> +#define CAL_VPORT_CTRL1_WIDTH_MASK		0x1
> +#define CAL_VPORT_CTRL1_WIDTH_ONE			0
> +#define CAL_VPORT_CTRL1_WIDTH_TWO			1
> +
> +#define CAL_VPORT_CTRL2_CPORT_SHIFT		0
> +#define CAL_VPORT_CTRL2_CPORT_MASK		0x1f
> +#define CAL_VPORT_CTRL2_FREERUNNING_SHIFT	15
> +#define CAL_VPORT_CTRL2_FREERUNNING_MASK	0x1
> +#define CAL_VPORT_CTRL2_FREERUNNING_GATED		0
> +#define CAL_VPORT_CTRL2_FREERUNNING_FREE		1
> +#define CAL_VPORT_CTRL2_FS_RESETS_SHIFT		16
> +#define CAL_VPORT_CTRL2_FS_RESETS_MASK		0x1
> +#define CAL_VPORT_CTRL2_FS_RESETS_NO			0
> +#define CAL_VPORT_CTRL2_FS_RESETS_YES			1
> +#define CAL_VPORT_CTRL2_FSM_RESET_SHIFT		17
> +#define CAL_VPORT_CTRL2_FSM_RESET_MASK		0x1
> +#define CAL_VPORT_CTRL2_FSM_RESET_NOEFFECT		0
> +#define CAL_VPORT_CTRL2_FSM_RESET			1
> +#define CAL_VPORT_CTRL2_RDY_THR_SHIFT		18
> +#define CAL_VPORT_CTRL2_RDY_THR_MASK		0x3fff
> +
> +#define CAL_BYS_CTRL1_PCLK_SHIFT		0
> +#define CAL_BYS_CTRL1_PCLK_MASK			0x1ffff
> +#define CAL_BYS_CTRL1_XBLK_SHIFT		17
> +#define CAL_BYS_CTRL1_XBLK_MASK			0xff
> +#define CAL_BYS_CTRL1_YBLK_SHIFT		25
> +#define CAL_BYS_CTRL1_YBLK_MASK			0x3f
> +#define CAL_BYS_CTRL1_BYSINEN_SHIFT		31
> +#define CAL_BYS_CTRL1_BYSINEN_MASK		0x1
> +
> +#define CAL_BYS_CTRL2_CPORTIN_SHIFT		0
> +#define CAL_BYS_CTRL2_CPORTIN_MASK		0x1f
> +#define CAL_BYS_CTRL2_CPORTOUT_SHIFT		5
> +#define CAL_BYS_CTRL2_CPORTOUT_MASK		0x1f
> +#define CAL_BYS_CTRL2_DUPLICATEDDATA_SHIFT	10
> +#define CAL_BYS_CTRL2_DUPLICATEDDATA_MASK	0x1
> +#define CAL_BYS_CTRL2_DUPLICATEDDATA_NO			0
> +#define CAL_BYS_CTRL2_DUPLICATEDDATA_YES		1
> +#define CAL_BYS_CTRL2_FREERUNNING_SHIFT		11
> +#define CAL_BYS_CTRL2_FREERUNNING_MASK		0x1
> +#define CAL_BYS_CTRL2_FREERUNNING_NO			0
> +#define CAL_BYS_CTRL2_FREERUNNING_YES			1
> +
> +#define CAL_RD_DMA_CTRL_GO_SHIFT		0
> +#define CAL_RD_DMA_CTRL_GO_MASK			0x1
> +#define CAL_RD_DMA_CTRL_GO_DIS				0
> +#define CAL_RD_DMA_CTRL_GO_EN				1
> +#define CAL_RD_DMA_CTRL_GO_IDLE				0
> +#define CAL_RD_DMA_CTRL_GO_BUSY				1
> +#define CAL_RD_DMA_CTRL_INIT_SHIFT		1
> +#define CAL_RD_DMA_CTRL_INIT_MASK		0x1
> +#define CAL_RD_DMA_CTRL_BW_LIMITER_SHIFT	2
> +#define CAL_RD_DMA_CTRL_BW_LIMITER_MASK		0x1ff
> +#define CAL_RD_DMA_CTRL_OCP_TAG_CNT_SHIFT	11
> +#define CAL_RD_DMA_CTRL_OCP_TAG_CNT_MASK	0xf
> +#define CAL_RD_DMA_CTRL_PCLK_SHIFT		15
> +#define CAL_RD_DMA_CTRL_PCLK_MASK		0x1ffff
> +
> +#define CAL_RD_DMA_PIX_ADDR_SHIFT		3
> +#define CAL_RD_DMA_PIX_ADDR_MASK		0x1fffffff
> +
> +#define CAL_RD_DMA_PIX_OFST_SHIFT		4
> +#define CAL_RD_DMA_PIX_OFST_MASK		0xfffffff
> +
> +#define CAL_RD_DMA_XSIZE_SHIFT			19
> +#define CAL_RD_DMA_XSIZE_MASK			0x1fff
> +
> +#define CAL_RD_DMA_YSIZE_SHIFT			16
> +#define CAL_RD_DMA_YSIZE_MASK			0x3fff
> +
> +#define CAL_RD_DMA_INIT_ADDR_SHIFT		3
> +#define CAL_RD_DMA_INIT_ADDR_MASK		0x1fffffff
> +
> +#define CAL_RD_DMA_INIT_OFST_SHIFT		3
> +#define CAL_RD_DMA_INIT_OFST_MASK		0x1fffffff
> +
> +#define CAL_RD_DMA_CTRL2_CIRC_MODE_SHIFT	0
> +#define CAL_RD_DMA_CTRL2_CIRC_MODE_MASK		0x7
> +#define CAL_RD_DMA_CTRL2_CIRC_MODE_DIS			0
> +#define CAL_RD_DMA_CTRL2_CIRC_MODE_ONE			1
> +#define CAL_RD_DMA_CTRL2_CIRC_MODE_FOUR			2
> +#define CAL_RD_DMA_CTRL2_CIRC_MODE_SIXTEEN		3
> +#define CAL_RD_DMA_CTRL2_CIRC_MODE_SIXTYFOUR		4
> +#define CAL_RD_DMA_CTRL2_CIRC_MODE_RESERVED		5
> +#define CAL_RD_DMA_CTRL2_ICM_CSTART_SHIFT	3
> +#define CAL_RD_DMA_CTRL2_ICM_CSTART_MASK	0x1
> +#define CAL_RD_DMA_CTRL2_PATTERN_SHIFT		4
> +#define CAL_RD_DMA_CTRL2_PATTERN_MASK		0x3
> +#define CAL_RD_DMA_CTRL2_PATTERN_LINEAR			0
> +#define CAL_RD_DMA_CTRL2_PATTERN_YUV420			1
> +#define CAL_RD_DMA_CTRL2_PATTERN_RD2SKIP2		2
> +#define CAL_RD_DMA_CTRL2_PATTERN_RD2SKIP4		3
> +#define CAL_RD_DMA_CTRL2_BYSOUT_LE_WAIT_SHIFT	6
> +#define CAL_RD_DMA_CTRL2_BYSOUT_LE_WAIT_MASK	0x1
> +#define CAL_RD_DMA_CTRL2_BYSOUT_LE_WAIT_FREERUNNING	0
> +#define CAL_RD_DMA_CTRL2_BYSOUT_LE_WAIT_WAITFORBYSOUT	1
> +#define CAL_RD_DMA_CTRL2_CIRC_SIZE_SHIFT	16
> +#define CAL_RD_DMA_CTRL2_CIRC_SIZE_MASK		0x3fff
> +
> +#define CAL_WR_DMA_CTRL_MODE_SHIFT		0
> +#define CAL_WR_DMA_CTRL_MODE_MASK		0x7
> +#define CAL_WR_DMA_CTRL_MODE_DIS			0
> +#define CAL_WR_DMA_CTRL_MODE_SHD			1
> +#define CAL_WR_DMA_CTRL_MODE_CNT			2
> +#define CAL_WR_DMA_CTRL_MODE_CNT_INIT			3
> +#define CAL_WR_DMA_CTRL_MODE_CONST			4
> +#define CAL_WR_DMA_CTRL_MODE_RESERVED			5
> +#define CAL_WR_DMA_CTRL_PATTERN_SHIFT		3
> +#define CAL_WR_DMA_CTRL_PATTERN_MASK		0x3
> +#define CAL_WR_DMA_CTRL_PATTERN_LINEAR			0
> +#define CAL_WR_DMA_CTRL_PATTERN_WR2SKIP2		2
> +#define CAL_WR_DMA_CTRL_PATTERN_WR2SKIP4		3
> +#define CAL_WR_DMA_CTRL_PATTERN_RESERVED		1
> +#define CAL_WR_DMA_CTRL_ICM_PSTART_SHIFT	5
> +#define CAL_WR_DMA_CTRL_ICM_PSTART_MASK		0x1
> +#define CAL_WR_DMA_CTRL_DTAG_SHIFT		6
> +#define CAL_WR_DMA_CTRL_DTAG_MASK		0x7
> +#define CAL_WR_DMA_CTRL_DTAG_ATT_HDR			0
> +#define CAL_WR_DMA_CTRL_DTAG_ATT_DAT			1
> +#define CAL_WR_DMA_CTRL_DTAG				2
> +#define CAL_WR_DMA_CTRL_DTAG_PIX_HDR			3
> +#define CAL_WR_DMA_CTRL_DTAG_PIX_DAT			4
> +#define CAL_WR_DMA_CTRL_DTAG_D5				5
> +#define CAL_WR_DMA_CTRL_DTAG_D6				6
> +#define CAL_WR_DMA_CTRL_DTAG_D7				7
> +#define CAL_WR_DMA_CTRL_CPORT_SHIFT		9
> +#define CAL_WR_DMA_CTRL_CPORT_MASK		0x1f
> +#define CAL_WR_DMA_CTRL_STALL_RD_SHIFT		14
> +#define CAL_WR_DMA_CTRL_STALL_RD_MASK		0x1
> +#define CAL_WR_DMA_CTRL_YSIZE_SHIFT		18
> +#define CAL_WR_DMA_CTRL_YSIZE_MASK		0x3fff
> +
> +#define CAL_WR_DMA_ADDR_SHIFT			4
> +#define CAL_WR_DMA_ADDR_MASK			0xfffffff
> +
> +#define CAL_WR_DMA_OFST_SHIFT			4
> +#define CAL_WR_DMA_OFST_MASK			0x7fff
> +#define CAL_WR_DMA_OFST_CIRC_MODE_SHIFT		22
> +#define CAL_WR_DMA_OFST_CIRC_MODE_MASK		0x3
> +#define CAL_WR_DMA_OFST_CIRC_MODE_ONE			1
> +#define CAL_WR_DMA_OFST_CIRC_MODE_FOUR			2
> +#define CAL_WR_DMA_OFST_CIRC_MODE_SIXTYFOUR		3
> +#define CAL_WR_DMA_OFST_CIRC_MODE_DISABLED		0
> +#define CAL_WR_DMA_OFST_CIRC_SIZE_SHIFT		24
> +#define CAL_WR_DMA_OFST_CIRC_SIZE_MASK		0xff
> +
> +#define CAL_WR_DMA_XSIZE_XSKIP_SHIFT		3
> +#define CAL_WR_DMA_XSIZE_XSKIP_MASK		0x1fff
> +#define CAL_WR_DMA_XSIZE_SHIFT			19
> +#define CAL_WR_DMA_XSIZE_MASK			0x1fff
> +
> +#define CAL_CSI2_PPI_CTRL_IF_EN_SHIFT		0
> +#define CAL_CSI2_PPI_CTRL_IF_EN_MASK		0x1
> +#define CAL_CSI2_PPI_CTRL_ECC_EN_SHIFT		2
> +#define CAL_CSI2_PPI_CTRL_ECC_EN_MASK		0x1
> +#define CAL_CSI2_PPI_CTRL_FRAME_SHIFT		3
> +#define CAL_CSI2_PPI_CTRL_FRAME_MASK		0x1
> +#define CAL_CSI2_PPI_CTRL_FRAME_IMMEDIATE		0
> +#define CAL_CSI2_PPI_CTRL_FRAME				1
> +
> +#define CAL_CSI2_COMPLEXIO_CFG_CLOCK_POSITION_SHIFT	0
> +#define CAL_CSI2_COMPLEXIO_CFG_CLOCK_POSITION_MASK	0x7
> +#define CAL_CSI2_COMPLEXIO_CFG_POSITION_5			5
> +#define CAL_CSI2_COMPLEXIO_CFG_POSITION_4			4
> +#define CAL_CSI2_COMPLEXIO_CFG_POSITION_3			3
> +#define CAL_CSI2_COMPLEXIO_CFG_POSITION_2			2
> +#define CAL_CSI2_COMPLEXIO_CFG_POSITION_1			1
> +#define CAL_CSI2_COMPLEXIO_CFG_POSITION_NOT_USED		0
> +#define CAL_CSI2_COMPLEXIO_CFG_CLOCK_POL_SHIFT		3
> +#define CAL_CSI2_COMPLEXIO_CFG_CLOCK_POL_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_CFG_POL_PLUSMINUS			0
> +#define CAL_CSI2_COMPLEXIO_CFG_POL_MINUSPLUS			1
> +#define CAL_CSI2_COMPLEXIO_CFG_DATA1_POSITION_SHIFT	4
> +#define CAL_CSI2_COMPLEXIO_CFG_DATA1_POSITION_MASK	0x7
> +#define CAL_CSI2_COMPLEXIO_CFG_DATA1_POL_SHIFT		7
> +#define CAL_CSI2_COMPLEXIO_CFG_DATA1_POL_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_CFG_DATA2_POSITION_SHIFT	8
> +#define CAL_CSI2_COMPLEXIO_CFG_DATA2_POSITION_MASK	0x7
> +#define CAL_CSI2_COMPLEXIO_CFG_DATA2_POL_SHIFT		11
> +#define CAL_CSI2_COMPLEXIO_CFG_DATA2_POL_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_CFG_DATA3_POSITION_SHIFT	12
> +#define CAL_CSI2_COMPLEXIO_CFG_DATA3_POSITION_MASK	0x7
> +#define CAL_CSI2_COMPLEXIO_CFG_DATA3_POL_SHIFT		15
> +#define CAL_CSI2_COMPLEXIO_CFG_DATA3_POL_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_CFG_DATA4_POSITION_SHIFT	16
> +#define CAL_CSI2_COMPLEXIO_CFG_DATA4_POSITION_MASK	0x7
> +#define CAL_CSI2_COMPLEXIO_CFG_DATA4_POL_SHIFT		19
> +#define CAL_CSI2_COMPLEXIO_CFG_DATA4_POL_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_CFG_PWR_AUTO_SHIFT		24
> +#define CAL_CSI2_COMPLEXIO_CFG_PWR_AUTO_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_SHIFT		25
> +#define CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_MASK		0x3
> +#define CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_STATE_OFF		0
> +#define CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_STATE_ON		1
> +#define CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_STATE_ULP		2
> +#define CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_SHIFT		27
> +#define CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_MASK		0x3
> +#define CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_OFF		0
> +#define CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_ON			1
> +#define CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_ULP		2
> +#define CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_SHIFT		29
> +#define CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_RESETCOMPLETED	1
> +#define CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_RESETONGOING		0
> +#define CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_SHIFT		30
> +#define CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL			0
> +#define CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_OPERATIONAL		1
> +
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRSOTHS1_SHIFT		0
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRSOTHS1_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRSOTHS2_SHIFT		1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRSOTHS2_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRSOTHS3_SHIFT		2
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRSOTHS3_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRSOTHS4_SHIFT		3
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRSOTHS4_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRSOTHS5_SHIFT		4
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRSOTHS5_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRSOTSYNCHS1_SHIFT	5
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRSOTSYNCHS1_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRSOTSYNCHS2_SHIFT	6
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRSOTSYNCHS2_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRSOTSYNCHS3_SHIFT	7
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRSOTSYNCHS3_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRSOTSYNCHS4_SHIFT	8
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRSOTSYNCHS4_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRSOTSYNCHS5_SHIFT	9
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRSOTSYNCHS5_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRESC1_SHIFT		10
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRESC1_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRESC2_SHIFT		11
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRESC2_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRESC3_SHIFT		12
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRESC3_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRESC4_SHIFT		13
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRESC4_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRESC5_SHIFT		14
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRESC5_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRCONTROL1_SHIFT		15
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRCONTROL1_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRCONTROL2_SHIFT		16
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRCONTROL2_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRCONTROL3_SHIFT		17
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRCONTROL3_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRCONTROL4_SHIFT		18
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRCONTROL4_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRCONTROL5_SHIFT		19
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ERRCONTROL5_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_STATEULPM1_SHIFT		20
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_STATEULPM1_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_STATEULPM2_SHIFT		21
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_STATEULPM2_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_STATEULPM3_SHIFT		22
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_STATEULPM3_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_STATEULPM4_SHIFT		23
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_STATEULPM4_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_STATEULPM5_SHIFT		24
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_STATEULPM5_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_STATEALLULPMENTER_SHIFT	25
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_STATEALLULPMENTER_MASK	0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_STATEALLULPMEXIT_SHIFT	26
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_STATEALLULPMEXIT_MASK	0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_FIFO_OVR_SHIFT		27
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_FIFO_OVR_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_SHORT_PACKET_SHIFT		28
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_SHORT_PACKET_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ECC_NO_CORRECTION_SHIFT	30
> +#define CAL_CSI2_COMPLEXIO_IRQSTATUS_ECC_NO_CORRECTION_MASK	0x1
> +
> +#define CAL_CSI2_SHORT_PACKET_SHIFT	0
> +#define CAL_CSI2_SHORT_PACKET_MASK	0xffffff
> +
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRSOTHS1_SHIFT		0
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRSOTHS1_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRSOTHS2_SHIFT		1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRSOTHS2_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRSOTHS3_SHIFT		2
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRSOTHS3_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRSOTHS4_SHIFT		3
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRSOTHS4_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRSOTHS5_SHIFT		4
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRSOTHS5_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRSOTSYNCHS1_SHIFT	5
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRSOTSYNCHS1_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRSOTSYNCHS2_SHIFT	6
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRSOTSYNCHS2_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRSOTSYNCHS3_SHIFT	7
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRSOTSYNCHS3_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRSOTSYNCHS4_SHIFT	8
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRSOTSYNCHS4_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRSOTSYNCHS5_SHIFT	9
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRSOTSYNCHS5_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRESC1_SHIFT		10
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRESC1_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRESC2_SHIFT		11
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRESC2_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRESC3_SHIFT		12
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRESC3_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRESC4_SHIFT		13
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRESC4_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRESC5_SHIFT		14
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRESC5_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRCONTROL1_SHIFT		15
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRCONTROL1_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRCONTROL2_SHIFT		16
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRCONTROL2_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRCONTROL3_SHIFT		17
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRCONTROL3_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRCONTROL4_SHIFT		18
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRCONTROL4_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRCONTROL5_SHIFT		19
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ERRCONTROL5_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_STATEULPM1_SHIFT		20
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_STATEULPM1_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_STATEULPM2_SHIFT		21
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_STATEULPM2_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_STATEULPM3_SHIFT		22
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_STATEULPM3_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_STATEULPM4_SHIFT		23
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_STATEULPM4_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_STATEULPM5_SHIFT		24
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_STATEULPM5_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_STATEALLULPMENTER_SHIFT	25
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_STATEALLULPMENTER_MASK	0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_STATEALLULPMEXIT_SHIFT	26
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_STATEALLULPMEXIT_MASK	0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_FIFO_OVR_SHIFT		27
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_FIFO_OVR_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_SHORT_PACKET_SHIFT		28
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_SHORT_PACKET_MASK		0x1
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ECC_NO_CORRECTION_SHIFT	30
> +#define CAL_CSI2_COMPLEXIO_IRQENABLE_ECC_NO_CORRECTION_MASK	0x1
> +
> +#define CAL_CSI2_TIMING_STOP_STATE_COUNTER_IO1_SHIFT	0
> +#define CAL_CSI2_TIMING_STOP_STATE_COUNTER_IO1_MASK	0x1fff
> +#define CAL_CSI2_TIMING_STOP_STATE_X4_IO1_SHIFT		13
> +#define CAL_CSI2_TIMING_STOP_STATE_X4_IO1_MASK		0x1
> +#define CAL_CSI2_TIMING_STOP_STATE_X16_IO1_SHIFT	14
> +#define CAL_CSI2_TIMING_STOP_STATE_X16_IO1_MASK		0x1
> +#define CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_SHIFT		15
> +#define CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK		0x1
> +
> +#define CAL_CSI2_VC_IRQENABLE_FS_IRQ_0_SHIFT			0
> +#define CAL_CSI2_VC_IRQENABLE_FS_IRQ_0_MASK			0x1
> +#define CAL_CSI2_VC_IRQENABLE_FE_IRQ_0_SHIFT			1
> +#define CAL_CSI2_VC_IRQENABLE_FE_IRQ_0_MASK			0x1
> +#define CAL_CSI2_VC_IRQENABLE_LS_IRQ_0_SHIFT			2
> +#define CAL_CSI2_VC_IRQENABLE_LS_IRQ_0_MASK			0x1
> +#define CAL_CSI2_VC_IRQENABLE_LE_IRQ_0_SHIFT			3
> +#define CAL_CSI2_VC_IRQENABLE_LE_IRQ_0_MASK			0x1
> +#define CAL_CSI2_VC_IRQENABLE_CS_IRQ_0_SHIFT			4
> +#define CAL_CSI2_VC_IRQENABLE_CS_IRQ_0_MASK			0x1
> +#define CAL_CSI2_VC_IRQENABLE_ECC_CORRECTION0_IRQ_0_SHIFT	5
> +#define CAL_CSI2_VC_IRQENABLE_ECC_CORRECTION0_IRQ_0_MASK	0x1
> +#define CAL_CSI2_VC_IRQENABLE_FS_IRQ_1_SHIFT			8
> +#define CAL_CSI2_VC_IRQENABLE_FS_IRQ_1_MASK			0x1
> +#define CAL_CSI2_VC_IRQENABLE_FE_IRQ_1_SHIFT			9
> +#define CAL_CSI2_VC_IRQENABLE_FE_IRQ_1_MASK			0x1
> +#define CAL_CSI2_VC_IRQENABLE_LS_IRQ_1_SHIFT			10
> +#define CAL_CSI2_VC_IRQENABLE_LS_IRQ_1_MASK			0x1
> +#define CAL_CSI2_VC_IRQENABLE_LE_IRQ_1_SHIFT			11
> +#define CAL_CSI2_VC_IRQENABLE_LE_IRQ_1_MASK			0x1
> +#define CAL_CSI2_VC_IRQENABLE_CS_IRQ_1_SHIFT			12
> +#define CAL_CSI2_VC_IRQENABLE_CS_IRQ_1_MASK			0x1
> +#define CAL_CSI2_VC_IRQENABLE_ECC_CORRECTION0_IRQ_1_SHIFT	13
> +#define CAL_CSI2_VC_IRQENABLE_ECC_CORRECTION0_IRQ_1_MASK	0x1
> +#define CAL_CSI2_VC_IRQENABLE_FS_IRQ_2_SHIFT			16
> +#define CAL_CSI2_VC_IRQENABLE_FS_IRQ_2_MASK			0x1
> +#define CAL_CSI2_VC_IRQENABLE_FE_IRQ_2_SHIFT			17
> +#define CAL_CSI2_VC_IRQENABLE_FE_IRQ_2_MASK			0x1
> +#define CAL_CSI2_VC_IRQENABLE_LS_IRQ_2_SHIFT			18
> +#define CAL_CSI2_VC_IRQENABLE_LS_IRQ_2_MASK			0x1
> +#define CAL_CSI2_VC_IRQENABLE_LE_IRQ_2_SHIFT			19
> +#define CAL_CSI2_VC_IRQENABLE_LE_IRQ_2_MASK			0x1
> +#define CAL_CSI2_VC_IRQENABLE_CS_IRQ_2_SHIFT			20
> +#define CAL_CSI2_VC_IRQENABLE_CS_IRQ_2_MASK			0x1
> +#define CAL_CSI2_VC_IRQENABLE_ECC_CORRECTION0_IRQ_2_SHIFT	21
> +#define CAL_CSI2_VC_IRQENABLE_ECC_CORRECTION0_IRQ_2_MASK	0x1
> +#define CAL_CSI2_VC_IRQENABLE_FS_IRQ_3_SHIFT			24
> +#define CAL_CSI2_VC_IRQENABLE_FS_IRQ_3_MASK			0x1
> +#define CAL_CSI2_VC_IRQENABLE_FE_IRQ_3_SHIFT			25
> +#define CAL_CSI2_VC_IRQENABLE_FE_IRQ_3_MASK			0x1
> +#define CAL_CSI2_VC_IRQENABLE_LS_IRQ_3_SHIFT			26
> +#define CAL_CSI2_VC_IRQENABLE_LS_IRQ_3_MASK			0x1
> +#define CAL_CSI2_VC_IRQENABLE_LE_IRQ_3_SHIFT			27
> +#define CAL_CSI2_VC_IRQENABLE_LE_IRQ_3_MASK			0x1
> +#define CAL_CSI2_VC_IRQENABLE_CS_IRQ_3_SHIFT			28
> +#define CAL_CSI2_VC_IRQENABLE_CS_IRQ_3_MASK			0x1
> +#define CAL_CSI2_VC_IRQENABLE_ECC_CORRECTION0_IRQ_3_SHIFT	29
> +#define CAL_CSI2_VC_IRQENABLE_ECC_CORRECTION0_IRQ_3_MASK	0x1
> +
> +#define CAL_CSI2_VC_IRQSTATUS_FS_IRQ_0_SHIFT			0
> +#define CAL_CSI2_VC_IRQSTATUS_FS_IRQ_0_MASK			0x1
> +#define CAL_CSI2_VC_IRQSTATUS_FE_IRQ_0_SHIFT			1
> +#define CAL_CSI2_VC_IRQSTATUS_FE_IRQ_0_MASK			0x1
> +#define CAL_CSI2_VC_IRQSTATUS_LS_IRQ_0_SHIFT			2
> +#define CAL_CSI2_VC_IRQSTATUS_LS_IRQ_0_MASK			0x1
> +#define CAL_CSI2_VC_IRQSTATUS_LE_IRQ_0_SHIFT			3
> +#define CAL_CSI2_VC_IRQSTATUS_LE_IRQ_0_MASK			0x1
> +#define CAL_CSI2_VC_IRQSTATUS_CS_IRQ_0_SHIFT			4
> +#define CAL_CSI2_VC_IRQSTATUS_CS_IRQ_0_MASK			0x1
> +#define CAL_CSI2_VC_IRQSTATUS_ECC_CORRECTION0_IRQ_0_SHIFT	5
> +#define CAL_CSI2_VC_IRQSTATUS_ECC_CORRECTION0_IRQ_0_MASK	0x1
> +#define CAL_CSI2_VC_IRQSTATUS_FS_IRQ_1_SHIFT			8
> +#define CAL_CSI2_VC_IRQSTATUS_FS_IRQ_1_MASK			0x1
> +#define CAL_CSI2_VC_IRQSTATUS_FE_IRQ_1_SHIFT			9
> +#define CAL_CSI2_VC_IRQSTATUS_FE_IRQ_1_MASK			0x1
> +#define CAL_CSI2_VC_IRQSTATUS_LS_IRQ_1_SHIFT			10
> +#define CAL_CSI2_VC_IRQSTATUS_LS_IRQ_1_MASK			0x1
> +#define CAL_CSI2_VC_IRQSTATUS_LE_IRQ_1_SHIFT			11
> +#define CAL_CSI2_VC_IRQSTATUS_LE_IRQ_1_MASK			0x1
> +#define CAL_CSI2_VC_IRQSTATUS_CS_IRQ_1_SHIFT			12
> +#define CAL_CSI2_VC_IRQSTATUS_CS_IRQ_1_MASK			0x1
> +#define CAL_CSI2_VC_IRQSTATUS_ECC_CORRECTION0_IRQ_1_SHIFT	13
> +#define CAL_CSI2_VC_IRQSTATUS_ECC_CORRECTION0_IRQ_1_MASK	0x1
> +#define CAL_CSI2_VC_IRQSTATUS_FS_IRQ_2_SHIFT			16
> +#define CAL_CSI2_VC_IRQSTATUS_FS_IRQ_2_MASK			0x1
> +#define CAL_CSI2_VC_IRQSTATUS_FE_IRQ_2_SHIFT			17
> +#define CAL_CSI2_VC_IRQSTATUS_FE_IRQ_2_MASK			0x1
> +#define CAL_CSI2_VC_IRQSTATUS_LS_IRQ_2_SHIFT			18
> +#define CAL_CSI2_VC_IRQSTATUS_LS_IRQ_2_MASK			0x1
> +#define CAL_CSI2_VC_IRQSTATUS_LE_IRQ_2_SHIFT			19
> +#define CAL_CSI2_VC_IRQSTATUS_LE_IRQ_2_MASK			0x1
> +#define CAL_CSI2_VC_IRQSTATUS_CS_IRQ_2_SHIFT			20
> +#define CAL_CSI2_VC_IRQSTATUS_CS_IRQ_2_MASK			0x1
> +#define CAL_CSI2_VC_IRQSTATUS_ECC_CORRECTION0_IRQ_2_SHIFT	21
> +#define CAL_CSI2_VC_IRQSTATUS_ECC_CORRECTION0_IRQ_2_MASK	0x1
> +#define CAL_CSI2_VC_IRQSTATUS_FS_IRQ_3_SHIFT			24
> +#define CAL_CSI2_VC_IRQSTATUS_FS_IRQ_3_MASK			0x1
> +#define CAL_CSI2_VC_IRQSTATUS_FE_IRQ_3_SHIFT			25
> +#define CAL_CSI2_VC_IRQSTATUS_FE_IRQ_3_MASK			0x1
> +#define CAL_CSI2_VC_IRQSTATUS_LS_IRQ_3_SHIFT			26
> +#define CAL_CSI2_VC_IRQSTATUS_LS_IRQ_3_MASK			0x1
> +#define CAL_CSI2_VC_IRQSTATUS_LE_IRQ_3_SHIFT			27
> +#define CAL_CSI2_VC_IRQSTATUS_LE_IRQ_3_MASK			0x1
> +#define CAL_CSI2_VC_IRQSTATUS_CS_IRQ_3_SHIFT			28
> +#define CAL_CSI2_VC_IRQSTATUS_CS_IRQ_3_MASK			0x1
> +#define CAL_CSI2_VC_IRQSTATUS_ECC_CORRECTION0_IRQ_3_SHIFT	29
> +#define CAL_CSI2_VC_IRQSTATUS_ECC_CORRECTION0_IRQ_3_MASK	0x1
> +
> +#define CAL_CSI2_CTX_DT_SHIFT		0
> +#define CAL_CSI2_CTX_DT_MASK		0x3f
> +#define CAL_CSI2_CTX_VC_SHIFT		6
> +#define CAL_CSI2_CTX_VC_MASK		0x3
> +#define CAL_CSI2_CTX_CPORT_SHIFT	8
> +#define CAL_CSI2_CTX_CPORT_MASK		0x1f
> +#define CAL_CSI2_CTX_ATT_SHIFT		13
> +#define CAL_CSI2_CTX_ATT_MASK		0x1
> +#define CAL_CSI2_CTX_ATT_PIX			0
> +#define CAL_CSI2_CTX_ATT			1
> +#define CAL_CSI2_CTX_PACK_MODE_SHIFT	14
> +#define CAL_CSI2_CTX_PACK_MODE_MASK	0x1
> +#define CAL_CSI2_CTX_PACK_MODE_LINE		0
> +#define CAL_CSI2_CTX_PACK_MODE_FRAME		1
> +#define CAL_CSI2_CTX_LINES_SHIFT	16
> +#define CAL_CSI2_CTX_LINES_MASK		0x3fff
> +
> +#define CAL_CSI2_STATUS_FRAME_SHIF	0
> +#define CAL_CSI2_STATUS_FRAME_MASK	0xffff
> +
> +#define CAL_CSI2_PHY_REG0_THS_SETTLE_SHIFT	0
> +#define CAL_CSI2_PHY_REG0_THS_SETTLE_MASK	0xff
> +#define CAL_CSI2_PHY_REG0_THS_TERM_SHIFT	8
> +#define CAL_CSI2_PHY_REG0_THS_TERM_MASK		0xff
> +#define CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_SHIFT	24
> +#define CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_MASK	0x1
> +#define CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_DISABLE		1
> +#define CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_ENABLE		0
> +
> +#define CAL_CSI2_PHY_REG1_TCLK_SETTLE_SHIFT			0
> +#define CAL_CSI2_PHY_REG1_TCLK_SETTLE_MASK			0xff
> +#define CAL_CSI2_PHY_REG1_CTRLCLK_DIV_FACTOR_SHIFT		8
> +#define CAL_CSI2_PHY_REG1_CTRLCLK_DIV_FACTOR_MASK		0x3
> +#define CAL_CSI2_PHY_REG1_DPHY_HS_SYNC_PATTERN_SHIFT		10
> +#define CAL_CSI2_PHY_REG1_DPHY_HS_SYNC_PATTERN_MASK		0xFF
> +#define CAL_CSI2_PHY_REG1_TCLK_TERM_SHIFT			18
> +#define CAL_CSI2_PHY_REG1_TCLK_TERM_MASK			0x7f
> +#define CAL_CSI2_PHY_REG0_CLOCK_MISS_DETECTOR_STATUS_SHIFT	25
> +#define CAL_CSI2_PHY_REG0_CLOCK_MISS_DETECTOR_STATUS_MASK	0x1
> +#define CAL_CSI2_PHY_REG0_CLOCK_MISS_DETECTOR_STATUS_ERROR		1
> +#define CAL_CSI2_PHY_REG0_CLOCK_MISS_DETECTOR_STATUS_SUCCESS		0
> +#define CAL_CSI2_PHY_REG0_RESET_DONE_STATUS_SHIFT		28
> +#define CAL_CSI2_PHY_REG0_RESET_DONE_STATUS_MASK		0x3
> +
> +#define CAL_CSI2_PHY_REG2_CCP2_SYNC_PATTERN_SHIFT		0
> +#define CAL_CSI2_PHY_REG2_CCP2_SYNC_PATTERN_MASK		0xffffff
> +#define CAL_CSI2_PHY_REG2_TRIGGER_CMD_RXTRIGESC3_SHIFT		24
> +#define CAL_CSI2_PHY_REG2_TRIGGER_CMD_RXTRIGESC3_MASK		0x3
> +#define CAL_CSI2_PHY_REG2_TRIGGER_CMD_RXTRIGESC2_SHIFT		26
> +#define CAL_CSI2_PHY_REG2_TRIGGER_CMD_RXTRIGESC2_MASK		0x3
> +#define CAL_CSI2_PHY_REG2_TRIGGER_CMD_RXTRIGESC1_SHIFT		28
> +#define CAL_CSI2_PHY_REG2_TRIGGER_CMD_RXTRIGESC1_MASK		0x3
> +#define CAL_CSI2_PHY_REG2_TRIGGER_CMD_RXTRIGESC0_SHIFT		30
> +#define CAL_CSI2_PHY_REG2_TRIGGER_CMD_RXTRIGESC0_MASK		0x3
> +
> +#define CM_CAMERRX_CTRL_CSI1_CTRLCLKEN_SHIFT			0
> +#define CM_CAMERRX_CTRL_CSI1_CTRLCLKEN_MASK			0x1
> +#define CM_CAMERRX_CTRL_CSI1_CAMMODE_SHIFT			1
> +#define CM_CAMERRX_CTRL_CSI1_CAMMODE_MASK			0x3
> +#define CM_CAMERRX_CTRL_CSI1_LANEENABLE_SHIFT			3
> +#define CM_CAMERRX_CTRL_CSI1_LANEENABLE_MASK			0x3
> +#define CM_CAMERRX_CTRL_CSI1_MODE_SHIFT				5
> +#define CM_CAMERRX_CTRL_CSI1_MODE_MASK				0x1
> +#define CM_CAMERRX_CTRL_CSI0_CTRLCLKEN_SHIFT			10
> +#define CM_CAMERRX_CTRL_CSI0_CTRLCLKEN_MASK			0x1
> +#define CM_CAMERRX_CTRL_CSI0_CAMMODE_SHIFT			11
> +#define CM_CAMERRX_CTRL_CSI0_CAMMODE_MASK			0x3
> +#define CM_CAMERRX_CTRL_CSI0_LANEENABLE_SHIFT			13
> +#define CM_CAMERRX_CTRL_CSI0_LANEENABLE_MASK			0xf
> +#define CM_CAMERRX_CTRL_CSI0_MODE_SHIFT				17
> +#define CM_CAMERRX_CTRL_CSI0_MODE_MASK				0x1
> +
> +#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ