[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <567173D7.6060303@huawei.com>
Date: Wed, 16 Dec 2015 09:23:19 -0500
From: majun <majun258@...wei.com>
To: Mark Rutland <mark.rutland@....com>
CC: <Catalin.Marinas@....com>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <Will.Deacon@....com>,
<marc.zyngier@....com>, <jason@...edaemon.net>,
<tglx@...utronix.de>, <lizefan@...wei.com>, <huxinwei@...wei.com>,
<dingtianhong@...wei.com>, <zhaojunhua@...ilicon.com>,
<liguozhu@...ilicon.com>, <xuwei5@...ilicon.com>,
<wei.chenwei@...ilicon.com>, <guohanjun@...wei.com>,
<wuyun.wu@...wei.com>, <guodong.xu@...aro.org>,
<haojian.zhuang@...aro.org>, <zhangfei.gao@...aro.org>,
<usman.ahmad@...aro.org>, <klimov.linux@...il.com>,
<gabriele.paoloni@...wei.com>
Subject: Re: [PATCH v9 1/4] dt-binding:Documents of the mbigen bindings
Hi Mark:
On 2015/12/11 10:26, Mark Rutland wrote:
> Hi,
>
> On Mon, Nov 23, 2015 at 11:15:10AM +0800, MaJun wrote:
>> From: Ma Jun <majun258@...wei.com>
>>
>> Add the mbigen msi interrupt controller bindings document.
>>
>> This patch based on Mark Rutland's patch
>> https://lkml.org/lkml/2015/7/23/558
>>
>> Signed-off-by: Ma Jun <majun258@...wei.com>
>> ---
>> Documentation/devicetree/bindings/arm/mbigen.txt | 69 ++++++++++++++++++++++
>> 1 files changed, 69 insertions(+), 0 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/arm/mbigen.txt
>>
>> diff --git a/Documentation/devicetree/bindings/arm/mbigen.txt b/Documentation/devicetree/bindings/arm/mbigen.txt
>> new file mode 100644
>> index 0000000..8ae59a9
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/mbigen.txt
>> @@ -0,0 +1,69 @@
>> +Hisilicon mbigen device tree bindings.
>> +=======================================
>> +
[...]
>> +- #interrupt-cells : Specifies the number of cells needed to encode an
>> + interrupt source. The value must be 2.
>> +
>> + The 1st cell is global hardware pin number of the interrupt.
>> + This value depends on the Soc design.
>
> I think a little more information is required here. Presumably the
> "global hardware pin number" is actually a pin number within the
> particular mbigen instance? i.e. it is local to this instance?
>
Maybe "global hardware pin number" is not an accurate definition of pin number and
makes people confused.
I will change it to "hardware pin number" to present the real pin number of
wired interrupt(from 0 to maximum interrupt number).
So, there is no global pin number or local pin number.
Thanks!
Majun
>> + The 2nd cell is the interrupt trigger type.
>> + The value of this cell should be:
>> + 1: rising edge triggered
>> + or
>> + 4: high level triggered
>> +
>> +Examples:
>> +
>> + mbigen_device_gmac:intc {
>> + compatible = "hisilicon,mbigen-v2";
>> + reg = <0x0 0xc0080000 0x0 0x10000>;
>> + interrupt-controller;
>> + msi-parent = <&its_dsa 0x40b1c>;
>> + num-msis = <9>;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> +Devices connect to mbigen required properties:
>> +----------------------------------------------------
>> +-interrupt-parent: Specifies the mbigen device node which device connected.
>> +-interrupts:specifies the interrupt source.
>> + The 1st cell is global hardware pin number of the interrupt.
>> + This value depends on the Soc design.
>> + The 2nd cell is the interrupt trigger type(rising edge triggered or high
>> + level triggered)
>
> You should be able to refer to the usual interrupt bindings given you
> defined the format previously when describing #interrupt-cells.
>
> Thanks,
> Mark.
>
> .
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists