| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <567198AA.2030503@hurleysoftware.com>
Date: Wed, 16 Dec 2015 09:00:26 -0800
From: Peter Hurley <peter@...leysoftware.com>
To: Anton Wuerfel <anton.wuerfel@....de>
Cc: linux-serial@...r.kernel.org,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jslaby@...e.com>,
"James E.J. Bottomley" <jejb@...isc-linux.org>,
Helge Deller <deller@....de>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Qipeng Zha <qipeng.zha@...el.com>,
Desmond Liu <desmondl@...adcom.com>,
Wang Long <long.wanglong@...wei.com>,
Matt Redfearn <matt.redfearn@...tec.com>,
Paul Burton <paul.burton@...tec.com>,
Ralf Baechle <ralf@...ux-mips.org>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>,
Peter Hung <hpeter@...il.com>,
Soeren Grunewald <soeren.grunewald@...y.de>,
Adam Lee <adam.lee@...onical.com>,
"Maciej S. Szmigiero" <mail@...iej.szmigiero.name>,
Mans Rullgard <mans@...sr.com>, linux-kernel@...r.kernel.org,
linux-parisc@...r.kernel.org, linux-kernel@...cs.fau.de,
Phillip Raffeck <phillip.raffeck@....de>
Subject: Re: [PATCH 10/11] tty: serial: 8250: Replace printk by pr_*
Hi Anton,
On 12/16/2015 07:36 AM, Anton Wuerfel wrote:
> This patch replaces printk by the corresponding variant of pr_* in order to
> fix checkpatch warnings.
Comments below.
> Signed-off-by: Anton Würfel <anton.wuerfel@....de>
> Signed-off-by: Phillip Raffeck <phillip.raffeck@....de>
> CC: linux-kernel@...cs.fau.de
> ---
> drivers/tty/serial/8250/8250_core.c | 5 ++---
> drivers/tty/serial/8250/8250_gsc.c | 6 ++----
> drivers/tty/serial/8250/8250_hp300.c | 14 +++++++-------
> drivers/tty/serial/8250/8250_pnp.c | 6 +++---
> drivers/tty/serial/8250/8250_port.c | 3 +--
> 5 files changed, 15 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
> index 2b3731f..b5e0c48 100644
> --- a/drivers/tty/serial/8250/8250_core.c
> +++ b/drivers/tty/serial/8250/8250_core.c
> @@ -1095,9 +1095,8 @@ static int __init serial8250_init(void)
>
> serial8250_isa_init_ports();
>
> - printk(KERN_INFO "Serial: 8250/16550 driver, "
> - "%d ports, IRQ sharing %sabled\n", nr_uarts,
> - share_irqs ? "en" : "dis");
> + pr_info("Serial: 8250/16550 driver, %d ports, IRQ sharing %sabled\n",
> + nr_uarts, share_irqs ? "en" : "dis");
>
> #ifdef CONFIG_SPARC
> ret = sunserial_register_minors(&serial8250_reg, UART_NR);
> diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c
> index 2e3ea1a..a9b63d0 100644
> --- a/drivers/tty/serial/8250/8250_gsc.c
> +++ b/drivers/tty/serial/8250/8250_gsc.c
> @@ -42,8 +42,7 @@ static int __init serial_init_chip(struct parisc_device *dev)
> * the user what they're missing.
> */
> if (parisc_parent(dev)->id.hw_type != HPHW_IOA)
> - printk(KERN_INFO
> - "Serial: device 0x%llx not configured.\n"
> + pr_info("Serial: device 0x%llx not configured.\n"
> "Enable support for Wax, Lasi, Asp or Dino.\n",
> (unsigned long long)dev->hpa.start);
> return -ENODEV;
> @@ -66,8 +65,7 @@ static int __init serial_init_chip(struct parisc_device *dev)
>
> err = serial8250_register_8250_port(&uart);
> if (err < 0) {
> - printk(KERN_WARNING
> - "serial8250_register_8250_port returned error %d\n", err);
> + pr_warn("serial8250_register_8250_port returned error %d\n", err);
> iounmap(uart.port.membase);
> return err;
> }
> diff --git a/drivers/tty/serial/8250/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c
> index 52c43da..85b574896 100644
> --- a/drivers/tty/serial/8250/8250_hp300.c
> +++ b/drivers/tty/serial/8250/8250_hp300.c
> @@ -110,7 +110,7 @@ int __init hp300_setup_serial_console(void)
> /* Check for APCI console */
> if (scode == 256) {
> #ifdef CONFIG_HPAPCI
> - printk(KERN_INFO "Serial console is HP APCI 1\n");
> + pr_info("Serial console is HP APCI 1\n");
>
> port.uartclk = HPAPCI_BAUD_BASE * 16;
> port.mapbase = (FRODO_BASE + FRODO_APCI_OFFSET(1));
> @@ -118,7 +118,7 @@ int __init hp300_setup_serial_console(void)
> port.regshift = 2;
> add_preferred_console("ttyS", port.line, "9600n8");
> #else
> - printk(KERN_WARNING "Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n");
> + pr_warn("Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n");
> return 0;
> #endif
> } else {
> @@ -128,7 +128,7 @@ int __init hp300_setup_serial_console(void)
> if (!pa)
> return 0;
>
> - printk(KERN_INFO "Serial console is HP DCA at select code %d\n", scode);
> + pr_info("Serial console is HP DCA at select code %d\n", scode);
>
> port.uartclk = HPDCA_BAUD_BASE * 16;
> port.mapbase = (pa + UART_OFFSET);
> @@ -142,13 +142,13 @@ int __init hp300_setup_serial_console(void)
> if (DIO_ID(pa + DIO_VIRADDRBASE) & 0x80)
> add_preferred_console("ttyS", port.line, "9600n8");
> #else
> - printk(KERN_WARNING "Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n");
> + pr_warn("Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n");
> return 0;
> #endif
> }
>
> if (early_serial_setup(&port) < 0)
> - printk(KERN_WARNING "hp300_setup_serial_console(): early_serial_setup() failed.\n");
> + pr_warn("hp300_setup_serial_console(): early_serial_setup() failed.\n");
> return 0;
> }
> #endif /* CONFIG_SERIAL_8250_CONSOLE */
> @@ -180,7 +180,7 @@ static int hpdca_init_one(struct dio_dev *d,
> line = serial8250_register_8250_port(&uart);
>
> if (line < 0) {
> - printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d"
> + pr_notice("8250_hp300: register_serial() DCA scode %d"
> " irq %d failed\n", d->scode, uart.port.irq);
> return -ENOMEM;
> }
> @@ -261,7 +261,7 @@ static int __init hp300_8250_init(void)
> line = serial8250_register_8250_port(&uart);
>
> if (line < 0) {
> - printk(KERN_NOTICE "8250_hp300: register_serial() APCI"
> + pr_notice("8250_hp300: register_serial() APCI"
> " %d irq %d failed\n", i, uart.port.irq);
Missed these multi-line strings in your previous patch
"tty: serial: 8250: Fix multi-line strings"
> kfree(port);
> continue;
> diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
> index 2731031..3811c67 100644
> --- a/drivers/tty/serial/8250/8250_pnp.c
> +++ b/drivers/tty/serial/8250/8250_pnp.c
> @@ -465,9 +465,9 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
> return -ENODEV;
>
> #ifdef SERIAL_DEBUG_PNP
> - printk(KERN_DEBUG
> - "Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n",
> - uart.port.iobase, uart.port.mapbase, uart.port.irq, uart.port.iotype);
> + pr_debug("Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n",
> + uart.port.iobase, uart.port.mapbase,
> + uart.port.irq, uart.port.iotype);
Note that printk(KERN_DEBUG) and pr_debug() have different behavior;
you should note what the behavioral difference is in the changelog.
> #endif
> if (flags & CIR_PORT) {
> uart.port.flags |= UPF_FIXED_PORT | UPF_FIXED_TYPE;
> diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
> index 0ec823e..1b2aaf9 100644
> --- a/drivers/tty/serial/8250/8250_port.c
> +++ b/drivers/tty/serial/8250/8250_port.c
> @@ -1222,8 +1222,7 @@ static void autoconfig(struct uart_8250_port *up)
> out_lock:
> spin_unlock_irqrestore(&port->lock, flags);
> if (up->capabilities != old_capabilities) {
> - printk(KERN_WARNING
> - "ttyS%d: detected caps %08x should be %08x\n",
> + pr_warn("ttyS%d: detected caps %08x should be %08x\n",
> serial_index(port), old_capabilities,
> up->capabilities);
> }
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists