Message-ID: <CACVXFVMXjSFkj0Wb2qDFqDjWUA1fY41MZdN6SDKVH=H8grLZdg@mail.gmail.com>
Date:	Thu, 17 Dec 2015 11:52:51 +0800
From:	Ming Lei <ming.lei@...onical.com>
To:	Andre Przywara <andre.przywara@....com>
Cc:	Jens Axboe <axboe@...nel.dk>, linux-block@...r.kernel.org,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	Rob Herring <rob.herring@...aro.org>,
	Eric Auger <eric.auger@...aro.org>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>
Subject: Re: block layer bug with 4.4-rc3+

On Wed, Dec 16, 2015 at 10:55 PM, Andre Przywara <andre.przywara@....com> wrote:
> Hi,
>
> On 15/12/15 13:39, Ming Lei wrote:
>> On Tue, Dec 15, 2015 at 8:23 PM, Andre Przywara <andre.przywara@....com> wrote:
>>> Hi Ming,
>>>
>>> thanks for the answer!
>>>
>>> On 15/12/15 11:54, Ming Lei wrote:
>>>> On Tue, Dec 15, 2015 at 7:05 PM, Andre Przywara <andre.przywara@....com> wrote:
>>>>> Hi,
>>>>>
>>>>> I've been experiencing issues with at least 4.4-rc3 (including current
>>>>
>>>> I'd suggest you to test the latest linus tree first, and at least two
>>>> fix patches
>>>> have been merged for blk-merge issue.  If there is still the issue
>>>> with linus tree,
>>>> I am happy to take a look.
>>>
>>> Mmh, as said ("including current HEAD") this happens still with the
>>> latest HEAD from Linus (which is "9f9499ae8e64: Linux 4.4-rc5" for me).
>>> Just tested yesterday.
>>> Is there another branch/tree with block fixes I should test? Is it worth
>>> to try any of the upcoming branches in linux-block.git (for-4.5/core,
>>> maybe?)
>>
>> Both the fixes have been in linus tree already, and reverting the commit
>> basically makes merge not possible, so there must be issues somewhere.
>>
>> And can you see the issue on other 32bit ARM platform?  I don't see the
>> issue on x86 and arm64, and the commit itself is correct, IMO.
>
> Quick tests on a Cubietruck didn't show the issue, but this board is
> nowhere near the Midway (2 in-order cores with 2GB RAM vs. 4
> out-of-order cores with 8 GB RAM), so the load isn't the same.
> I could rule out .config issues by using multi_v7_defconfig - with LPAE
> enabled on top, that is.
> Using the plain multi_v7_defconfig (which doesn't have LPAE and makes me
> loose half of the RAM on that box) didn't show the bug so far.
> One of the effects of turning on LPAE is that dma_addr_t and phys_addr_t
> turn to 64-bit, with long, int and void* still being 32-bit. Can you
> think of any issues that could be related to that?
>
> Also can you briefly sketch what that patch (578270bfbd) eventually
> changes? I see that the fix looks right, I am just wondering what the
> impact is: Do we get more blocks or less or bigger ones or smaller?

Without the change, 'bvprvp' always points to 'bv', then each bio vector
can't be merged to other bio vector, so each bvec becomes one single
physical segment(convert to one single sg element in driver), finally the
transfer size for each bio becomes much smaller, and size of each
segment becomes much smaller, but segment number may become
bigger.

>
> I will try to do more experiments and to find the real culprit.

It may be helpful to enable 'block:*' trace events, and get/analyze the
traces close to the kernel warning.

>
> Thanks,
> Andre.
>
>>
>>>
>>> Thanks,
>>> Andre.
>>>
>>>> Thanks,
>>>>
>>>>> HEAD) on a Calxeda Midway (4*ARM Cortex-A15 (32-bit), 8GB RAM, SATA
>>>>> spinning disk or SSD).
>>>>> After some disk I/O load (kernel compile with -j6) I see the kernel
>>>>> screaming:
>>>>>
>>>>> [  103.736982] ata1.00: exception Emask 0x0 SAct 0x3ffff0 SErr 0x0
>>>>> action 0x6 frozen
>>>>> [  103.744476] ata1.00: failed command: WRITE FPDMA QUEUED
>>>>> [  103.749707] ata1.00: cmd 61/00:20:48:6b:41/08:00:0a:00:00/40 tag 4
>>>>> ncq 1048576 out
>>>>> [  103.749707]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
>>>>> 0x4 (timeout)
>>>>> [  103.764659] ata1.00: status: { DRDY }
>>>>> [  103.768321] ata1.00: failed command: WRITE FPDMA QUEUED
>>>>> [  103.773547] ata1.00: cmd 61/98:28:48:73:41/42:00:0a:00:00/40 tag 5
>>>>> ncq 8728576 out
>>>>> [  103.773547]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
>>>>> 0x4 (timeout)
>>>>> < repeated with increasing tag numbers>
>>>>>
>>>>> This repeats for a while, but then seems to recover later, though I
>>>>> haven't checked if there are more issues and rebooted instead to avoid
>>>>> filesystem damage.
>>>>>
>>>>> While I agree that this looks like a disk error on the first glance, I
>>>>> never saw this before 4.4-rc2, had the very same error on different
>>>>> nodes (with another spinning disk and even an SSD) and I can make it
>>>>> vanish by reverting the commit I identified after bisection:
>>>>>
>>>>> commit 578270bfbd2803dc7b0b03fbc2ac119efbc73195
>>>>> Author: Ming Lei <ming.lei@...onical.com>
>>>>> Date:   Tue Nov 24 10:35:29 2015 +0800
>>>>>
>>>>>     block: fix segment split
>>>>> ...
>>>>> I understand that this fix seems sane, but actually reverting it fixes
>>>>> the issue for me: 4.4-rc5 crashed within some minutes with the above
>>>>> log, 4.4-rc5 with 578270bfbd reverted survived 19 hours of continuous
>>>>> kernel compiles without issues.
>>>>> Looking at the git history of that file I see quite some recent changes
>>>>> there, but it's beyond my understanding of the code to spot the real
>>>>> culprit.
>>>>>
>>>>> Can anyone point me to a change in blk-merge.c I could try to revert to
>>>>> identify the real root cause? I can run tests quickly, though a real
>>>>> positive case would need some hours of runtime to be sure it's fine.
>>>>>
>>>>> Many thanks!
>>>>> Cheers,
>>>>> Andre.
>>>>> --
> --
> To unsubscribe from this list: send the line "unsubscribe linux-block" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists