[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1452864223-423-1-git-send-email-andy.yan@rock-chips.com>
Date: Fri, 15 Jan 2016 21:23:43 +0800
From: Andy Yan <andy.yan@...k-chips.com>
To: heiko@...ech.de, naobsd@...il.com
Cc: robh+dt@...nel.org, linux@....linux.org.uk,
devicetree@...r.kernel.org, galak@...eaurora.org,
linux-kernel@...r.kernel.org, ijc+devicetree@...lion.org.uk,
linux-rockchip@...ts.infradead.org, pawel.moll@....com,
mark.rutland@....com, inux-arm-kernel@...ts.infradead.org,
Andy Yan <andy.yan@...k-chips.com>
Subject: [PATCH v2 0/2] fix rk3066a based boards hang when cpufreq changes
I found the rayeager board always hang in the system boot
process or when cpufreq change. When check the BSP code[0]
from ChipSpark, I found the current vdd_arm voltage is too
low and so is the vdd_logic voltage, which should be modulated
by PWM3.
So I increase the vdd_arm voltage and enabled pwm3 as a pwm
regulator here.
[0] https://github.com/RockchipOpensourceCommunity/px2-android-kernel-3.0/blob/master/arch/arm/mach-rkpx2/board-rkpx2-sdk.c
Changes in v2:
- move the opp table to rk3066a.dtsi, make it as the default opp table
for rk3066a based board.
- also enable the pwm regulator for bqcurie2 and Marsboard
Andy Yan (2):
ARM: dts: rockchip: increase vdd_arm voltage for rk3066a based boards
ARM: dts: rockchip: enable pwm3 as pwm regulator for rk3066a based
boards
arch/arm/boot/dts/rk3066a-bqcurie2.dts | 16 ++++++++++++++++
arch/arm/boot/dts/rk3066a-marsboard.dts | 16 ++++++++++++++++
arch/arm/boot/dts/rk3066a-rayeager.dts | 16 ++++++++++++++++
arch/arm/boot/dts/rk3066a.dtsi | 12 +++++++-----
4 files changed, 55 insertions(+), 5 deletions(-)
--
1.9.1
Powered by blists - more mailing lists