[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1804889.MQWMfNjko2@phil>
Date: Fri, 15 Jan 2016 15:26:24 +0100
From: Heiko Stuebner <heiko@...ech.de>
To: Javier Martinez Canillas <javier@...hile0.org>
Cc: Matthias Brugger <matthias.bgg@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Thierry Reding <treding@...dia.com>,
Alexandru Stan <amstan@...omium.org>,
Arnd Bergmann <arnd@...db.de>,
Brian Norris <briannorris@...omium.org>,
Douglas Anderson <dianders@...omium.org>, naobsd@...il.com,
Linux Kernel <linux-kernel@...r.kernel.org>,
linux-rockchip@...ts.infradead.org,
Sjoerd Simons <sjoerd.simons@...labora.co.uk>,
mbrugger@...e.com, Dmitry Torokhov <dmitry.torokhov@...il.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>, p.zabel@...gutronix.de,
Olof Johansson <olof@...om.net>, andy.yan@...k-chips.com,
romain.perier@...il.com, jic23@...nel.org
Subject: Re: [PATCH 2/2] arm64: dts: rockchip: Add basic support for orion-r68
Am Freitag, 15. Januar 2016, 11:22:52 schrieb Javier Martinez Canillas:
> Hello Heiko,
>
> On Fri, Jan 15, 2016 at 11:03 AM, Heiko Stuebner <heiko@...ech.de> wrote:
> > Hi Javier,
> >
> > Am Freitag, 15. Januar 2016, 10:28:44 schrieb Javier Martinez Canillas:
> >> This is not a complete review but I just wanted to comment on two
> >
> >> things that I noticed:
> > same for me for now :-)
> >
> >> On Fri, Jan 15, 2016 at 10:06 AM, Matthias Brugger
> >> <matthias.bgg@...il.com> wrote:
> >>
> >> [snip]
> >>
> >> > + };
> >> > +
> >> > + vcc_18: vcc18-regulator {
> >> > + compatible = "regulator-fixed";
> >> > + regulator-name = "vcc_18";
> >> > + regulator-min-microvolt = <1800000>;
> >> > + regulator-max-microvolt = <1800000>;
> >> > + regulator-always-on;
> >> > + regulator-boot-on;
> >> > + vin-supply = <&vcc_sys>;
> >> > + };
> >> > +
> >> > + /* supplies both host and otg */
> >> > + vcc_host: vcc-host-regulator {
> >> > + compatible = "regulator-fixed";
> >> > + gpio = <&gpio0 4 GPIO_ACTIVE_LOW>;
> >> > + pinctrl-names = "default";
> >> > + pinctrl-0 = <&host_vbus_drv>;
> >> > + regulator-name = "vcc_host";
> >> > + regulator-always-on;
> >> > + regulator-boot-on;
> >> > + vin-supply = <&vcc_sys>;
> >> > + };
> >> > +
> >> > + vccio_sd: vcc-io-sd-regulator {
> >> > + regulator-name= "vccio_sd";
> >> > + gpio = <&gpio0 9 GPIO_ACTIVE_LOW>;
> >> > + regulator-min-microvolt = <3300000>;
> >> > + regulator-max-microvolt = <3300000>;
that seems to be missing essential regulator properties
like a compatible.
> >> > + };
> >> > +
> >> > + vcc_sd: vcc-sd-regulator {
> >> > + compatible = "regulator-fixed";
> >> > + regulator-name = "vcc_sd";
> >> > + gpio = <&gpio3 11 GPIO_ACTIVE_LOW>;
> >> > + regulator-min-microvolt = <3300000>;
> >> > + regulator-max-microvolt = <3300000>;
> >> > + regulator-always-on;
> >> > + regulator-boot-on;
> >> > + vin-supply = <&vcc_io>;
> >> > + };
> >> > +
> >> > + vcc_io: vcc-io-regulator {
> >> > + compatible = "regulator-fixed";
> >> > + regulator-name = "vcc_io";
> >> > + regulator-min-microvolt = <3300000>;
> >> > + regulator-max-microvolt = <3300000>;
> >> > + regulator-always-on;
> >> > + regulator-boot-on;
> >> > + vin-supply = <&vcc_sys>;
> >> > + };
> >> > +
> >> > + vcc_lan: vcc-lan-regulator {
> >> > + compatible = "regulator-fixed";
> >> > + regulator-name = "vcc_lan";
> >> > + regulator-min-microvolt = <3300000>;
> >> > + regulator-max-microvolt = <3300000>;
> >> > + regulator-always-on;
> >> > + regulator-boot-on;
> >> > + vin-supply = <&vcc_io>;
> >> > + };
> >> > +
> >> > + vcc_sys: vcc-sys-regulator {
> >> > + compatible = "regulator-fixed";
> >> > + regulator-name = "vcc_sys";
> >> > + regulator-min-microvolt = <5000000>;
> >> > + regulator-max-microvolt = <5000000>;
> >> > + regulator-always-on;
> >> > + regulator-boot-on;
> >> > + };
> >> > +
> >> > + vccio_wl: vccio-wl-regulator {
> >> > + compatible = "regulator-fixed";
> >> > + regulator-name = "vccio_wl";
> >> > + regulator-min-microvolt = <3300000>;
> >> > + regulator-max-microvolt = <3300000>;
> >> > + regulator-always-on;
> >> > + regulator-boot-on;
> >> > + vin-supply = <&vcc_io>;
> >> > + };
> >> > +
> >> > + vdd_10: vdd-10-regulator {
> >> > + compatible = "regulator-fixed";
> >> > + regulator-name = "vdd_10";
> >> > + regulator-min-microvolt = <1000000>;
> >> > + regulator-max-microvolt = <1000000>;
> >> > + regulator-always-on;
> >> > + regulator-boot-on;
> >> > + vin-supply = <&vcc_sys>;
> >> > + };
> >> > +};
> >>
> >> There is only one regulator that is not marked as always-on. This will
> >> prevent the regulator subsystem to disable unused regulators. Do you
> >> really need all of them to be always-on?
> >
> > I do believe the regulators should be more or less correct. Sadly there
> > are no real schematics for that specific device available, but the
> > reference design for rk3368-based tv-boxes uses a hirarchy of
> > hard-wired individual regulators without any ability to control for
> > most of them [aka always on].
> >
> > And due to the r68 not sporting any different real pmic, I'd believe the
> > Orion will most likely also follow that scheme.
>
> I see, thanks a lot for the clarification. But then in that case I
> wonder what's the point of defining the gpio property in the fixed
> regulator device nodes?
the ones with gpio properties actually can be turned off - here they are the
different supplies for usb and sd-card only, so leaf-regulators without
further children.
Heiko
Powered by blists - more mailing lists