| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 18 Jan 2016 15:39:01 +0200
From: Andy Shevchenko <andy.shevchenko@...il.com>
To: Sudip Mukherjee <sudipm.mukherjee@...il.com>
Cc: Linus Walleij <linus.walleij@...aro.org>,
Alexandre Courbot <gnurou@...il.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jslaby@...e.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-gpio@...r.kernel.org" <linux-gpio@...r.kernel.org>,
"linux-serial@...r.kernel.org" <linux-serial@...r.kernel.org>,
One Thousand Gnomes <gnomes@...rguk.ukuu.org.uk>,
Rob Groner <rgroner@....com>
Subject: Re: [PATCH v4] serial: 8250: add gpio support to exar
On Mon, Jan 18, 2016 at 2:10 PM, Sudip Mukherjee
<sudipm.mukherjee@...il.com> wrote:
> Exar XR17V352/354/358 chips have 16 multi-purpose inputs/outputs which
> can be controlled using gpio interface.
> Add support to use these pins.
Looks better, but…
> drivers/gpio/Kconfig | 7 ++
> drivers/gpio/Makefile | 1 +
Why is it here?
> drivers/tty/serial/8250/8250_gpio.c | 243 ++++++++++++++++++++++++++++++++++++
> drivers/tty/serial/8250/8250_pci.c | 41 +++++-
> 4 files changed, 291 insertions(+), 1 deletion(-)
> create mode 100644 drivers/tty/serial/8250/8250_gpio.c
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index b18bea0..1294d8d 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -983,6 +983,13 @@ config GPIO_SODAVILLE
> help
> Say Y here to support Intel Sodaville GPIO.
>
> +config GPIO_EXAR
> + tristate "Support for GPIO pins on XR17V352/354/358"
> + depends on SERIAL_8250_PCI
> + help
> + Selecting this option will enable handling of GPIO pins present
> + on Exar XR17V352/354/358 chips.
> +
> endmenu
>
> menu "SPI GPIO expanders"
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index 986dbd8..68efdb5 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -37,6 +37,7 @@ obj-$(CONFIG_GPIO_DWAPB) += gpio-dwapb.o
> obj-$(CONFIG_GPIO_EM) += gpio-em.o
> obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
> obj-$(CONFIG_GPIO_ETRAXFS) += gpio-etraxfs.o
> +obj-$(CONFIG_GPIO_EXAR) += gpio-exar.o
And this file is exactly where?
> obj-$(CONFIG_GPIO_F7188X) += gpio-f7188x.o
> obj-$(CONFIG_GPIO_GE_FPGA) += gpio-ge.o
> obj-$(CONFIG_GPIO_GRGPIO) += gpio-grgpio.o
> diff --git a/drivers/tty/serial/8250/8250_gpio.c b/drivers/tty/serial/8250/8250_gpio.c
> new file mode 100644
> index 0000000..44511de
> --- /dev/null
> +++ b/drivers/tty/serial/8250/8250_gpio.c
Name is too generic for the more specific case.
> @@ -0,0 +1,243 @@
> +/*
> + * GPIO driver for Exar XR17V35X chip
> + *
> + * Copyright (C) 2015 Sudip Mukherjee <sudipm.mukherjee@...il.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/device.h>
> +#include <linux/pci.h>
> +#include <linux/gpio.h>
> +#include "8250.h"
> +
> +#define EXAR_OFFSET_MPIOLVL_LO 0x90
> +#define EXAR_OFFSET_MPIOSEL_LO 0x93
> +#define EXAR_OFFSET_MPIOLVL_HI 0x96
> +#define EXAR_OFFSET_MPIOSEL_HI 0x99
> +
> +static LIST_HEAD(exar_list);
> +static DEFINE_MUTEX(exar_mtx); /* lock while manipulating the list */
> +
> +struct exar_gpio_chip {
> + struct gpio_chip gpio_chip;
> + struct mutex lock;
> + struct uart_8250_port *port;
> + struct list_head list;
> + int index;
> + void __iomem *regs;
> + char name[16];
> +};
> +
> +#define to_exar_chip(n) container_of(n, struct exar_gpio_chip, gpio_chip)
> +
> +static inline unsigned int read_exar_reg(struct exar_gpio_chip *chip,
> + int offset)
> +{
> + dev_dbg(chip->gpio_chip.dev, "%s regs=%p offset=%x\n", __func__,
> + chip->regs, offset);
> + return readb(chip->regs + offset);
> +}
> +
> +static inline void write_exar_reg(struct exar_gpio_chip *chip, int offset,
> + int value)
> +{
> + dev_dbg(chip->gpio_chip.dev,
> + "%s regs=%p value=%x offset=%x\n", __func__, chip->regs,
> + value, offset);
> + writeb(value, chip->regs + offset);
> +}
> +
> +void xr17v35x_gpio_exit(struct uart_8250_port *port)
> +{
> + struct exar_gpio_chip *exar_gpio, *exar_pos_e, *exar_temp_e;
> +
> + if (!port || !port->port.private_data)
> + return;
> +
> + exar_gpio = port->port.private_data;
> + mutex_lock(&exar_mtx);
> + list_for_each_entry_safe(exar_pos_e, exar_temp_e, &exar_list, list) {
> + if (exar_pos_e->index == exar_gpio->index) {
> + list_del(&exar_pos_e->list);
> + break;
> + }
> + }
> + mutex_unlock(&exar_mtx);
> +
> + gpiochip_remove(&exar_gpio->gpio_chip);
> + mutex_destroy(&exar_gpio->lock);
> + iounmap(exar_gpio->regs);
> +}
> +EXPORT_SYMBOL(xr17v35x_gpio_exit);
> +
> +static void exar_set(struct gpio_chip *chip, unsigned int reg,
> + unsigned int offset, int val)
> +{
> + struct exar_gpio_chip *exar_gpio = to_exar_chip(chip);
> + int temp;
> +
> + mutex_lock(&exar_gpio->lock);
> + temp = read_exar_reg(exar_gpio, reg);
> + temp &= ~(1 << offset);
> + temp |= val << offset;
> + write_exar_reg(exar_gpio, reg, temp);
> + mutex_unlock(&exar_gpio->lock);
> +}
> +
> +static int exar_direction_output(struct gpio_chip *chip, unsigned int offset,
> + int value)
> +{
> + if (offset < 8)
> + exar_set(chip, EXAR_OFFSET_MPIOSEL_LO, 0, offset);
> + else
> + exar_set(chip, EXAR_OFFSET_MPIOSEL_HI, 0, offset - 8);
> + return 0;
> +}
> +
> +static int exar_direction_input(struct gpio_chip *chip, unsigned int offset)
> +{
> + if (offset < 8)
> + exar_set(chip, EXAR_OFFSET_MPIOSEL_LO, 1, offset);
> + else
> + exar_set(chip, EXAR_OFFSET_MPIOSEL_HI, 1, offset - 8);
> + return 0;
> +}
> +
> +static int exar_get(struct gpio_chip *chip, unsigned int reg)
> +{
> + struct exar_gpio_chip *exar_gpio = to_exar_chip(chip);
> + int value;
> +
> + if (!exar_gpio)
> + return -ENODEV;
> +
> + mutex_lock(&exar_gpio->lock);
> + value = read_exar_reg(exar_gpio, reg);
> + mutex_unlock(&exar_gpio->lock);
> +
> + return value;
> +}
> +
> +static int exar_get_direction(struct gpio_chip *chip, unsigned int offset)
> +{
> + int value;
> +
> + if (offset < 8) {
> + value = exar_get(chip, EXAR_OFFSET_MPIOSEL_LO);
> + } else {
> + value = exar_get(chip, EXAR_OFFSET_MPIOSEL_HI);
> + offset -= 8;
> + }
> +
> + if (value > 0) {
> + value >>= offset;
> + value &= 0x01;
> + }
> +
> + return value;
> +}
> +
> +static int exar_get_value(struct gpio_chip *chip, unsigned int offset)
> +{
> + int value;
> +
> + if (offset < 8) {
> + value = exar_get(chip, EXAR_OFFSET_MPIOLVL_LO);
> + } else {
> + value = exar_get(chip, EXAR_OFFSET_MPIOLVL_HI);
> + offset -= 8;
> + }
> +
> + if (value > 0) {
> + value >>= offset;
> + value &= 0x01;
> + }
> +
> + return value;
> +}
> +
> +static void exar_set_value(struct gpio_chip *chip, unsigned int offset,
> + int value)
> +{
> + if (offset < 8)
> + exar_set(chip, EXAR_OFFSET_MPIOLVL_LO, value, offset);
> + else
> + exar_set(chip, EXAR_OFFSET_MPIOLVL_HI, value, offset - 8);
> +}
> +
> +int xr17v35x_gpio_init(struct pci_dev *dev, struct uart_8250_port *port,
> + int idx)
> +{
> + struct exar_gpio_chip *exar_gpio, *exar_temp;
> + void __iomem *p;
> + int index = 1;
> + int ret;
> +
> + if (idx != 0)
> + return 0;
> +
> + if (dev->vendor != PCI_VENDOR_ID_EXAR)
> + return 0;
> +
> + exar_gpio = devm_kzalloc(&dev->dev, sizeof(*exar_gpio), GFP_KERNEL);
> + if (!exar_gpio)
> + return -ENOMEM;
> +
> + p = pci_ioremap_bar(dev, 0);
> + if (!p)
> + return -ENOMEM;
> +
> + mutex_init(&exar_gpio->lock);
> + INIT_LIST_HEAD(&exar_gpio->list);
> +
> + mutex_lock(&exar_mtx);
> + /* find the first unused index */
> + list_for_each_entry(exar_temp, &exar_list, list) {
> + if (exar_temp->index == index)
> + index++;
> + }
> +
> + sprintf(exar_gpio->name, "exar_gpio%d", index);
> + exar_gpio->gpio_chip.label = exar_gpio->name;
> + exar_gpio->gpio_chip.dev = &dev->dev;
> + exar_gpio->gpio_chip.direction_output = exar_direction_output;
> + exar_gpio->gpio_chip.direction_input = exar_direction_input;
> + exar_gpio->gpio_chip.get_direction = exar_get_direction;
> + exar_gpio->gpio_chip.get = exar_get_value;
> + exar_gpio->gpio_chip.set = exar_set_value;
> + exar_gpio->gpio_chip.base = -1;
> + exar_gpio->gpio_chip.ngpio = 16;
> + exar_gpio->gpio_chip.owner = THIS_MODULE;
Is it still needed?
> + exar_gpio->regs = p;
> + exar_gpio->index = index;
> +
> + ret = gpiochip_add(&exar_gpio->gpio_chip);
> + if (ret)
> + goto err_destroy;
> +
> + exar_gpio->port = port;
> + port->port.private_data = exar_gpio;
> +
> + list_add_tail(&exar_gpio->list, &exar_list);
> + mutex_unlock(&exar_mtx);
> +
> + return 0;
> +
> +err_destroy:
> + mutex_unlock(&exar_mtx);
> + mutex_destroy(&exar_gpio->lock);
> + pci_iounmap(dev, p);
> + return ret;
> +}
> +EXPORT_SYMBOL(xr17v35x_gpio_init);
> +
> +MODULE_DESCRIPTION("Exar GPIO driver");
> +MODULE_AUTHOR("Sudip Mukherjee <sudipm.mukherjee@...il.com>");
> +MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRIVER_NAME);
Where DRIVER_NAME defined above as something sane.
> diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
> index 4097f3f..5c03d5c 100644
> --- a/drivers/tty/serial/8250/8250_pci.c
> +++ b/drivers/tty/serial/8250/8250_pci.c
> @@ -1764,12 +1764,25 @@ xr17v35x_has_slave(struct serial_private *priv)
> (dev_id == PCI_DEVICE_ID_EXAR_XR17V8358));
> }
>
> +static void pci_xr17v35x_exit(struct pci_dev *dev)
> +{
> + struct serial_private *priv = pci_get_drvdata(dev);
> + struct uart_8250_port *port = serial8250_get_port(priv->line[0]);
> + struct platform_device *pdev = port->port.private_data;
> +
> + if (pdev) {
> + platform_device_unregister(pdev);
> + port->port.private_data = NULL;
> + }
> +}
> +
> static int
> pci_xr17v35x_setup(struct serial_private *priv,
> const struct pciserial_board *board,
> struct uart_8250_port *port, int idx)
> {
> u8 __iomem *p;
> + int ret;
>
> p = pci_ioremap_bar(priv->dev, 0);
> if (p == NULL)
> @@ -1807,7 +1820,28 @@ pci_xr17v35x_setup(struct serial_private *priv,
> writeb(128, p + UART_EXAR_RXTRG);
> iounmap(p);
>
> - return pci_default_setup(priv, board, port, idx);
> + ret = pci_default_setup(priv, board, port, idx);
> + if (ret)
> + return ret;
> +
> + if (idx == 0) {
> + struct platform_device *device;
> +
> + device = platform_device_alloc("gpio_exar",
> + PLATFORM_DEVID_AUTO);
> + if (!device)
> + return -ENOMEM;
> +
> + if (platform_device_add(device) < 0) {
> + platform_device_put(device);
> + return -ENODEV;
> + }
> +
> + port->port.private_data = device;
> + platform_set_drvdata(device, priv->dev);
> + }
> +
> + return 0;
> }
>
> #define PCI_DEVICE_ID_COMMTECH_4222PCI335 0x0004
> @@ -2407,6 +2441,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
> .subvendor = PCI_ANY_ID,
> .subdevice = PCI_ANY_ID,
> .setup = pci_xr17v35x_setup,
> + .exit = pci_xr17v35x_exit,
> },
> {
> .vendor = PCI_VENDOR_ID_EXAR,
> @@ -2414,6 +2449,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
> .subvendor = PCI_ANY_ID,
> .subdevice = PCI_ANY_ID,
> .setup = pci_xr17v35x_setup,
> + .exit = pci_xr17v35x_exit,
> },
> {
> .vendor = PCI_VENDOR_ID_EXAR,
> @@ -2421,6 +2457,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
> .subvendor = PCI_ANY_ID,
> .subdevice = PCI_ANY_ID,
> .setup = pci_xr17v35x_setup,
> + .exit = pci_xr17v35x_exit,
> },
> {
> .vendor = PCI_VENDOR_ID_EXAR,
> @@ -2428,6 +2465,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
> .subvendor = PCI_ANY_ID,
> .subdevice = PCI_ANY_ID,
> .setup = pci_xr17v35x_setup,
> + .exit = pci_xr17v35x_exit,
> },
> {
> .vendor = PCI_VENDOR_ID_EXAR,
> @@ -2435,6 +2473,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
> .subvendor = PCI_ANY_ID,
> .subdevice = PCI_ANY_ID,
> .setup = pci_xr17v35x_setup,
> + .exit = pci_xr17v35x_exit,
> },
Okay, why not to:
1) split out exar bits of 8250_pci.c (see 8250_mid.c case);
2) add gpio code either in place or separate file with sane and more
specific name?
--
With Best Regards,
Andy Shevchenko
Powered by blists - more mailing lists