| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 20 Jan 2016 17:26:36 +0900
From: Jaehoon Chung <jh80.chung@...sung.com>
To: Shawn Lin <shawn.lin@...k-chips.com>,
Ulf Hansson <ulf.hansson@...aro.org>
Cc: linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 0/3] Convert dw_mci_pltfm_prepare_command into a library
call
Hi Shawn.
On 01/19/2016 12:39 PM, Shawn Lin wrote:
> This patchset expose dw_mci_pltfm_prepare_command towards to
> library call and remove the redundant code from dw_mmc-rockchip.
> Meanwhile we make dw_mmc-exynos to call it instead of changing cmdr
> in its variant drivers.
>
Actually, I want to remove *_prepare_command from entire dw-mmc driver.
Since exynos used USE_HOLD_REG bit in case of special condition, maybe you doesn't remove all, right?
I'm figuring out the using the generic solution.
Before that, how about this? I want to know your opinion.
diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c
index 3a7e835..ed08e4b 100644
--- a/drivers/mmc/host/dw_mmc-exynos.c
+++ b/drivers/mmc/host/dw_mmc-exynos.c
@@ -145,6 +145,16 @@ static void dw_mci_exynos_set_clksel_timing(struct dw_mci *host, u32 timing)
mci_writel(host, CLKSEL64, clksel);
else
mci_writel(host, CLKSEL, clksel);
+
+ /*
+ * Exynos4412 and Exynos5250 extends the use of CMD register with the
+ * use of bit 29 (which is reserved on standard MSHC controllers) for
+ * optionally bypassing the HOLD register for command and data. The
+ * HOLD register should be bypassed in case there is no phase shift
+ * applied on CMD/DATA that is sent to the card.
+ */
+ if (!SDMMC_CLKSEL_GET_DRV_WD3(clksel))
+ host->no_use_hold = 1;
}
#ifdef CONFIG_PM_SLEEP
@@ -202,26 +212,6 @@ static int dw_mci_exynos_resume_noirq(struct device *dev)
#define dw_mci_exynos_resume_noirq NULL
#endif /* CONFIG_PM_SLEEP */
-static void dw_mci_exynos_prepare_command(struct dw_mci *host, u32 *cmdr)
-{
- struct dw_mci_exynos_priv_data *priv = host->priv;
- /*
- * Exynos4412 and Exynos5250 extends the use of CMD register with the
- * use of bit 29 (which is reserved on standard MSHC controllers) for
- * optionally bypassing the HOLD register for command and data. The
- * HOLD register should be bypassed in case there is no phase shift
- * applied on CMD/DATA that is sent to the card.
- */
- if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
- priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) {
- if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL64)))
- *cmdr |= SDMMC_CMD_USE_HOLD_REG;
- } else {
- if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL)))
- *cmdr |= SDMMC_CMD_USE_HOLD_REG;
- }
-}
-
static void dw_mci_exynos_config_hs400(struct dw_mci *host, u32 timing)
{
struct dw_mci_exynos_priv_data *priv = host->priv;
@@ -500,7 +490,6 @@ static const struct dw_mci_drv_data exynos_drv_data = {
.caps = exynos_dwmmc_caps,
.init = dw_mci_exynos_priv_init,
.setup_clock = dw_mci_exynos_setup_clock,
- .prepare_command = dw_mci_exynos_prepare_command,
.set_ios = dw_mci_exynos_set_ios,
.parse_dt = dw_mci_exynos_parse_dt,
.execute_tuning = dw_mci_exynos_execute_tuning,
diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
index 81bdeeb..c0bb0c7 100644
--- a/drivers/mmc/host/dw_mmc-pltfm.c
+++ b/drivers/mmc/host/dw_mmc-pltfm.c
@@ -26,19 +26,6 @@
#include "dw_mmc.h"
#include "dw_mmc-pltfm.h"
-static void dw_mci_pltfm_prepare_command(struct dw_mci *host, u32 *cmdr)
-{
- *cmdr |= SDMMC_CMD_USE_HOLD_REG;
-}
-
-static const struct dw_mci_drv_data socfpga_drv_data = {
- .prepare_command = dw_mci_pltfm_prepare_command,
-};
-
-static const struct dw_mci_drv_data pistachio_drv_data = {
- .prepare_command = dw_mci_pltfm_prepare_command,
-};
-
int dw_mci_pltfm_register(struct platform_device *pdev,
const struct dw_mci_drv_data *drv_data)
{
@@ -94,10 +81,8 @@ EXPORT_SYMBOL_GPL(dw_mci_pltfm_pmops);
static const struct of_device_id dw_mci_pltfm_match[] = {
{ .compatible = "snps,dw-mshc", },
- { .compatible = "altr,socfpga-dw-mshc",
- .data = &socfpga_drv_data },
- { .compatible = "img,pistachio-dw-mshc",
- .data = &pistachio_drv_data },
+ { .compatible = "altr,socfpga-dw-mshc", },
+ { .compatible = "img,pistachio-dw-mshc", },
{},
};
MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match);
diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
index d9c92f3..84e50f3 100644
--- a/drivers/mmc/host/dw_mmc-rockchip.c
+++ b/drivers/mmc/host/dw_mmc-rockchip.c
@@ -26,11 +26,6 @@ struct dw_mci_rockchip_priv_data {
int default_sample_phase;
};
-static void dw_mci_rockchip_prepare_command(struct dw_mci *host, u32 *cmdr)
-{
- *cmdr |= SDMMC_CMD_USE_HOLD_REG;
-}
-
static int dw_mci_rk3288_setup_clock(struct dw_mci *host)
{
host->bus_hz /= RK3288_CLKGEN_DIV;
@@ -240,12 +235,10 @@ static int dw_mci_rockchip_init(struct dw_mci *host)
}
static const struct dw_mci_drv_data rk2928_drv_data = {
- .prepare_command = dw_mci_rockchip_prepare_command,
.init = dw_mci_rockchip_init,
};
static const struct dw_mci_drv_data rk3288_drv_data = {
- .prepare_command = dw_mci_rockchip_prepare_command,
.set_ios = dw_mci_rk3288_set_ios,
.execute_tuning = dw_mci_rk3288_execute_tuning,
.parse_dt = dw_mci_rk3288_parse_dt,
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index ffef24a..844f8cf 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -234,7 +234,6 @@ static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd)
struct mmc_data *data;
struct dw_mci_slot *slot = mmc_priv(mmc);
struct dw_mci *host = slot->host;
- const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
u32 cmdr;
cmd->error = -EINPROGRESS;
@@ -296,8 +295,8 @@ static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd)
cmdr |= SDMMC_CMD_DAT_WR;
}
- if (drv_data && drv_data->prepare_command)
- drv_data->prepare_command(slot->host, &cmdr);
+ if (!host->no_use_hold)
+ cmdr |= SDMMC_CMD_USE_HOLD_REG;
return cmdr;
}
diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
index a14b7fc..c0fc0e3 100644
--- a/drivers/mmc/host/dw_mmc.h
+++ b/drivers/mmc/host/dw_mmc.h
@@ -277,7 +277,6 @@ struct dw_mci_slot {
* @caps: mmc subsystem specified capabilities of the controller(s).
* @init: early implementation specific initialization.
* @setup_clock: implementation specific clock configuration.
- * @prepare_command: handle CMD register extensions.
* @set_ios: handle bus specific extensions.
* @parse_dt: parse implementation specific device tree properties.
* @execute_tuning: implementation specific tuning procedure.
@@ -290,7 +289,6 @@ struct dw_mci_drv_data {
unsigned long *caps;
int (*init)(struct dw_mci *host);
int (*setup_clock)(struct dw_mci *host);
- void (*prepare_command)(struct dw_mci *host, u32 *cmdr);
void (*set_ios)(struct dw_mci *host, struct mmc_ios *ios);
int (*parse_dt)(struct dw_mci *host);
int (*execute_tuning)(struct dw_mci_slot *slot, u32 opcode);
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index 89df7ab..7b1416a 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -221,6 +221,8 @@ struct dw_mci {
struct timer_list cmd11_timer;
struct timer_list dto_timer;
+
+ int no_use_hold;
};
/* DMA ops for Internal/External DMAC interface */
>
>
> Shawn Lin (3):
> mmc: dw_mmc: expose dw_mci_pltfm_prepare_command
> mmc: dw_mmc-rockchip: remove prepare_command hook
> mmc: dw_mmc-exynos: wrapper prepare_command
>
> drivers/mmc/host/dw_mmc-exynos.c | 4 ++--
> drivers/mmc/host/dw_mmc-pltfm.c | 3 ++-
> drivers/mmc/host/dw_mmc-pltfm.h | 2 +-
> drivers/mmc/host/dw_mmc-rockchip.c | 9 ++-------
> 4 files changed, 7 insertions(+), 11 deletions(-)
>
Powered by blists - more mailing lists