| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <569F5197.8050905@rock-chips.com>
Date: Wed, 20 Jan 2016 17:21:27 +0800
From: Shawn Lin <shawn.lin@...k-chips.com>
To: Jaehoon Chung <jh80.chung@...sung.com>,
Ulf Hansson <ulf.hansson@...aro.org>
Cc: shawn.lin@...k-chips.com, linux-mmc@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 0/3] Convert dw_mci_pltfm_prepare_command into a library
call
On 2016/1/20 16:26, Jaehoon Chung wrote:
> Hi Shawn.
>
> On 01/19/2016 12:39 PM, Shawn Lin wrote:
>> This patchset expose dw_mci_pltfm_prepare_command towards to
>> library call and remove the redundant code from dw_mmc-rockchip.
>> Meanwhile we make dw_mmc-exynos to call it instead of changing cmdr
>> in its variant drivers.
>>
>
> Actually, I want to remove *_prepare_command from entire dw-mmc driver.
> Since exynos used USE_HOLD_REG bit in case of special condition, maybe you doesn't remove all, right?
>
Hi Jaehoon,
right, the only thing I can see in prepare_command hook is using
USE_HOLD_REG bit.
Rockchip soc : all of them need USE_HOLD_REG.
pistachio platform: all of them need it refering to the code.
dw_mmc-k3 and dw_mmc-pci: never use this bit.
exynos: used in special case.
So if we remove the prepare_command from entire dw-mmc driver, maybe we
should add a new flag in struct dw_mci for all the compatible platform
to decide whether they need use it or not. It that the right way? :)
> I'm figuring out the using the generic solution.
> Before that, how about this? I want to know your opinion.
>
> diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c
> index 3a7e835..ed08e4b 100644
> --- a/drivers/mmc/host/dw_mmc-exynos.c
> +++ b/drivers/mmc/host/dw_mmc-exynos.c
> @@ -145,6 +145,16 @@ static void dw_mci_exynos_set_clksel_timing(struct dw_mci *host, u32 timing)
> mci_writel(host, CLKSEL64, clksel);
> else
> mci_writel(host, CLKSEL, clksel);
> +
> + /*
> + * Exynos4412 and Exynos5250 extends the use of CMD register with the
> + * use of bit 29 (which is reserved on standard MSHC controllers) for
> + * optionally bypassing the HOLD register for command and data. The
> + * HOLD register should be bypassed in case there is no phase shift
> + * applied on CMD/DATA that is sent to the card.
> + */
> + if (!SDMMC_CLKSEL_GET_DRV_WD3(clksel))
> + host->no_use_hold = 1;
> }
>
> #ifdef CONFIG_PM_SLEEP
> @@ -202,26 +212,6 @@ static int dw_mci_exynos_resume_noirq(struct device *dev)
> #define dw_mci_exynos_resume_noirq NULL
> #endif /* CONFIG_PM_SLEEP */
>
> -static void dw_mci_exynos_prepare_command(struct dw_mci *host, u32 *cmdr)
> -{
> - struct dw_mci_exynos_priv_data *priv = host->priv;
> - /*
> - * Exynos4412 and Exynos5250 extends the use of CMD register with the
> - * use of bit 29 (which is reserved on standard MSHC controllers) for
> - * optionally bypassing the HOLD register for command and data. The
> - * HOLD register should be bypassed in case there is no phase shift
> - * applied on CMD/DATA that is sent to the card.
> - */
> - if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
> - priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) {
> - if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL64)))
> - *cmdr |= SDMMC_CMD_USE_HOLD_REG;
> - } else {
> - if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL)))
> - *cmdr |= SDMMC_CMD_USE_HOLD_REG;
> - }
> -}
> -
> static void dw_mci_exynos_config_hs400(struct dw_mci *host, u32 timing)
> {
> struct dw_mci_exynos_priv_data *priv = host->priv;
> @@ -500,7 +490,6 @@ static const struct dw_mci_drv_data exynos_drv_data = {
> .caps = exynos_dwmmc_caps,
> .init = dw_mci_exynos_priv_init,
> .setup_clock = dw_mci_exynos_setup_clock,
> - .prepare_command = dw_mci_exynos_prepare_command,
> .set_ios = dw_mci_exynos_set_ios,
> .parse_dt = dw_mci_exynos_parse_dt,
> .execute_tuning = dw_mci_exynos_execute_tuning,
> diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
> index 81bdeeb..c0bb0c7 100644
> --- a/drivers/mmc/host/dw_mmc-pltfm.c
> +++ b/drivers/mmc/host/dw_mmc-pltfm.c
> @@ -26,19 +26,6 @@
> #include "dw_mmc.h"
> #include "dw_mmc-pltfm.h"
>
> -static void dw_mci_pltfm_prepare_command(struct dw_mci *host, u32 *cmdr)
> -{
> - *cmdr |= SDMMC_CMD_USE_HOLD_REG;
> -}
> -
> -static const struct dw_mci_drv_data socfpga_drv_data = {
> - .prepare_command = dw_mci_pltfm_prepare_command,
> -};
> -
> -static const struct dw_mci_drv_data pistachio_drv_data = {
> - .prepare_command = dw_mci_pltfm_prepare_command,
> -};
> -
> int dw_mci_pltfm_register(struct platform_device *pdev,
> const struct dw_mci_drv_data *drv_data)
> {
> @@ -94,10 +81,8 @@ EXPORT_SYMBOL_GPL(dw_mci_pltfm_pmops);
>
> static const struct of_device_id dw_mci_pltfm_match[] = {
> { .compatible = "snps,dw-mshc", },
> - { .compatible = "altr,socfpga-dw-mshc",
> - .data = &socfpga_drv_data },
> - { .compatible = "img,pistachio-dw-mshc",
> - .data = &pistachio_drv_data },
> + { .compatible = "altr,socfpga-dw-mshc", },
> + { .compatible = "img,pistachio-dw-mshc", },
> {},
> };
> MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match);
> diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
> index d9c92f3..84e50f3 100644
> --- a/drivers/mmc/host/dw_mmc-rockchip.c
> +++ b/drivers/mmc/host/dw_mmc-rockchip.c
> @@ -26,11 +26,6 @@ struct dw_mci_rockchip_priv_data {
> int default_sample_phase;
> };
>
> -static void dw_mci_rockchip_prepare_command(struct dw_mci *host, u32 *cmdr)
> -{
> - *cmdr |= SDMMC_CMD_USE_HOLD_REG;
> -}
> -
> static int dw_mci_rk3288_setup_clock(struct dw_mci *host)
> {
> host->bus_hz /= RK3288_CLKGEN_DIV;
> @@ -240,12 +235,10 @@ static int dw_mci_rockchip_init(struct dw_mci *host)
> }
>
> static const struct dw_mci_drv_data rk2928_drv_data = {
> - .prepare_command = dw_mci_rockchip_prepare_command,
> .init = dw_mci_rockchip_init,
> };
>
> static const struct dw_mci_drv_data rk3288_drv_data = {
> - .prepare_command = dw_mci_rockchip_prepare_command,
> .set_ios = dw_mci_rk3288_set_ios,
> .execute_tuning = dw_mci_rk3288_execute_tuning,
> .parse_dt = dw_mci_rk3288_parse_dt,
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index ffef24a..844f8cf 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -234,7 +234,6 @@ static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd)
> struct mmc_data *data;
> struct dw_mci_slot *slot = mmc_priv(mmc);
> struct dw_mci *host = slot->host;
> - const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
> u32 cmdr;
>
> cmd->error = -EINPROGRESS;
> @@ -296,8 +295,8 @@ static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd)
> cmdr |= SDMMC_CMD_DAT_WR;
> }
>
> - if (drv_data && drv_data->prepare_command)
> - drv_data->prepare_command(slot->host, &cmdr);
> + if (!host->no_use_hold)
> + cmdr |= SDMMC_CMD_USE_HOLD_REG;
>
> return cmdr;
> }
> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
> index a14b7fc..c0fc0e3 100644
> --- a/drivers/mmc/host/dw_mmc.h
> +++ b/drivers/mmc/host/dw_mmc.h
> @@ -277,7 +277,6 @@ struct dw_mci_slot {
> * @caps: mmc subsystem specified capabilities of the controller(s).
> * @init: early implementation specific initialization.
> * @setup_clock: implementation specific clock configuration.
> - * @prepare_command: handle CMD register extensions.
> * @set_ios: handle bus specific extensions.
> * @parse_dt: parse implementation specific device tree properties.
> * @execute_tuning: implementation specific tuning procedure.
> @@ -290,7 +289,6 @@ struct dw_mci_drv_data {
> unsigned long *caps;
> int (*init)(struct dw_mci *host);
> int (*setup_clock)(struct dw_mci *host);
> - void (*prepare_command)(struct dw_mci *host, u32 *cmdr);
> void (*set_ios)(struct dw_mci *host, struct mmc_ios *ios);
> int (*parse_dt)(struct dw_mci *host);
> int (*execute_tuning)(struct dw_mci_slot *slot, u32 opcode);
> diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
> index 89df7ab..7b1416a 100644
> --- a/include/linux/mmc/dw_mmc.h
> +++ b/include/linux/mmc/dw_mmc.h
> @@ -221,6 +221,8 @@ struct dw_mci {
>
> struct timer_list cmd11_timer;
> struct timer_list dto_timer;
> +
> + int no_use_hold;
> };
>
> /* DMA ops for Internal/External DMAC interface */
>>
>>
>> Shawn Lin (3):
>> mmc: dw_mmc: expose dw_mci_pltfm_prepare_command
>> mmc: dw_mmc-rockchip: remove prepare_command hook
>> mmc: dw_mmc-exynos: wrapper prepare_command
>>
>> drivers/mmc/host/dw_mmc-exynos.c | 4 ++--
>> drivers/mmc/host/dw_mmc-pltfm.c | 3 ++-
>> drivers/mmc/host/dw_mmc-pltfm.h | 2 +-
>> drivers/mmc/host/dw_mmc-rockchip.c | 9 ++-------
>> 4 files changed, 7 insertions(+), 11 deletions(-)
>>
>
>
>
>
--
Best Regards
Shawn Lin
Powered by blists - more mailing lists