lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20160120174223.53ccc36b@xhacker>
Date:	Wed, 20 Jan 2016 17:42:23 +0800
From:	Jisheng Zhang <jszhang@...vell.com>
To:	Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
CC:	<thomas.petazzoni@...e-electrons.com>, <davem@...emloft.net>,
	<mw@...ihalf.com>, <robh+dt@...nel.org>, <pawel.moll@....com>,
	<mark.rutland@....com>, <ijc+devicetree@...lion.org.uk>,
	<galak@...eaurora.org>, <devicetree@...r.kernel.org>,
	<netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 3/4] net: mvneta: mmc: get optional axi clk

On Wed, 20 Jan 2016 10:31:18 +0100 Sebastian Hesselbarth  wrote:

> On January 20, 2016 9:15:22 AM Jisheng Zhang wrote:
> 
> > Some platforms may provide more than one clk for the mvneta IP, for
> > example Marvell BG4CT provides "core" clk for the mac core, and
> > "axi" clk for the AXI bus logic. Obviously this "axi" clk also need to
> > be enabled. This patch adds this optional "axi" clk support.  
> 
> Jisheng,
> 
> although I do not expect mvneta to appear on a non-AXI bus
> anytime soon, how about naming the clock "bus" instead?

Good question. IIRC, this IP expects AXI bus, but I'll check with HW people.

Thanks a lot,
Jisheng

> 
> If you know the clock is only required for bus master DMA but
> not for register access, "dma" would be an even better name.
> 
> Sebastian
> 
> 
> > Signed-off-by: Jisheng Zhang <jszhang@...vell.com>
> > ---
> >  drivers/net/ethernet/marvell/mvneta.c | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> >
> > diff --git a/drivers/net/ethernet/marvell/mvneta.c 
> > b/drivers/net/ethernet/marvell/mvneta.c
> > index aca0a73..6bb709a 100644
> > --- a/drivers/net/ethernet/marvell/mvneta.c
> > +++ b/drivers/net/ethernet/marvell/mvneta.c
> > @@ -373,6 +373,8 @@ struct mvneta_port {
> >
> >  	/* Core clock */
> >  	struct clk *clk;
> > +	/* AXI clock */
> > +	struct clk *clk_axi;
> >  	u8 mcast_count[256];
> >  	u16 tx_ring_size;
> >  	u16 rx_ring_size;
> > @@ -3615,6 +3617,10 @@ static int mvneta_probe(struct platform_device *pdev)
> >
> >  	clk_prepare_enable(pp->clk);
> >
> > +	pp->clk_axi = devm_clk_get(&pdev->dev, "axi");
> > +	if (!IS_ERR(pp->clk_axi))
> > +		clk_prepare_enable(pp->clk_axi);
> > +
> >  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> >  	pp->base = devm_ioremap_resource(&pdev->dev, res);
> >  	if (IS_ERR(pp->base)) {
> > @@ -3727,6 +3733,7 @@ err_free_ports:
> >  	free_percpu(pp->ports);
> >  err_clk:
> >  	clk_disable_unprepare(pp->clk);
> > +	clk_disable_unprepare(pp->clk_axi);
> >  err_put_phy_node:
> >  	of_node_put(phy_node);
> >  err_free_irq:
> > @@ -3744,6 +3751,7 @@ static int mvneta_remove(struct platform_device *pdev)
> >
> >  	unregister_netdev(dev);
> >  	clk_disable_unprepare(pp->clk);
> > +	clk_disable_unprepare(pp->clk_axi);
> >  	free_percpu(pp->ports);
> >  	free_percpu(pp->stats);
> >  	irq_dispose_mapping(dev->irq);
> > --
> > 2.7.0.rc3
> >  
> 
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ