linux-kernel - [PATCHv2 12/16] ARM: dts: imx6ul: add gpmi support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1453284549-16363-13-git-send-email-LW@KARO-electronics.de>
Date:	Wed, 20 Jan 2016 11:09:05 +0100
From:	Lothar Waßmann <LW@...O-electronics.de>
To:	Anson Huang <b20788@...escale.com>,
	Bai Ping <b51503@...escale.com>,
	Frank Li <Frank.Li@...escale.com>,
	Fugang Duan <B38611@...escale.com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Lothar Waßmann <LW@...O-electronics.de>,
	Mark Rutland <mark.rutland@....com>,
	Michael Turquette <mturquette@...libre.com>,
	Pawel Moll <pawel.moll@....com>,
	Rob Herring <robh+dt@...nel.org>,
	Russell King <linux@....linux.org.uk>,
	Sascha Hauer <kernel@...gutronix.de>,
	Shawn Guo <shawnguo@...nel.org>,
	Stephen Boyd <sboyd@...eaurora.org>,
	devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCHv2 12/16] ARM: dts: imx6ul: add gpmi support

Add the device node for the i.MX6UL GPMI interface and the related
APBH DMA which is necessary for the GPMI to work properly.

Signed-off-by: Lothar Waßmann <LW@...O-electronics.de>
---
 arch/arm/boot/dts/imx6ul.dtsi | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 985c1b1..8499b3d 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -141,6 +141,39 @@
 			reg = <0x00900000 0x20000>;
 		};
 
+		dma_apbh: dma-apbh@...04000 {
+			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x01804000 0x2000>;
+			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clks IMX6UL_CLK_APBHDMA>;
+		};
+
+		gpmi: gpmi-nand@...06000         {
+			compatible = "fsl,imx6q-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x01806000 0x2000>, <0x01808000 0x2000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clks IMX6UL_CLK_GPMI_IO>,
+				 <&clks IMX6UL_CLK_GPMI_APB>,
+				 <&clks IMX6UL_CLK_GPMI_BCH>,
+				 <&clks IMX6UL_CLK_GPMI_BCH_APB>,
+				 <&clks IMX6UL_CLK_PER_BCH>;
+			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+				      "gpmi_bch_apb", "per1_bch";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
 		aips1: aips-bus@...00000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
-- 
2.1.4