linux-kernel - [PATCHv2 06/16] ARM: dts: imx6ul: disable PWMs by default

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1453284549-16363-7-git-send-email-LW@KARO-electronics.de>
Date:	Wed, 20 Jan 2016 11:08:59 +0100
From:	Lothar Waßmann <LW@...O-electronics.de>
To:	Anson Huang <b20788@...escale.com>,
	Bai Ping <b51503@...escale.com>,
	Frank Li <Frank.Li@...escale.com>,
	Fugang Duan <B38611@...escale.com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Lothar Waßmann <LW@...O-electronics.de>,
	Mark Rutland <mark.rutland@....com>,
	Michael Turquette <mturquette@...libre.com>,
	Pawel Moll <pawel.moll@....com>,
	Rob Herring <robh+dt@...nel.org>,
	Russell King <linux@....linux.org.uk>,
	Sascha Hauer <kernel@...gutronix.de>,
	Shawn Guo <shawnguo@...nel.org>,
	Stephen Boyd <sboyd@...eaurora.org>,
	devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCHv2 06/16] ARM: dts: imx6ul: disable PWMs by default

Since PWMs are only useful if they are actually connected to an output pin,
let users enable them explicitly in their device trees where they should
also set up the pin configuration. This is in sync with a recent change
(commit e2675266b39b "ARM: dts: imx6qdl: disable PWMs by default")
to other i.MX SoCs.

Signed-off-by: Lothar Waßmann <LW@...O-electronics.de>
---
 arch/arm/boot/dts/imx6ul.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 3aba0bb..863777e 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -512,6 +512,7 @@
 					 <&clks IMX6UL_CLK_PWM5>;
 				clock-names = "ipg", "per";
 				#pwm-cells = <2>;
+				status = "disabled";
 			};
 
 			pwm6: pwm@...f4000 {
@@ -522,6 +523,7 @@
 					 <&clks IMX6UL_CLK_PWM6>;
 				clock-names = "ipg", "per";
 				#pwm-cells = <2>;
+				status = "disabled";
 			};
 
 			pwm7: pwm@...f8000 {
@@ -532,6 +534,7 @@
 					 <&clks IMX6UL_CLK_PWM7>;
 				clock-names = "ipg", "per";
 				#pwm-cells = <2>;
+				status = "disabled";
 			};
 
 			pwm8: pwm@...fc000 {
@@ -542,6 +545,7 @@
 					 <&clks IMX6UL_CLK_PWM8>;
 				clock-names = "ipg", "per";
 				#pwm-cells = <2>;
+				status = "disabled";
 			};
 		};
 
-- 
2.1.4