| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1453417415-19110-3-git-send-email-john.stultz@linaro.org>
Date: Thu, 21 Jan 2016 15:03:35 -0800
From: John Stultz <john.stultz@...aro.org>
To: lkml <linux-kernel@...r.kernel.org>
Cc: John Stultz <john.stultz@...aro.org>,
Sasha Levin <sasha.levin@...cle.com>,
Richard Cochran <richardcochran@...il.com>,
Thomas Gleixner <tglx@...utronix.de>,
Prarit Bhargava <prarit@...hat.com>,
Harald Hoyer <harald@...hat.com>, Kay Sievers <kay@...y.org>,
David Herrmann <dh.herrmann@...il.com>,
Shuah Khan <shuahkh@....samsung.com>
Subject: [PATCH 2/2] kselftests: timers: Add adjtimex SETOFFSET validity tests
Add some simple tests to check both valid and invalid
offsets when using adjtimex's ADJ_SETOFFSET method.
Cc: Sasha Levin <sasha.levin@...cle.com>
Cc: Richard Cochran <richardcochran@...il.com>
Cc: Thomas Gleixner <tglx@...utronix.de>
Cc: Prarit Bhargava <prarit@...hat.com>
Cc: Harald Hoyer <harald@...hat.com>
Cc: Kay Sievers <kay@...y.org>
Cc: David Herrmann <dh.herrmann@...il.com>
Cc: Shuah Khan <shuahkh@....samsung.com>
Signed-off-by: John Stultz <john.stultz@...aro.org>
---
tools/testing/selftests/timers/valid-adjtimex.c | 139 +++++++++++++++++++++++-
1 file changed, 138 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/timers/valid-adjtimex.c b/tools/testing/selftests/timers/valid-adjtimex.c
index e86d937..60fe3c5 100644
--- a/tools/testing/selftests/timers/valid-adjtimex.c
+++ b/tools/testing/selftests/timers/valid-adjtimex.c
@@ -45,7 +45,17 @@ static inline int ksft_exit_fail(void)
}
#endif
-#define NSEC_PER_SEC 1000000000L
+#define NSEC_PER_SEC 1000000000LL
+#define USEC_PER_SEC 1000000LL
+
+#define ADJ_SETOFFSET 0x0100
+
+#include <sys/syscall.h>
+static int clock_adjtime(clockid_t id, struct timex *tx)
+{
+ return syscall(__NR_clock_adjtime, id, tx);
+}
+
/* clear NTP time_status & time_state */
int clear_time_state(void)
@@ -193,10 +203,137 @@ out:
}
+int set_offset(long long offset, int use_nano)
+{
+ struct timex tmx = {};
+ int ret;
+
+ tmx.modes = ADJ_SETOFFSET;
+ if (use_nano) {
+ tmx.modes |= ADJ_NANO;
+
+ tmx.time.tv_sec = offset / NSEC_PER_SEC;
+ tmx.time.tv_usec = offset % NSEC_PER_SEC;
+
+ if (offset < 0 && tmx.time.tv_usec) {
+ tmx.time.tv_sec -= 1;
+ tmx.time.tv_usec += NSEC_PER_SEC;
+ }
+ } else {
+ tmx.time.tv_sec = offset / USEC_PER_SEC;
+ tmx.time.tv_usec = offset % USEC_PER_SEC;
+
+ if (offset < 0 && tmx.time.tv_usec) {
+ tmx.time.tv_sec -= 1;
+ tmx.time.tv_usec += USEC_PER_SEC;
+ }
+ }
+
+ ret = clock_adjtime(CLOCK_REALTIME, &tmx);
+ if (ret < 0) {
+ printf("(sec: %ld usec: %ld) ", tmx.time.tv_sec, tmx.time.tv_usec);
+ printf("[FAIL]\n");
+ return -1;
+ }
+ return 0;
+}
+
+int set_bad_offset(long sec, long usec, int use_nano)
+{
+ struct timex tmx = {};
+ int ret;
+
+ tmx.modes = ADJ_SETOFFSET;
+ if (use_nano)
+ tmx.modes |= ADJ_NANO;
+
+ tmx.time.tv_sec = sec;
+ tmx.time.tv_usec = usec;
+ ret = clock_adjtime(CLOCK_REALTIME, &tmx);
+ if (ret >= 0) {
+ printf("Invalid (sec: %ld usec: %ld) did not fail! ", tmx.time.tv_sec, tmx.time.tv_usec);
+ printf("[FAIL]\n");
+ return -1;
+ }
+ return 0;
+}
+
+int validate_set_offset(void)
+{
+ printf("Testing ADJ_SETOFFSET... ");
+
+ /* Test valid values */
+ if (set_offset(NSEC_PER_SEC - 1, 1))
+ return -1;
+
+ if (set_offset(-NSEC_PER_SEC + 1, 1))
+ return -1;
+
+ if (set_offset(-NSEC_PER_SEC - 1, 1))
+ return -1;
+
+ if (set_offset(5 * NSEC_PER_SEC, 1))
+ return -1;
+
+ if (set_offset(-5 * NSEC_PER_SEC, 1))
+ return -1;
+
+ if (set_offset(5 * NSEC_PER_SEC + NSEC_PER_SEC / 2, 1))
+ return -1;
+
+ if (set_offset(-5 * NSEC_PER_SEC - NSEC_PER_SEC / 2, 1))
+ return -1;
+
+ if (set_offset(USEC_PER_SEC - 1, 0))
+ return -1;
+
+ if (set_offset(-USEC_PER_SEC + 1, 0))
+ return -1;
+
+ if (set_offset(-USEC_PER_SEC - 1, 0))
+ return -1;
+
+ if (set_offset(5 * USEC_PER_SEC, 0))
+ return -1;
+
+ if (set_offset(-5 * USEC_PER_SEC, 0))
+ return -1;
+
+ if (set_offset(5 * USEC_PER_SEC + USEC_PER_SEC / 2, 0))
+ return -1;
+
+ if (set_offset(-5 * USEC_PER_SEC - USEC_PER_SEC / 2, 0))
+ return -1;
+
+ /* Test invalid values */
+ if (set_bad_offset(0, -1, 1))
+ return -1;
+ if (set_bad_offset(0, -1, 0))
+ return -1;
+ if (set_bad_offset(0, 2 * NSEC_PER_SEC, 1))
+ return -1;
+ if (set_bad_offset(0, 2 * USEC_PER_SEC, 0))
+ return -1;
+ if (set_bad_offset(0, NSEC_PER_SEC, 1))
+ return -1;
+ if (set_bad_offset(0, USEC_PER_SEC, 0))
+ return -1;
+ if (set_bad_offset(0, -NSEC_PER_SEC, 1))
+ return -1;
+ if (set_bad_offset(0, -USEC_PER_SEC, 0))
+ return -1;
+
+ printf("[OK]\n");
+ return 0;
+}
+
int main(int argc, char **argv)
{
if (validate_freq())
return ksft_exit_fail();
+ if (validate_set_offset())
+ return ksft_exit_fail();
+
return ksft_exit_pass();
}
--
1.9.1
Powered by blists - more mailing lists