[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <56A6E2D5.7040104@huawei.com>
Date: Tue, 26 Jan 2016 11:07:01 +0800
From: xuejiancheng <xuejiancheng@...wei.com>
To: <mturquette@...libre.com>, <sboyd@...eaurora.org>,
<p.zabel@...gutronix.de>, <robh+dt@...nel.org>,
<pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
<linux@....linux.org.uk>, <khilman@...aro.org>, <arnd@...db.de>,
<olof@...om.net>, <xuwei5@...ilicon.com>,
<haojian.zhuang@...aro.org>, <zhangfei.gao@...aro.org>,
<bintian.wang@...wei.com>
CC: <linux-kernel@...r.kernel.org>, <linux-clk@...r.kernel.org>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <yanhaifeng@...ilicon.com>,
<yanghongwei@...ilicon.com>, <suwenping@...ilicon.com>,
<raojun@...ilicon.com>, <ml.yang@...ilicon.com>,
<gaofei@...ilicon.com>, <zhangzhenxing@...ilicon.com>,
<xuejiancheng@...ilicon.com>, <lidongpo@...ilicon.com>
Subject: Re: [PATCH v7 4/6] ARM: debug: add hi3519 debug uart
On 2016/1/25 11:01, Jiancheng Xue wrote:
> add hi3519 debug uart
>
> Signed-off-by: Jiancheng Xue <xuejiancheng@...wei.com>
> ---
> arch/arm/Kconfig.debug | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index c6b6175..b02a7c1 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -260,6 +260,14 @@ choice
> Say Y here if you want kernel low-level debugging support
> on Cortina Gemini based platforms.
>
> + config DEBUG_HI3519_UART
> + bool "Hisilicon HI3519 Debug UART"
> + depends on ARCH_HISI
> + select DEBUG_UART_PL01X
> + help
> + Say Y here if you want kernel low-level debugging support
> + on HI3519 UART.
> +
> config DEBUG_HI3620_UART
> bool "Hisilicon HI3620 Debug UART"
> depends on ARCH_HI3xxx
> @@ -1451,6 +1459,7 @@ config DEBUG_UART_PHYS
> default 0x11002000 if DEBUG_MT8127_UART0
> default 0x11006000 if DEBUG_MT6589_UART0
> default 0x11009000 if DEBUG_MT8135_UART3
> + default 0x12100000 if DEBUG_HI3519_UART
> default 0x16000000 if DEBUG_INTEGRATOR
> default 0x18000300 if DEBUG_BCM_5301X
> default 0x18010000 if DEBUG_SIRFATLAS7_UART0
> @@ -1514,6 +1523,7 @@ config DEBUG_UART_PHYS
> default 0xfcb00000 if DEBUG_HI3620_UART
> default 0xfd883000 if DEBUG_ALPINE_UART0
> default 0xfe800000 if ARCH_IOP32X
> + default 0xfef00000 if DEBUG_HI3519_UART
Sorry. This line is put in a wrong place by my mistake. I'll correct it in next version.
> default 0xff690000 if DEBUG_RK32_UART2
> default 0xffc02000 if DEBUG_SOCFPGA_UART0
> default 0xffc02100 if DEBUG_SOCFPGA_UART1
>
Powered by blists - more mailing lists