[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1453871378-4175-1-git-send-email-shawn.lin@rock-chips.com>
Date: Wed, 27 Jan 2016 13:09:38 +0800
From: Shawn Lin <shawn.lin@...k-chips.com>
To: Ulf Hansson <ulf.hansson@...aro.org>
Cc: bcm-kernel-feedback-list@...adcom.com,
linux-rpi-kernel@...ts.infradead.org, linux-mmc@...r.kernel.org,
linux-kernel@...r.kernel.org, Shawn Lin <shawn.lin@...k-chips.com>
Subject: [RFC PATCH 21/21] mmc: sdhci.h: remove SDHCI_QUIRK_BROKEN_CARD_DETECTION
We remove SDHCI_QUIRK_BROKEN_CARD_DETECTION since now
sdhci core and variant drivers will not use it. And we
also move up the quirk number one-by-one.
Signed-off-by: Shawn Lin <shawn.lin@...k-chips.com>
---
drivers/mmc/host/sdhci.h | 30 ++++++++++++++----------------
1 file changed, 14 insertions(+), 16 deletions(-)
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 7654ae5..41988ef 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -356,36 +356,34 @@ struct sdhci_host {
#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
/* Controller does not provide transfer-complete interrupt when not busy */
#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14)
-/* Controller has unreliable card detection */
-#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15)
/* Controller reports inverted write-protect state */
-#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16)
+#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<15)
/* Controller does not like fast PIO transfers */
-#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18)
+#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<16)
/* Controller has to be forced to use block size of 2048 bytes */
-#define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20)
+#define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<17)
/* Controller cannot do multi-block transfers */
-#define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21)
+#define SDHCI_QUIRK_NO_MULTIBLOCK (1<<18)
/* Controller can only handle 1-bit data transfers */
-#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22)
+#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<19)
/* Controller needs 10ms delay between applying power and clock */
-#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23)
+#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<20)
/* Controller uses SDCLK instead of TMCLK for data timeouts */
-#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24)
+#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<21)
/* Controller reports wrong base clock capability */
-#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25)
+#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<22)
/* Controller cannot support End Attribute in NOP ADMA descriptor */
-#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26)
+#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<23)
/* Controller is missing device caps. Use caps provided by host */
-#define SDHCI_QUIRK_MISSING_CAPS (1<<27)
+#define SDHCI_QUIRK_MISSING_CAPS (1<<24)
/* Controller uses Auto CMD12 command to stop the transfer */
-#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28)
+#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<25)
/* Controller doesn't have HISPD bit field in HI-SPEED SD card */
-#define SDHCI_QUIRK_NO_HISPD_BIT (1<<29)
+#define SDHCI_QUIRK_NO_HISPD_BIT (1<<26)
/* Controller treats ADMA descriptors with length 0000h incorrectly */
-#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC (1<<30)
+#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC (1<<27)
/* The read-only detection via SDHCI_PRESENT_STATE register is unstable */
-#define SDHCI_QUIRK_UNSTABLE_RO_DETECT (1<<31)
+#define SDHCI_QUIRK_UNSTABLE_RO_DETECT (1<<28)
unsigned int quirks2; /* More deviations from spec. */
--
2.3.7
Powered by blists - more mailing lists