[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CABxcv=mYo+rjwhpo_CxLbCxBJaewfTQi+=NmmtM4x5zcM-qaGA@mail.gmail.com>
Date: Tue, 26 Jan 2016 23:42:31 -0300
From: Javier Martinez Canillas <javier@...hile0.org>
To: Andi Shyti <andi.shyti@...sung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@...sung.com>,
Javier Martinez Canillas <javier@....samsung.com>,
Linux Kernel <linux-kernel@...r.kernel.org>,
Kukjin Kim <kgene@...nel.org>, rtc-linux@...glegroups.com,
Chanwoo Choi <cw00.choi@...sung.com>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
Laxman Dewangan <ldewangan@...dia.com>,
"linux-samsung-soc@...r.kernel.org"
<linux-samsung-soc@...r.kernel.org>
Subject: Re: [PATCH v3 07/10] rtc: max77686: Use dev_warn() instead of pr_warn()
Hello Andi,
On Tue, Jan 26, 2016 at 11:35 PM, Andi Shyti <andi.shyti@...sung.com> wrote:
>> > On 01/26/2016 10:22 PM, Andi Shyti wrote:
>> >> Hi Javier,
>> >>
>> >>> if (tm->tm_year < 100) {
>> >>> - pr_warn("RTC can't handle year %d. Assume it's 2000.\n",
>> >>> - 1900 + tm->tm_year);
>> >>> + dev_warn(info->dev,
>> >>> + "RTC can't handle year %d. Assume it's 2000\n",
>> >>> + 1900 + tm->tm_year);
>> >>> return -EINVAL;
>> >>
>> >> Because we are returning an error value, why not use dev_err()?
>> >>
>> >
>> > You are absolutely right. Since the driver was using pr_warn(), I used
>> > dev_warn() but dev_err() would had been correct.
>>
>> Wait. The message says that "2000 will be assumed" which is not an
>> error. The message indicates that driver will proceed, thus the warning.
>>
>> However the driver won't proceed because the max77686_rtc_set_time()
>> will abort. This came from max8997 which has the same issue.
>>
>> This means that either message should be changed (dev_err() without the
>> "assume" verb) or the function should not abort and set the year to
>> 2000+something (then dev_warn()... look at rtc-ds3234.c and rtc-mcp795.c).
>>
>> The easiest would be to choose #1 - no changes in the logic.
>
> Nevertheless, the function fails, and those who call
> max77686_rtc_tm_to_data() fail as well, so, we are printing
> warning, but behaving as error.
>
> Either we print error and return error, or we print warning, we
> set:
>
> tm->tm_year = 100; /* don't know if I got the logic right */
>
> and return 0
>
> Right?
>
I was thinking in moving the check at the start of the function so a
on error, the RTC sec/min/hour/etc registers are untouched.
> Thanks,
> Andi
> --
Best regards,
Javier
Powered by blists - more mailing lists