| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <56C1BEE3.4000904@xs4all.nl> Date: Mon, 15 Feb 2016 13:04:51 +0100 From: Hans Verkuil <hverkuil@...all.nl> To: Tiffany Lin <tiffany.lin@...iatek.com>, Hans Verkuil <hans.verkuil@...co.com>, daniel.thompson@...aro.org, Rob Herring <robh+dt@...nel.org>, Mauro Carvalho Chehab <mchehab@....samsung.com>, Matthias Brugger <matthias.bgg@...il.com>, Daniel Kurtz <djkurtz@...omium.org>, Pawel Osciak <posciak@...omium.org> Cc: Eddie Huang <eddie.huang@...iatek.com>, Yingjoe Chen <yingjoe.chen@...iatek.com>, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, linux-media@...r.kernel.org, linux-mediatek@...ts.infradead.org, PoChun.Lin@...iatek.com Subject: Re: [PATCH v4 0/8] Add MT8173 Video Encoder Driver and VPU Driver Hi Tiffany, Once again, thanks for your patch series! I have some more comments below. On 02/04/2016 12:34 PM, Tiffany Lin wrote: > > ============== > Introduction > ============== > > The purpose of this series is to add the driver for video codec hw embedded in the Mediatek's MT8173 SoCs. > Mediatek Video Codec is able to handle video encoding of in a range of formats. > > This patch series also include VPU driver. Mediatek Video Codec driver rely on VPU driver to load, communicate with VPU. > > Internally the driver uses videobuf2 framework and MTK IOMMU and MTK SMI. > MTK IOMMU[1] and MTK SMI[2] have not yet been merged, but we wanted to start discussion about the driver earlier so it could be merged sooner. > > [1]https://patchwork.kernel.org/patch/8120921/ > [2]https://patchwork.kernel.org/patch/8120941/ > > > ================== > Device interface > ================== > > In principle the driver bases on v4l2 memory-to-memory framework: > it provides a single video node and each opened file handle gets its own private context with separate buffer queues. Each context consist of 2 buffer queues: OUTPUT (for source buffers, i.e. raw video frames) and CAPTURE (for destination buffers, i.e. encoded video frames). > > ============================== > VPU (Video Processor Unit) > ============================== > The VPU driver for hw video codec embedded in Mediatek's MT8173 SOCs. > It is able to handle video decoding/encoding in a range of formats. > The driver provides with VPU firmware download, memory management and the communication interface between CPU and VPU. > For VPU initialization, it will create virtual memory for CPU access and physical address for VPU hw device access. When a decode/encode instance opens a device node, vpu driver will download vpu firmware to the device. > A decode/encode instant will decode/encode a frame using VPU interface to interrupt vpu to handle decoding/encoding jobs. > > Please have a look at the code and comments will be very much appreciated. > > > Change in v4: > Vcodec Part > 1. Remove MTK_ENCODE_PARAM_SKIP_FRAME support > 2. Remove MTK_ENCODE_PARAM_FRAME_TYPE and change to use V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME[3] > 3. Refine Encoder HW clock source > 4. Refine debug log > 5. Add watchdog support > 6. With patch "media: v4l2-compat-ioctl32: fix missing length copy in put_v4l2_buffer32"[4], v4l2-compliance test passed[5] in v4.4-rc5 > > VPU Part > 1. These two patches were Acked-by: Rob Herring <robh@...nel.org> in v3 > [PATCH v3 1/8] dt-bindings: Add a binding for Mediatek Video Processor > [PATCH v3 3/8] arm64: dts: mediatek: Add node for Mediatek Video Processor Unit > Because we were wrong about how the hardware works, there is no connection between VPU and IOMMU HW > We remove VPU attaching to IOMMU > 2. Support VPU running on 4GB DRAM system > 3. Support VPU watchdog reset > 4. Refine for coding style > > [3]https://patchwork.linuxtv.org/patch/32670/ > [4] https://patchwork.linuxtv.org/patch/32631/ > [5]localhost ~ # /usr/bin/v4l2-compliance -d /dev/video1 > Driver Info: > Driver name : mtk-vcodec-en > Card type : platform:mt817 > Bus info : platform:mt817 Perhaps this should be mt817x? > Driver version: 4.4.0 > Capabilities : 0x84204000 > Video Memory-to-Memory Multiplanar > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04204000 > Video Memory-to-Memory Multiplanar > Streaming > Extended Pix Format > > Compliance test for device /dev/video1 (not using libv4l2): > > Required ioctls: > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second video open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERYCTRL/MENU: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 12 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > warn: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(475): VIDIOC_CREATE_BUFS not supported > warn: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(475): VIDIOC_CREATE_BUFS not supported > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > > Total: 38, Succeeded: 38, Failed: 0, Warnings: 2 Looks great! Having reviewed the v4 patch series I'd say it is close to being ready (at least w.r.t. the V4L2 parts). Most of my comments are minor, but fixing the open() limitation is probably a bigger change on your side. It should be well worth the effort, though. In my experience limiting the number of time you can call open() is always a sign of a design flaw and the code improves if this is handled in the right place (usually start_streaming, which is when you actually start to use the hardware). And besides, limiting the number of open()s is out-of-spec. Regards, Hans > > > Change in v3: > 1.Refine code to pass v4l2-compliance test, now it still has 2 issues 2.Refine code according to latest MTK IOMMU patches[1] 3.Remove MFC51 specific CIDs and add MTK specific CIDs for for keyframe and > skip I-frame > 4.Refine code according to review comments > > Below is the v1.6 version v4l2-compliance report for the mt8173 encoder driver. > Now there are still 2 test fail in v1.6. > For VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF, we directly use v4l2_m2m_ioctl_* functions, but it still fail. It pass in kernel 3.18 but fail in kernel 4.4. > We will try v1.8 in next version. > VIDIOC_EXPBUF is becuase we support all three memory types VB2_DMABUF, VB2_MMAP and VB2_USERPTR. VIDIOC_EXPBUF only allowed when only VB2_MMAP supported. > localhost ~ # /usr/bin/v4l2-compliance -d /dev/video1 Driver Info: > Driver name : mtk-vcodec-en > Card type : platform:mt817 > Bus info : platform:mt817 > Driver version: 4.4.0 > Capabilities : 0x84204000 > Video Memory-to-Memory Multiplanar > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04204000 > Video Memory-to-Memory Multiplanar > Streaming > Extended Pix Format > > Compliance test for device /dev/video1 (not using libv4l2): > > Required ioctls: > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second video open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERYCTRL/MENU: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 11 Private Controls: 2 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(266): vp->length == 0 > fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(335): buf.check(Unqueued, i) > fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(420): testQueryBuf(node, i, q.g_buffers()) > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL > fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(500): q.has_expbuf(node) > test VIDIOC_EXPBUF: FAIL > Total: 38, Succeeded: 36, Failed: 2, Warnings: 0 > > > Change in v2: > Vcodec Part > 1.Remove common and include directory in mtk-vcodec 2.Refine vb2ops_venc_start_streaming and vb2ops_venc_stop_streaming and state machine 3.Remove venc_if_init and venc_if_deinit 4.Refine debug message 5.Refine lab and vpu decription in mediatek-vcodec.txt > > VPU Part > 1. Modify VPU Kconfig > 2. Move encoder header files to other patch sets 3. Remove marcos for extended virtual/iova address 4. Change register and variable names 5. Add a reference counter for VPU watchdog 6. Remove one busy waiting in function vpu_ipi_send 7. Operate VPU clock in VPU driver (not called by encoder drivers) 8. Refine memory mapping, firmware download and extended memory allocation/free functions 9. Release more allocated resources in driver remove function > > > > Andrew-CT Chen (2): > dt-bindings: Add a binding for Mediatek Video Processor > [Media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver > > Tiffany Lin (6): > [media] VPU: mediatek: support Mediatek VPU > arm64: dts: mediatek: Add node for Mediatek Video Processor Unit > dt-bindings: Add a binding for Mediatek Video Encoder > [media] vcodec: mediatek: Add Mediatek VP8 Video Encoder Driver > [media] vcodec: mediatek: Add Mediatek H264 Video Encoder Driver > arm64: dts: mediatek: Add Video Encoder for MT8173 > > .../devicetree/bindings/media/mediatek-vcodec.txt | 59 + > .../devicetree/bindings/media/mediatek-vpu.txt | 31 + > arch/arm64/boot/dts/mediatek/mt8173.dtsi | 62 + > drivers/media/platform/Kconfig | 20 + > drivers/media/platform/Makefile | 4 + > drivers/media/platform/mtk-vcodec/Makefile | 11 + > .../media/platform/mtk-vcodec/h264_enc/Makefile | 6 + > .../platform/mtk-vcodec/h264_enc/venc_h264_if.c | 540 ++++++++ > .../platform/mtk-vcodec/h264_enc/venc_h264_if.h | 165 +++ > .../platform/mtk-vcodec/h264_enc/venc_h264_vpu.c | 309 +++++ > .../platform/mtk-vcodec/h264_enc/venc_h264_vpu.h | 30 + > drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h | 388 ++++++ > drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 1380 ++++++++++++++++++++ > drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.h | 46 + > .../media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 476 +++++++ > .../media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c | 132 ++ > .../media/platform/mtk-vcodec/mtk_vcodec_intr.c | 102 ++ > .../media/platform/mtk-vcodec/mtk_vcodec_intr.h | 29 + > drivers/media/platform/mtk-vcodec/mtk_vcodec_pm.h | 26 + > .../media/platform/mtk-vcodec/mtk_vcodec_util.c | 106 ++ > .../media/platform/mtk-vcodec/mtk_vcodec_util.h | 85 ++ > drivers/media/platform/mtk-vcodec/venc_drv_base.h | 62 + > drivers/media/platform/mtk-vcodec/venc_drv_if.c | 106 ++ > drivers/media/platform/mtk-vcodec/venc_drv_if.h | 175 +++ > drivers/media/platform/mtk-vcodec/venc_ipi_msg.h | 212 +++ > drivers/media/platform/mtk-vcodec/vp8_enc/Makefile | 6 + > .../platform/mtk-vcodec/vp8_enc/venc_vp8_if.c | 422 ++++++ > .../platform/mtk-vcodec/vp8_enc/venc_vp8_if.h | 149 +++ > .../platform/mtk-vcodec/vp8_enc/venc_vp8_vpu.c | 240 ++++ > .../platform/mtk-vcodec/vp8_enc/venc_vp8_vpu.h | 28 + > drivers/media/platform/mtk-vpu/Makefile | 1 + > drivers/media/platform/mtk-vpu/mtk_vpu.c | 994 ++++++++++++++ > drivers/media/platform/mtk-vpu/mtk_vpu.h | 167 +++ > include/uapi/linux/v4l2-controls.h | 4 + > 34 files changed, 6573 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/mediatek-vcodec.txt > create mode 100644 Documentation/devicetree/bindings/media/mediatek-vpu.txt > create mode 100644 drivers/media/platform/mtk-vcodec/Makefile > create mode 100644 drivers/media/platform/mtk-vcodec/h264_enc/Makefile > create mode 100644 drivers/media/platform/mtk-vcodec/h264_enc/venc_h264_if.c > create mode 100644 drivers/media/platform/mtk-vcodec/h264_enc/venc_h264_if.h > create mode 100644 drivers/media/platform/mtk-vcodec/h264_enc/venc_h264_vpu.c > create mode 100644 drivers/media/platform/mtk-vcodec/h264_enc/venc_h264_vpu.h > create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h > create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c > create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.h > create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c > create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c > create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_intr.c > create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_intr.h > create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_pm.h > create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_util.c > create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_util.h > create mode 100644 drivers/media/platform/mtk-vcodec/venc_drv_base.h > create mode 100644 drivers/media/platform/mtk-vcodec/venc_drv_if.c > create mode 100644 drivers/media/platform/mtk-vcodec/venc_drv_if.h > create mode 100644 drivers/media/platform/mtk-vcodec/venc_ipi_msg.h > create mode 100644 drivers/media/platform/mtk-vcodec/vp8_enc/Makefile > create mode 100644 drivers/media/platform/mtk-vcodec/vp8_enc/venc_vp8_if.c > create mode 100644 drivers/media/platform/mtk-vcodec/vp8_enc/venc_vp8_if.h > create mode 100644 drivers/media/platform/mtk-vcodec/vp8_enc/venc_vp8_vpu.c > create mode 100644 drivers/media/platform/mtk-vcodec/vp8_enc/venc_vp8_vpu.h > create mode 100644 drivers/media/platform/mtk-vpu/Makefile > create mode 100644 drivers/media/platform/mtk-vpu/mtk_vpu.c > create mode 100644 drivers/media/platform/mtk-vpu/mtk_vpu.h > mode change 100644 => 100755 include/uapi/linux/v4l2-controls.h >
Powered by blists - more mailing lists