Message-ID: <1455550188-25934-1-git-send-email-akarwar@marvell.com>
Date:	Mon, 15 Feb 2016 07:29:48 -0800
From:	Amitkumar Karwar <akarwar@...vell.com>
To:	<linux-bluetooth@...r.kernel.org>
CC:	Nishant Sarmukadam <nishants@...vell.com>,
	<linux-kernel@...r.kernel.org>, Cathy Luo <cluo@...vell.com>,
	<marcel@...tmann.org>, Ganapathi Bhat <gbhat@...vell.com>,
	Amitkumar Karwar <akarwar@...vell.com>
Subject: [PATCH] Bluetooth: hci_uart: Support firmware download for Marvell

From: Ganapathi Bhat <gbhat@...vell.com>

This patch implement firmware download feature for
Marvell Bluetooth devices. If firmware is already
downloaded, it will skip downloading.

Signed-off-by: Ganapathi Bhat <gbhat@...vell.com>
Signed-off-by: Amitkumar Karwar <akarwar@...vell.com>
---
 drivers/bluetooth/Kconfig     |  10 +
 drivers/bluetooth/Makefile    |   1 +
 drivers/bluetooth/btmrvl.h    |  38 +++
 drivers/bluetooth/hci_ldisc.c |  15 +-
 drivers/bluetooth/hci_mrvl.c  | 645 ++++++++++++++++++++++++++++++++++++++++++
 drivers/bluetooth/hci_uart.h  |  13 +-
 6 files changed, 720 insertions(+), 2 deletions(-)
 create mode 100644 drivers/bluetooth/btmrvl.h
 create mode 100644 drivers/bluetooth/hci_mrvl.c

diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index ec6af15..836f1c9 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -169,6 +169,16 @@ config BT_HCIUART_QCA
 
 	  Say Y here to compile support for QCA protocol.
 
+config BT_HCIUART_MRVL
+	bool "Marvell protocol support"
+	depends on BT_HCIUART
+	help
+	  Marvell is serial protocol for communication between Bluetooth
+	  device and host. This protocol is required for most Marvell Bluetooth
+	  devices with UART interface.
+
+	  Say Y here to compile support for HCI MRVL protocol.
+
 config BT_HCIBCM203X
 	tristate "HCI BCM203x USB driver"
 	depends on USB
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index 07c9cf3..f7cb408 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -36,6 +36,7 @@ hci_uart-$(CONFIG_BT_HCIUART_3WIRE)	+= hci_h5.o
 hci_uart-$(CONFIG_BT_HCIUART_INTEL)	+= hci_intel.o
 hci_uart-$(CONFIG_BT_HCIUART_BCM)	+= hci_bcm.o
 hci_uart-$(CONFIG_BT_HCIUART_QCA)	+= hci_qca.o
+hci_uart-$(CONFIG_BT_HCIUART_MRVL)	+= hci_mrvl.o
 hci_uart-objs				:= $(hci_uart-y)
 
 ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/bluetooth/btmrvl.h b/drivers/bluetooth/btmrvl.h
new file mode 100644
index 0000000..6517cdd
--- /dev/null
+++ b/drivers/bluetooth/btmrvl.h
@@ -0,0 +1,38 @@
+/* Bluetooth support for Marvell devices
+ *
+ * Copyright (C) 2016, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License").  You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available on the worldwide web at
+ * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+struct fw_data {
+	wait_queue_head_t init_wait_q __aligned(4);
+	u8 wait_fw;
+	int next_len;
+	u8 five_bytes[5];
+	u8 next_index;
+	u8 last_ack;
+	u8 expected_ack;
+	u8 fw_loaded;
+	struct ktermios old_termios;
+};
+
+#define MRVL_WAIT_TIMEOUT	12000
+#define MRVL_MAX_FW_BLOCK_SIZE	1024
+#define MRVL_MAX_RETRY_SEND	12
+#define MRVL_DNLD_DELAY		100
+#define MRVL_ACK		0x5A
+#define MRVL_NAK		0xBF
+#define MRVL_HDR_REQ_FW		0xA5
+#define MRVL_HDR_CHIP_VER	0xAA
+#define MRVL_HCI_OP_SET_BAUD	0xFC09
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 73202624..737a09f 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -163,7 +163,14 @@ restart:
 		}
 
 		hci_uart_tx_complete(hu, hci_skb_pkt_type(skb));
-		kfree_skb(skb);
+#ifdef CONFIG_BT_HCIUART_MRVL
+		if (hu->proto->id == HCI_UART_MRVL &&
+		    !test_bit(HCI_UART_DNLD_FW, &hu->flags)) {
+#endif
+			kfree_skb(skb);
+#ifdef CONFIG_BT_HCIUART_MRVL
+		}
+#endif
 	}
 
 	if (test_bit(HCI_UART_TX_WAKEUP, &hu->tx_state))
@@ -805,6 +812,9 @@ static int __init hci_uart_init(void)
 	qca_init();
 #endif
 
+#ifdef CONFIG_BT_HCIUART_MRVL
+	mrvl_init();
+#endif
 	return 0;
 }
 
@@ -836,6 +846,9 @@ static void __exit hci_uart_exit(void)
 #ifdef CONFIG_BT_HCIUART_QCA
 	qca_deinit();
 #endif
+#ifdef CONFIG_BT_HCIUART_MRVL
+	mrvl_deinit();
+#endif
 
 	/* Release tty registration of line discipline */
 	err = tty_unregister_ldisc(N_HCI);
diff --git a/drivers/bluetooth/hci_mrvl.c b/drivers/bluetooth/hci_mrvl.c
new file mode 100644
index 0000000..0072b1b
--- /dev/null
+++ b/drivers/bluetooth/hci_mrvl.c
@@ -0,0 +1,645 @@
+/* Bluetooth HCI UART driver for Marvell devices
+ *
+ * Copyright (C) 2016, Marvell International Ltd.
+ *
+ *  Acknowledgements:
+ *  This file is based on hci_h4.c, which was written
+ *  by Maxim Krasnyansky and Marcel Holtmann.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License").  You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available on the worldwide web at
+ * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/poll.h>
+
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/signal.h>
+#include <linux/ioctl.h>
+#include <linux/skbuff.h>
+#include <asm/unaligned.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
+#include <linux/proc_fs.h>
+#include "btmrvl.h"
+#include <linux/firmware.h>
+#include <linux/version.h>
+
+struct mrvl_data {
+	struct sk_buff *rx_skb;
+	struct sk_buff_head txq;
+	struct fw_data *fwdata;
+};
+
+static char helper_name[128];
+static char fw_name[128];
+
+static int mrvl_init_fw_data(struct hci_uart *hu);
+static int mrvl_recv_frame(struct hci_dev *hdev, struct sk_buff *skb);
+
+/* Initialize protocol */
+static int mrvl_open(struct hci_uart *hu)
+{
+	struct mrvl_data *mrvl;
+
+	BT_DBG("hu %p", hu);
+
+	mrvl = kzalloc(sizeof(*mrvl), GFP_KERNEL);
+	if (!mrvl)
+		return -ENOMEM;
+
+	skb_queue_head_init(&mrvl->txq);
+	hu->priv = mrvl;
+
+	return 0;
+}
+
+/* Flush protocol data */
+static int mrvl_flush(struct hci_uart *hu)
+{
+	struct mrvl_data *mrvl = hu->priv;
+
+	BT_DBG("hu %p", hu);
+
+	skb_queue_purge(&mrvl->txq);
+
+	return 0;
+}
+
+/* Close protocol */
+static int mrvl_close(struct hci_uart *hu)
+{
+	struct mrvl_data *mrvl = hu->priv;
+
+	BT_DBG("hu %p", hu);
+
+	skb_queue_purge(&mrvl->txq);
+	kfree_skb(mrvl->rx_skb);
+	kfree(mrvl->fwdata);
+	hu->priv = NULL;
+	kfree(mrvl);
+
+	return 0;
+}
+
+/* Enqueue frame for transmittion (padding, crc, etc) */
+static int mrvl_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+	struct mrvl_data *mrvl = hu->priv;
+
+	if (test_bit(HCI_UART_DNLD_FW, &hu->flags))
+		return -EBUSY;
+
+	BT_DBG("hu %p skb %p", hu, skb);
+
+	/* Prepend skb with frame type */
+	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
+	skb_queue_tail(&mrvl->txq, skb);
+
+	return 0;
+}
+
+static const struct h4_recv_pkt mrvl_recv_pkts[] = {
+	{ H4_RECV_ACL,   .recv = hci_recv_frame },
+	{ H4_RECV_SCO,   .recv = hci_recv_frame },
+	{ H4_RECV_EVENT, .recv = mrvl_recv_frame },
+};
+
+static int mrvl_recv_frame(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	int ret;
+
+	ret = hci_recv_frame(hdev, skb);
+
+	return ret;
+}
+
+/* Receive data */
+static int mrvl_recv(struct hci_uart *hu, const void *data, int count)
+{
+	struct mrvl_data *mrvl = hu->priv;
+
+	if (test_bit(HCI_UART_DNLD_FW, &hu->flags)) {
+		hci_uart_recv_data(hu, (u8 *)data, count);
+		return 0;
+	}
+
+	if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+		return -EUNATCH;
+
+	mrvl->rx_skb = h4_recv_buf(hu->hdev, mrvl->rx_skb, data, count,
+				   mrvl_recv_pkts, ARRAY_SIZE(mrvl_recv_pkts));
+	if (IS_ERR(mrvl->rx_skb)) {
+		int err = PTR_ERR(mrvl->rx_skb);
+
+		BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err);
+		mrvl->rx_skb = NULL;
+		return err;
+	}
+
+	return count;
+}
+
+static struct sk_buff *mrvl_dequeue(struct hci_uart *hu)
+{
+	struct mrvl_data *mrvl = hu->priv;
+
+	return skb_dequeue(&mrvl->txq);
+}
+
+static int mrvl_setup(struct hci_uart *hu)
+{
+	mrvl_init_fw_data(hu);
+	set_bit(HCI_UART_DNLD_FW, &hu->flags);
+
+	return hci_uart_dnld_fw(hu);
+}
+
+static const struct hci_uart_proto mrvlp = {
+	.id		= HCI_UART_MRVL,
+	.name		= "MRVL",
+	.open		= mrvl_open,
+	.close		= mrvl_close,
+	.recv		= mrvl_recv,
+	.enqueue	= mrvl_enqueue,
+	.dequeue	= mrvl_dequeue,
+	.flush		= mrvl_flush,
+	.setup		= mrvl_setup,
+};
+
+int __init mrvl_init(void)
+{
+	return hci_uart_register_proto(&mrvlp);
+}
+
+int __exit mrvl_deinit(void)
+{
+	return hci_uart_unregister_proto(&mrvlp);
+}
+
+static int get_cts(struct tty_struct *tty)
+{
+	u32 state;
+
+	if (tty->ops->tiocmget) {
+		state = tty->ops->tiocmget(tty);
+		if (state & TIOCM_CTS) {
+			BT_DBG("CTS is low\n");
+			return 1;
+		}
+		BT_DBG("CTS is high\n");
+		return 0;
+	}
+	return -1;
+}
+
+static int mrvl_init_fw_data(struct hci_uart *hu)
+{
+	struct fw_data *fwdata;
+	struct mrvl_data *mrvl = hu->priv;
+
+	fwdata = kzalloc(sizeof(*fwdata), GFP_KERNEL);
+
+	if (!fwdata) {
+		BT_ERR("Can't allocate firmware data\n");
+		return -ENOMEM;
+	}
+
+	mrvl->fwdata = fwdata;
+	fwdata->fw_loaded = 0;
+
+	init_waitqueue_head(&fwdata->init_wait_q);
+
+	return 0;
+}
+
+/* Wait for the header from device */
+static int mrvl_wait_for_hdr(struct hci_uart *hu, u8 header)
+{
+	struct mrvl_data *mrvl = hu->priv;
+	struct fw_data *fw_data = mrvl->fwdata;
+
+	fw_data->expected_ack = header;
+	fw_data->wait_fw = 0;
+
+	if (!wait_event_interruptible_timeout(fw_data->init_wait_q,
+					      fw_data->wait_fw,
+					((MRVL_WAIT_TIMEOUT) * HZ / 1000))) {
+		BT_ERR("TIMEOUT, waiting for:0x%x\n", fw_data->expected_ack);
+		return -1;
+	}
+
+	return 0;
+}
+
+/* Send bytes to device */
+static int mrvl_send_data(struct hci_uart *hu, struct sk_buff *skb)
+{
+	int retry = 0;
+	int skb_len;
+
+	skb_len = skb->len;
+	while (retry < MRVL_MAX_RETRY_SEND) {
+		hu->tx_skb = skb;
+		hci_uart_tx_wakeup(hu);
+		if (mrvl_wait_for_hdr(hu, MRVL_HDR_REQ_FW) == -1) {
+			skb_push(skb, skb_len);
+			retry++;
+			continue;
+		} else {
+			break;
+		}
+	}
+	if (retry == MRVL_MAX_RETRY_SEND)
+		return -1;
+
+	return 0;
+}
+
+/* Download firmware to the device */
+static int mrvl_dnld_fw(struct hci_uart *hu, const char *file_name)
+{
+	struct hci_dev *hdev = hu->hdev;
+	const struct firmware *fw;
+	struct sk_buff *skb = NULL;
+	int offset = 0;
+	int ret, tx_len;
+	struct mrvl_data *mrvl = hu->priv;
+	struct fw_data *fw_data = mrvl->fwdata;
+
+	BT_INFO("enter dnld_fw\n");
+
+	ret = request_firmware(&fw, file_name, &hdev->dev);
+	if (ret < 0) {
+		BT_ERR("request_firmware() failed\n");
+		ret = -1;
+		goto done;
+	}
+	if (fw) {
+		BT_INFO("Downloading FW (%lu bytes)\n", fw->size);
+	} else {
+		BT_ERR("No FW image found\n");
+		ret = -1;
+		goto done;
+	}
+
+	skb = bt_skb_alloc(MRVL_MAX_FW_BLOCK_SIZE, GFP_ATOMIC);
+	if (!skb) {
+		BT_ERR("cannot allocate memory for skb\n");
+		ret = -1;
+		goto done;
+	}
+
+	skb->dev = (void *)hdev;
+	fw_data->last_ack = 0;
+
+	do {
+		if ((offset >= fw->size) || (fw_data->last_ack))
+			break;
+		tx_len = fw_data->next_len;
+		if ((fw->size - offset) < tx_len)
+			tx_len = fw->size - offset;
+
+		memcpy(skb->data, &fw->data[offset], tx_len);
+		skb_put(skb, tx_len);
+		if (mrvl_send_data(hu, skb) != 0) {
+			BT_ERR("fail to download firmware\n");
+			ret = -1;
+			goto done;
+		}
+		skb_push(skb, tx_len);
+		skb_trim(skb, 0);
+		offset += tx_len;
+	} while (1);
+
+	BT_INFO("downloaded %d byte firmware\n", offset);
+done:
+	if (fw)
+		release_firmware(fw);
+
+	kfree(skb);
+	BT_INFO("leave dnld_fw\n");
+
+	return ret;
+}
+
+/* Get standard baud rate, given the speed */
+static unsigned int get_baud_rate(unsigned int speed)
+{
+	switch (speed) {
+	case 9600:
+		return B9600;
+	case 19200:
+		return B19200;
+	case 38400:
+		return B38400;
+	case 57600:
+		return B57600;
+	case 115200:
+		return B115200;
+	case 230400:
+		return B230400;
+	case 460800:
+		return B460800;
+	case 921600:
+		return B921600;
+	case 2000000:
+		return B2000000;
+	case 3000000:
+		return B3000000;
+	default:
+		return -1;
+	}
+}
+
+/* Set terminal properties */
+static int mrvl_set_termios(struct tty_struct *tty, unsigned int speed,
+			    unsigned char flow_ctl)
+{
+	struct ktermios old_termios = tty->termios;
+	int baud;
+
+	tty->termios.c_cflag &= ~CBAUD;
+	baud = get_baud_rate(speed);
+
+	if (baud == -1) {
+		BT_ERR("Baud rate not supported\n");
+		return -1;
+	}
+
+	tty->termios.c_cflag |= baud;
+
+	if (flow_ctl)
+		tty->termios.c_cflag |= CRTSCTS;
+	else
+		tty->termios.c_cflag &= ~CRTSCTS;
+
+	tty->ops->set_termios(tty, &old_termios);
+
+	return 0;
+}
+
+/* Check if firmware is already loaded */
+static bool mrvl_fw_loaded(struct hci_uart *hu)
+{
+	struct mrvl_data *mrvl = hu->priv;
+	struct fw_data *fw_data = mrvl->fwdata;
+
+	if ((get_cts(hu->tty)) || (fw_data->fw_loaded))
+		return 1;
+	else
+		return 0;
+}
+
+/* Set the baud rate */
+static int mrvl_set_baudrate(struct hci_uart *hu)
+{
+	struct hci_dev *hdev = hu->hdev;
+	struct sk_buff *skb;
+	static const u8 baud_param[] = { 0xc0, 0xc6, 0x2d, 0x00};
+	int err;
+
+	skb = __hci_cmd_sync(hdev, MRVL_HCI_OP_SET_BAUD, sizeof(baud_param),
+			     baud_param, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		BT_ERR("%s: Set device baudrate failed (%d)", hdev->name, err);
+		return err;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+
+/* Reset device */
+static int mrvl_reset(struct hci_uart *hu)
+{
+	struct hci_dev *hdev = hu->hdev;
+	struct sk_buff *skb;
+	int err;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		BT_ERR("%s: Reset device failed (%d)", hdev->name, err);
+		return err;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+
+/* Download helper and firmare to device */
+int hci_uart_dnld_fw(struct hci_uart *hu)
+{
+	struct mrvl_data *mrvl = hu->priv;
+	struct fw_data *fw_data = mrvl->fwdata;
+	struct tty_struct *tty = hu->tty;
+	struct ktermios new_termios;
+	struct ktermios old_termios;
+	int ret;
+
+	old_termios = tty->termios;
+
+	if (!tty) {
+		BT_ERR("tty is null\n");
+		clear_bit(HCI_UART_DNLD_FW, &hu->flags);
+		ret = -1;
+		goto fail;
+	}
+
+	if (mrvl_fw_loaded(hu)) {
+		BT_INFO("fw is running\n");
+		clear_bit(HCI_UART_DNLD_FW, &hu->flags);
+		goto set_term_baud;
+	}
+
+	ret = mrvl_set_termios(tty, 115200, 0);
+	if (ret)
+		goto fail;
+
+	ret = mrvl_wait_for_hdr(hu, MRVL_HDR_REQ_FW);
+	if (ret)
+		goto fail;
+
+	ret = mrvl_dnld_fw(hu, helper_name);
+	if (ret)
+		goto fail;
+
+	mdelay(MRVL_DNLD_DELAY);
+
+	ret = mrvl_set_termios(tty, 3000000, 1);
+	if (ret)
+		goto fail;
+
+	ret = mrvl_wait_for_hdr(hu, MRVL_HDR_CHIP_VER);
+	if (ret)
+		goto fail;
+
+	ret = mrvl_wait_for_hdr(hu, MRVL_HDR_REQ_FW);
+	if (ret)
+		goto fail;
+
+	ret = mrvl_dnld_fw(hu, fw_name);
+	if (ret)
+		goto fail;
+	else
+		fw_data->fw_loaded = 1;
+
+	mdelay(MRVL_DNLD_DELAY);
+	/* restore uart settings */
+	new_termios = tty->termios;
+	tty->termios.c_cflag = old_termios.c_cflag;
+	tty->ops->set_termios(tty, &new_termios);
+	clear_bit(HCI_UART_DNLD_FW, &hu->flags);
+
+	ret = mrvl_reset(hu);
+	if (ret)
+		goto fail;
+
+	ret = mrvl_set_baudrate(hu);
+	if (ret)
+		goto fail;
+
+set_term_baud:
+	ret = mrvl_set_termios(tty, 3000000, 1);
+	if (ret)
+		goto fail;
+
+	mdelay(MRVL_DNLD_DELAY);
+
+	return ret;
+fail:
+	/* restore uart settings */
+	new_termios = tty->termios;
+	tty->termios.c_cflag = old_termios.c_cflag;
+	tty->ops->set_termios(tty, &new_termios);
+	clear_bit(HCI_UART_DNLD_FW, &hu->flags);
+
+	return ret;
+}
+
+static void mrvl_print_fw_data(u8 *buf)
+{
+	int i;
+
+	BT_DBG("\nfive_bytes:");
+
+	for (i = 0; i < 5; i++)
+		BT_DBG(" 0x%x", buf[i]);
+
+	BT_DBG("\n");
+}
+
+/* Send ACK/NAK to the device */
+static void mrvl_send_ack(struct hci_uart *hu, unsigned char ack)
+{
+	struct tty_struct *tty = hu->tty;
+
+	tty->ops->write(tty, &ack, sizeof(ack));
+}
+
+/* Validate the feedback data from device */
+static void mrvl_validate_hdr_and_len(struct hci_uart *hu, u8 *buf)
+{
+	struct mrvl_data *mrvl = hu->priv;
+	struct fw_data *fw_data = mrvl->fwdata;
+	u16 lhs, rhs;
+
+	mrvl_print_fw_data(buf);
+	lhs = *((u16 *)(&buf[1]));
+	rhs = *((u16 *)(&buf[3]));
+	if ((lhs ^ rhs) == 0xffff) {
+		mrvl_send_ack(hu, MRVL_ACK);
+		fw_data->wait_fw = 1;
+		fw_data->next_len = lhs;
+		/*firmware download is done, send the last ack*/
+		if (!lhs)
+			fw_data->last_ack = 1;
+		wake_up_interruptible(&fw_data->init_wait_q);
+	} else {
+		mrvl_send_ack(hu, MRVL_NAK);
+	}
+}
+
+void hci_uart_recv_data(struct hci_uart *hu, u8 *buf, int len)
+{
+	struct mrvl_data *mrvl = hu->priv;
+	struct fw_data *fw_data = mrvl->fwdata;
+	int i = 0;
+
+	if (len < 5) {
+		if ((!fw_data->next_index) &&
+		    (buf[0] != fw_data->expected_ack)) {
+			/*ex: XX XX XX*/
+			return;
+		}
+	} else if (len == 5) {
+		if (buf[0] != fw_data->expected_ack) {
+			/*ex: XX XX XX XX XX*/
+			return;
+		}
+		/*ex: 5A LL LL LL LL*/
+		fw_data->next_index = 0;
+		mrvl_validate_hdr_and_len(hu, buf);
+		return;
+	} else if (len > 5) {
+		i = 0;
+
+		while ((i < len) && (buf[i] != fw_data->expected_ack))
+			i++;
+
+		if (i == len) {
+			return;
+		} else if ((len - i) >= 5 &&
+			   (buf[i] == fw_data->expected_ack)) {
+			/*ex: 00 00 00 00 a5 LL LL LL LL*/
+			/*ex: a5 LL LL LL LL 00 00 00 00*/
+			/*ex: 00 00 a5 LL LL LL LL 00 00*/
+			/*ex: a5 LL LL LL LL*/
+			fw_data->next_index = 0;
+			mrvl_validate_hdr_and_len(hu, buf + i);
+			return;
+		} else if (buf[i] == fw_data->expected_ack) {
+			/*ex: 00 00 00 00 a5 LL LL*/
+			hci_uart_recv_data(hu, buf + i, len - i);
+		}
+	}
+
+	for (i = 0; i < len; i++) {
+		fw_data->five_bytes[fw_data->next_index] = buf[i];
+		if (++fw_data->next_index == 5) {
+			mrvl_validate_hdr_and_len(hu, fw_data->five_bytes);
+			fw_data->next_index = 0;
+			return;
+		}
+	}
+}
+
+module_param_string(helper_name, helper_name, sizeof(helper_name), 0);
+MODULE_PARM_DESC(helper_name, "helper file name");
+
+module_param_string(fw_name, fw_name, sizeof(fw_name), 0);
+MODULE_PARM_DESC(fw_name, "firmware name");
diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
index 82c92f1..206677c 100644
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -35,7 +35,7 @@
 #define HCIUARTGETFLAGS		_IOR('U', 204, int)
 
 /* UART protocols */
-#define HCI_UART_MAX_PROTO	9
+#define HCI_UART_MAX_PROTO	10
 
 #define HCI_UART_H4	0
 #define HCI_UART_BCSP	1
@@ -46,6 +46,7 @@
 #define HCI_UART_INTEL	6
 #define HCI_UART_BCM	7
 #define HCI_UART_QCA	8
+#define HCI_UART_MRVL	9
 
 #define HCI_UART_RAW_DEVICE	0
 #define HCI_UART_RESET_ON_INIT	1
@@ -94,11 +95,16 @@ struct hci_uart {
 /* HCI_UART proto flag bits */
 #define HCI_UART_PROTO_SET	0
 #define HCI_UART_REGISTERED	1
+#define HCI_UART_DNLD_FW	3
 
 /* TX states  */
 #define HCI_UART_SENDING	1
 #define HCI_UART_TX_WAKEUP	2
 
+#ifdef CONFIG_BT_HCIUART_MRVL
+void hci_uart_recv_data(struct hci_uart *hu, u8 *buf, int len);
+int hci_uart_dnld_fw(struct hci_uart *hu);
+#endif
 int hci_uart_register_proto(const struct hci_uart_proto *p);
 int hci_uart_unregister_proto(const struct hci_uart_proto *p);
 int hci_uart_tx_wakeup(struct hci_uart *hu);
@@ -182,3 +188,8 @@ int bcm_deinit(void);
 int qca_init(void);
 int qca_deinit(void);
 #endif
+
+#ifdef CONFIG_BT_HCIUART_MRVL
+int mrvl_init(void);
+int mrvl_deinit(void);
+#endif
-- 
1.9.1

Powered by blists - more mailing lists