[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1455657619-12030-7-git-send-email-eric@anholt.net>
Date: Tue, 16 Feb 2016 13:20:19 -0800
From: Eric Anholt <eric@...olt.net>
To: dri-devel@...ts.freedesktop.org
Cc: linux-kernel@...r.kernel.org, David Airlie <airlied@...ux.ie>,
Eric Anholt <eric@...olt.net>
Subject: [PATCH 6/6] drm/vc4: Initialize scaler DISPBKGND on modeset.
We weren't updating the interlaced bit, so we'd scan out incorrectly
if the firmware had brought up the TV encoder and we were switching to
HDMI.
Signed-off-by: Eric Anholt <eric@...olt.net>
---
drivers/gpu/drm/vc4/vc4_crtc.c | 6 ++++++
drivers/gpu/drm/vc4/vc4_regs.h | 14 ++++++++++++++
2 files changed, 20 insertions(+)
diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index 89562904..66499e3 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -188,6 +188,8 @@ static int vc4_get_clock_select(struct drm_crtc *crtc)
static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc)
{
+ struct drm_device *dev = crtc->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
struct drm_crtc_state *state = crtc->state;
struct drm_display_mode *mode = &state->adjusted_mode;
@@ -256,6 +258,10 @@ static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc)
PV_CONTROL_FIFO_CLR |
PV_CONTROL_EN);
+ HVS_WRITE(SCALER_DISPBKGNDX(vc4_crtc->channel),
+ SCALER_DISPBKGND_AUTOHS |
+ (interlace ? SCALER_DISPBKGND_INTERLACE : 0));
+
if (debug_dump_regs) {
DRM_INFO("CRTC %d regs after:\n", drm_crtc_index(crtc));
vc4_crtc_dump_regs(vc4_crtc);
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index 58d4cb3..bf42a8e 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -350,6 +350,17 @@
# define SCALER_DISPCTRLX_HEIGHT_SHIFT 0
#define SCALER_DISPBKGND0 0x00000044
+# define SCALER_DISPBKGND_AUTOHS BIT(31)
+# define SCALER_DISPBKGND_INTERLACE BIT(30)
+# define SCALER_DISPBKGND_GAMMA BIT(29)
+# define SCALER_DISPBKGND_TESTMODE_MASK VC4_MASK(28, 25)
+# define SCALER_DISPBKGND_TESTMODE_SHIFT 25
+/* Enables filling the scaler line with the RGB value in the low 24
+ * bits before compositing. Costs cycles, so should be skipped if
+ * opaque display planes will cover everything.
+ */
+# define SCALER_DISPBKGND_FILL BIT(24)
+
#define SCALER_DISPSTAT0 0x00000048
#define SCALER_DISPBASE0 0x0000004c
# define SCALER_DISPSTATX_MODE_MASK VC4_MASK(31, 30)
@@ -362,6 +373,9 @@
# define SCALER_DISPSTATX_EMPTY BIT(28)
#define SCALER_DISPCTRL1 0x00000050
#define SCALER_DISPBKGND1 0x00000054
+#define SCALER_DISPBKGNDX(x) (SCALER_DISPBKGND0 + \
+ (x) * (SCALER_DISPBKGND1 - \
+ SCALER_DISPBKGND0))
#define SCALER_DISPSTAT1 0x00000058
#define SCALER_DISPSTATX(x) (SCALER_DISPSTAT0 + \
(x) * (SCALER_DISPSTAT1 - \
--
2.7.0
Powered by blists - more mailing lists