[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1455657619-12030-3-git-send-email-eric@anholt.net>
Date: Tue, 16 Feb 2016 13:20:15 -0800
From: Eric Anholt <eric@...olt.net>
To: dri-devel@...ts.freedesktop.org
Cc: linux-kernel@...r.kernel.org, David Airlie <airlied@...ux.ie>,
Eric Anholt <eric@...olt.net>
Subject: [PATCH 2/6] drm/vc4: Bring HDMI up from power off if necessary.
If the firmware hadn't brought up HDMI for us, we need to do its
power-on reset sequence (reset HD and and clear its STANDBY bits,
reset HDMI, and leave the PHY disabled).
Signed-off-by: Eric Anholt <eric@...olt.net>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 29 ++++++++++++++++++++++++++++-
drivers/gpu/drm/vc4/vc4_regs.h | 2 ++
2 files changed, 30 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index c49cb44..d189906 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -497,6 +497,16 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
goto err_put_i2c;
}
+ /* This is the rate that is set by the firmware. The number
+ * needs to be a bit higher than the pixel clock rate
+ * (generally 148.5Mhz).
+ */
+ ret = clk_set_rate(hdmi->hsm_clock, 163682864);
+ if (ret) {
+ DRM_ERROR("Failed to set HSM clock rate: %d\n", ret);
+ goto err_unprepare_pix;
+ }
+
ret = clk_prepare_enable(hdmi->hsm_clock);
if (ret) {
DRM_ERROR("Failed to turn on HDMI state machine clock: %d\n",
@@ -518,7 +528,24 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
vc4->hdmi = hdmi;
/* HDMI core must be enabled. */
- WARN_ON_ONCE((HD_READ(VC4_HD_M_CTL) & VC4_HD_M_ENABLE) == 0);
+ if (!(HD_READ(VC4_HD_M_CTL) & VC4_HD_M_ENABLE)) {
+ HD_WRITE(VC4_HD_M_CTL, VC4_HD_M_SW_RST);
+ udelay(1);
+ HD_WRITE(VC4_HD_M_CTL, 0);
+
+ HD_WRITE(VC4_HD_M_CTL, VC4_HD_M_ENABLE);
+
+ HDMI_WRITE(VC4_HDMI_SW_RESET_CONTROL,
+ VC4_HDMI_SW_RESET_HDMI |
+ VC4_HDMI_SW_RESET_FORMAT_DETECT);
+
+ HDMI_WRITE(VC4_HDMI_SW_RESET_CONTROL, 0);
+
+ /* PHY should be in reset, like
+ * vc4_hdmi_encoder_disable() does.
+ */
+ HDMI_WRITE(VC4_HDMI_TX_PHY_RESET_CTL, 0xf << 16);
+ }
drm_encoder_init(drm, hdmi->encoder, &vc4_hdmi_encoder_funcs,
DRM_MODE_ENCODER_TMDS, NULL);
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index 25df20e..31042a4 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -456,6 +456,8 @@
#define VC4_HDMI_TX_PHY_RESET_CTL 0x2c0
#define VC4_HD_M_CTL 0x00c
+# define VC4_HD_M_REGISTER_FILE_STANDBY (3 << 6)
+# define VC4_HD_M_RAM_STANDBY (3 << 4)
# define VC4_HD_M_SW_RST BIT(2)
# define VC4_HD_M_ENABLE BIT(0)
--
2.7.0
Powered by blists - more mailing lists