linux-kernel - Re: [PATCH] x86/mm: Add x86 valid_phys_addr

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1455737737.2925.280.camel@hpe.com>
Date:	Wed, 17 Feb 2016 12:35:37 -0700
From:	Toshi Kani <toshi.kani@....com>
To:	Dan Williams <dan.j.williams@...el.com>
Cc:	Thomas Gleixner <tglx@...utronix.de>,
	Ingo Molnar <mingo@...hat.com>,
	"H. Peter Anvin" <hpa@...or.com>, Borislav Petkov <bp@...e.de>,
	"linux-nvdimm@...ts.01.org" <linux-nvdimm@...ts.01.org>,
	X86 ML <x86@...nel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] x86/mm: Add x86 valid_phys_addr_range() for /dev/mem

On Wed, 2016-02-17 at 09:58 -0800, Dan Williams wrote:
> On Tue, Feb 9, 2016 at 6:06 PM, Toshi Kani <toshi.kani@....com> wrote:
> > x86 does not define ARCH_HAS_VALID_PHYS_ADDR_RANGE, which
> > leads /dev/mem to use the default valid_phys_addr_range()
> > and valid_mmap_phys_addr_range() in drivers/char/mem.c.
> > 
> > The default valid_phys_addr_range() allows any range lower
> > than __pa(high_memory), which is the end of system RAM, and
> > disallows any range higher than it.
> > 
> > Persistent memory may be located at lower and/or higher
> > address of __pa(high_memory) depending on their memory slots.
> > When using crash(8) via /dev/mem for analyzing data in
> > persistent memory, it can only access to the one lower than
> > __pa(high_memory).
> > 
> > Add x86 valid_phys_addr_range() and valid_mmap_phys_addr_range()
> > to provide better checking:
> >  - Physical address range is valid when it is fully backed by
> >    IORESOURCE_MEM, regardless of __pa(high_memory).
> >  - Other ranges, including holes, are invalid.
> > 
> > This also allows crash(8) to access persistent memory ranges
> > via /dev/mem (with a minor change to remove high_memory check
> > from crash itself).
> 
> If we're modifying crash(8) can't we also teach it to mmap /dev/pmemX
> directly?  With commit 90a545e98126 "restrict /dev/mem to idle io
> memory ranges" /dev/mem should not have access to active pmem ranges.

Yes, I am aware of the commit.  Unloading drivers while using crash(8) to
analyze NVDIMM via /dev/mem makes sense.  /dev/mem does not require any
other drivers be loaded.

Using /dev/pmemX, on the other hand, requires the driver to be loaded,
which can be problematic.  For instance, when btt_init() fails due to some
corruption in arena, it fails to create any pmem device file.  A dev file
also restricts access range within the dev file.

Thanks,
-Toshi

ps.
Looking at iomem_is_exclusive(), it only checks the top-level iomem
entries.  I think the pmem/btt driver only marks a child entry busy...